Hello I have a iPhone 4s worked him a lock Software Claude and I have a tray device please Is there a solution to this problem

Hello I have a iPhone 4s worked him a lock Software Claude and I have a tray device please Is there a solution to this problem

Hi sami jouni,
Please post your question in your native language. Sorry, but what you have provided does not make sense.
GB

Similar Messages

  • I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

    I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

    Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
    If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
    http://roaringapps.com/apps:table
    Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
    My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
    When your ready for new hardware and all new software, then buy a new machine.
    If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
    http://www.bombich.com/get_ready_for_lion.html

  • HT1766 i have a iphone 3gs that needs to be backed up and I have a new computer

    I  have a iphone 3gs that needs to be backed up and I have a new computer

    You can backup only your settings, messages, recent calls, apps and Camera Roll in your new iTunes.
    Your photo albums and music has to be on your computer to sync them back to your iPhone.
    Message was edited by: cheonweb

  • Since installing the newest version of Firefox 4.0, I am unable to access my work e-mail which uses Lotus Domino Web Access. Can anyone please tell me how to correct this problem?

    Since installing the newest version of Firefox 4.0, I am unable to access my work e-mail which uses Lotus Domino Web Access. Can anyone please tell me how to correct this problem?

    Sheesh. That looks hard. I think it will fall over at this point:
    "Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
    Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
    With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
    I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

  • I have a virtual keyboard but it won't sync with my iPad or iphone4 is there a solution to this problem really love my iPad

    I have a virtual keyboard but it won't sync with my iPad or iphone4 is there a solution to this problem really love my iPad
    & iPhone but I want to use my virtual keyboard :( help please ,,

    By virtual keyboard do you mean a Bluetooth keyboard?
    With the iPad, make sure Bluetooth is turned on, Settings > General > Bluetooth - ON
    Turn the keyboard on and see if the iPad recognizes it and pairs.

  • I have just bought Airport Express and now my Skype is slow.  Is there a solution to this - everything else is ok

    I have just bought Airport Express and now my skype is slow.  Is there a solution to this - everything else seems to be working fine

    Parrotcat wrote:
    I have just updated to Lion and now my folders no longer show number of items on the bottom...    
    In the good old days of Snow Leopard, an open Finder folder had a border along the bottom of the window which could show the number of items in that window and the total available space on the hard disk or partition that folder resides on. That bottom border is gone in Lion and those two bits of information are gone with it. Is that what you're talking about? If so, I'd like to learn how to get it back too and "Show Item Info" is not the way.

  • HT1420 No longer authorized to enter the account was used to five devices have exhausted all attempts to please you to the solution to this problem I reside in recursion and I'm not good at English Language

    No longer authorized to enter the account was used to five devices have exhausted all attempts to please you to the solution to this problem I reside in recursion and I'm not good at English Language 

    MMS will be available for the 3G and 3GS in two weeks - on Friday, September 25th - likely with a carrier update made available via iTunes.
    In the interim - for the next two weeks, ask the sender of an MMS to address the MMS to an email address that you access with the iPhone's Mail client - the sender will enter your email address in the To: field for the MMS instead of your cell phone number with area code. The MMS will be received by you as an email with the photo as an attachment. This will give you the sender's cell phone MMS email address. Add this email address to the contact's info in your iPhone's address book. If you want to send an email with a photo attached as an MMS to this person, address the email to their cell phone MMS email address. The email with the photo attached will be received as an MMS.
    This will be required for another two weeks.

  • HT4484 i used to have an app store and lost it and i created a new one and i can not update the iphoto app because it was updated with the old account, is there a solution for this problem?

    i used to have an app store and lost it and i created a new one and i can not update the iphoto app on my macbook pro because it was updated with the old account, is there a solution for this problem?

    Content and Apple IDs -
    Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

  • My new iPhone 4S has hearing problem.speaker and headphone works very good.However using handset to make and receive calls I cannot hear anything?I did restore the phone and removed the plastic.Is there any solution to this problem please?

    I am having heraing problem with iPhone 4S.Speaker and headphone works well.No echo.When I use handset to receive or make calls,I can't hear anything?I restore the phone and removed the plastic as well.Is there anyway to fix this problem?

    I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
    Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
    Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
    But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
    Have you tried a bluetooth headset yet?

  • My iPhone 5 on EE 4G goes straight to voicemail when people call me and I'm connected to LTE?  Is there a solution to this other than turning off 4G?

    When I am connected to LTE (EE network) my iphone 5 goes straight to voicemail and I can't receive calls?!  Anyone know a solution to this problem?

    Hi
    I have just spoken to EE about this very issue.
    Apparently the sim is timing out the call before you even get it and passes it to voicemail.
    I was given the following 2 codes by their support to "call" with the phone.
    ##002**89#
    ##002**11#
    Then re-boot the phone.
    This effectively turns off the automatic re-route to voicemail but standard voicemail when not reachable still works.
    I still need to play with the voicemail settings a bit but it seems to work.
    Second.
    I was also getting an issue where I was simply loosing service at random times even though I was not moving.
    THIS issue apple is woking on.  The problem is cause when moving between 3G and 4G signals, sometimes the phone just looses the service.
    A fix for that (Till apple comes up with one) is to simply go into settings and turn off LTE unless you really need it.

  • Firefox freezes when going to a site or page that requires Flash Player, such as YouTube. I have the most updated version of Flash. Is there a solution to this problem?

    I'm having trouble visiting sites or pages that require Flash Player, Firefox will just freeze when they're partially loaded and it will stay frozen until I close Firefox. This will happen with any page that uses flash player. I can disable it, but then I can't access the content which requires Flash Player, have to use a different browser and I'd rather just use Firefox.

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • My IPHONE 3GS is bricked and popping (-1) error in restore. It just got bricked over night. Is there any solution to this problem

    My Iphone was bricked when i woke up one day . It was showing restore screen so i restored it but while restoration it showed (-1) error. Is There any method to resolve this problem.

    I know very well how to restore Iphone. 
    The restoration process struck at baseband upgrade and restoration process ends with -1 error.

  • "Your iPhone could not be activated because the activation server is temporarily unavailable." i tried it many times in DFU mode buy it not working .. i tried micro sim cards but it definitely not word :( please anyone can help me fix this problem

    "Your iPhone could not be activated because the activation server is temporarily unavailable." help me please ..

    I have same message. Just tried the update yesterday. Phone NOT jail broke and my SIM card has been init since I bought it. I need my phone and information ASAP. Is backed up on comp but can't get to without phone! During update my laptop shut off. Problem started after I started it back up to finish the process. Why would that make a diff? What to do now???? Help!

  • TS1702 most of my apps are stuck on 'waiting' have tried everything possible from trying to delete them and re-booting ipad, nothing seems to work...is there a solution to this problem which seems that quite a few users seem to have....

    most of my apps are stuck on 'waiting' have tried everything possible from what I read however nothing seems to work for me, does anyone know the right way PLEASE as it's very annoying....

    When I open emails with PDFs I click on the attachment (doing this all on my iPad) it gives me the option to "open in iBooks", I accept then after that the document is sucked into my iPad but I can't do anything with the PDF after that.  Where is the actual file on my iPad? Why can't I email or send these PDFs to my cloud (Dropbox)?
    It's like once they go into iBooks they're stuck forever.

  • "Plug in container for firefox has stopped working." I'm getting this message a dozen times a day. Is there a solution to this problem?

    AdapterDeviceID: 0x29c2
    AdapterVendorID: 0x8086
    Add-ons: support%40lastpass.com:3.1.1,%7B16112ED0-B86A-4F27-AB40-FFF5C21B5CE7%7D:1.7.20,donottrackplus%40abine.com:3.2.1127,%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:31.0,troubleshooter%40mozilla.org:1.1a,%7Bb9acf540-acba-11e1-8ccb-001fd0e08bd4%7D:7.33
    AvailablePageFile: 982695936
    AvailablePhysicalMemory: 475660288
    AvailableVirtualMemory: 223985664
    BIOS_Manufacturer: American Megatrends Inc.
    BlockedDllList:
    BreakpadReserveAddress: 44040192
    BreakpadReserveSize: 41943040
    BuildID: 20140716183446
    CrashTime: 1408782723
    EMCheckCompatibility: true
    Email: [email protected]
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1406704955
    Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x29c2, AdapterSubsysID: 2a6f103c, AdapterDriverVersion: 7.15.10.1666
    WebGL? EGL? EGL+ GL Context? GL Context+ WebGL+
    OOMAllocationSize: 262144
    ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 77912
    StartupTime: 1408730250
    SystemMemoryUsePercentage: 85
    Theme: classic/1.0
    Throttleable: 1
    TotalPageFile: 8274350080
    TotalPhysicalMemory: 3210231808
    TotalVirtualMemory: 2147352576
    URL: https://mail.aol.com/38711-111/aol-6/en-us/Suite.aspx
    Vendor: Mozilla
    Version: 31.0
    Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [UDP/IP] : 2 : 2 :
    MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
    MSAFD Tcpip [UDP/IPv6] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [RAW/IPv6] : 2 : 3 :
    RSVP TCPv6 Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    RSVP TCP Service Provider : 2 : 1 :
    RSVP UDPv6 Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    RSVP UDP Service Provider : 2 : 2 :
    MSAFD NetBIOS [\Device\NetBT_Tcpip_{26C4A30D-B8B2-4C9C-B793-483C184A55A2}] SEQPACKET 1 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
    MSAFD NetBIOS [\Device\NetBT_Tcpip_{26C4A30D-B8B2-4C9C-B793-483C184A55A2}] DATAGRAM 1 : 2 : 2 :
    MSAFD NetBIOS [\Device\NetBT_Tcpip_{36BAEAD1-EF38-46E9-89FF-E9BAA40EF42A}] SEQPACKET 6 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
    MSAFD NetBIOS [\Device\NetBT_Tcpip_{36BAEAD1-EF38-46E9-89FF-E9BAA40EF42A}] DATAGRAM 6 : 2 : 2 :
    MSAFD NetBIOS [\Device\NetBT_Tcpip6_{50750E4D-AD6B-45E8-A580-16B81237F6D4}] SEQPACKET 0 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
    MSAFD NetBIOS [\Device\NetBT_Tcpip6_{50750E4D-AD6B-45E8-A580-16B81237F6D4}] DATAGRAM 0 : 2 : 2 :
    MSAFD NetBIOS [\Device\NetBT_Tcpip6_{2C935239-6765-4394-9733-898A975A8DB8}] SEQPACKET 4 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
    MSAFD NetBIOS [\Device\NetBT_Tcpip6_{2C935239-6765-4394-9733-898A975A8DB8}] DATAGRAM 4 : 2 : 2 :
    MSAFD NetBIOS [\Device\NetBT_Tcpip6_{26C4A30D-B8B2-4C9C-B793-483C184A55A2}] SEQPACKET 2 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
    MSAFD NetBIOS [\Device\NetBT_Tcpip6_{26C4A30D-B8B2-4C9C-B793-483C184A55A2}] DATAGRAM 2 : 2 : 2 :
    MSAFD NetBIOS [\Device\NetBT_Tcpip6_{36BAEAD1-EF38-46E9-89FF-E9BAA40EF42A}] SEQPACKET 7 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
    MSAFD NetBIOS [\Device\NetBT_Tcpip6_{36BAEAD1-EF38-46E9-89FF-E9BAA40EF42A}] DATAGRAM 7 : 2 : 2 :
    useragent_locale: en-US
    This report also contains technical information about the state of the application when it crashed.

    Your System Details List shows multiple Flash plugins.
    *Shockwave Flash 14.0 r0
    *Shockwave Flash 13.0 r0
    You can find the installation path of all plugins on the <b>about:plugins</b> page.
    *http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
    You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
    *(32 bit Windows) C:\Windows\System32\Macromed\Flash\
    *(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\

Maybe you are looking for

  • Buzzing sound appeared again- hp pavilion ultrabook 14-b006sa

    hp pavilion ultrabook 14-b006sa- windows 8 I ve tried the Troubleshooting tool in Windows 8,but there each speaker seems to work properly. I have instablished the most recent Audio driver update from HP, 'IDT High-Definition (HD) Audio Driver', as yo

  • GS60 2PE Ghost Pro - Windows install

    Hi, I've recently bought a GS60 2PE Ghost pro which come with a SDD and a HDD with Windows 8.1 installed. I would like to do 2 things and would like to know the best way to do it : - Moving windows onto HDD - having Ubuntu 14.10 on SSD (this will be

  • Cost price in TTPO flow

    hello, in our TPPO flow (sales order - purchase requistion - purchase order - invoice on purchase order - SD invoice to customer), we seem to have a problem with the cost price. in the sales order, a cost price is correctly determined price in the pu

  • IPhone 4S camera will not focus

    My iPhone 4S camera is not focusing, it is the camera on the back. One time I tried to take a photo of a document on paper and it just wouldn't focus on the writing, I turned my phone off and on and then it seemed to be working and focusing again. Re

  • [How-to] Evaluate dynamically an ABAP Constant

    Hello, Do you know how I can dynamically/programatically retrieve the value of a defined constant in an ABAP Class having the name of the Constant. I tried using the CLASSDESCR of the class to retrieve all attributes of type "constant", but I am not