Hello, I have a Macbook pro retina-2013. About Mavericks I could set my 4K monitor via HDMI on 2560x1440. This I can not set at Yosemite. Can someone help me there?

They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
Call Verizon's wireless tech support & explain your problem to them. They will provide "step-by-step" instructions over the phone.
Take notes too!
TIP: If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything. The automatic voice will then say, "will connect you to a service rep."

Similar Messages

Hello, I have a Macbook pro retina-2013. About Mavericks I could set my 4K monitor via HDMI on 2560x1440. This I can not get through at Yosemite. Can someone help me there?

Hello, I have a macbook pro retina-2013.
About Mavericks I could set my 4K monitor via HDMI on 2560x1440.
This I can not get through at Yosemite. Can someone help me there?

They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
Call Verizon's wireless tech support & explain your problem to them. They will provide "step-by-step" instructions over the phone.
Take notes too!
TIP: If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything. The automatic voice will then say, "will connect you to a service rep."

Hello, I have a MacBook pro retina 13" early 2013, and i am not sure if I can use a 4k2k display Monitor with my Macbook, please help!

Hello, I have a MacBook pro retina 13" early 2013, 2,6 GHz Intel Core i5 and Intel HD Graphics 4000 1024MB,
and i am not sure if I can use a 4k2k display Monitor with my Macbook, please help!

Hello, Righten.
Thank you for visiting Apple Support Communities.
I understand that you want to know if your MacBook Pro will support a 4k display. Here is an article that will answer your question.
Using 4K displays and Ultra HD TVs with your Mac
Cheers,
Jason H.

MacBook Pro retina 2013 do not start and no light on the magsafe

Hello
I have a MacBook Pro Retina 2013 13' core i5 2.5 8gb ram
My mac was open, connect to the sector with full power. I left it the time to lunch and when i came back maybe 2 hours after my mac was off, and no light on the magsafe.
Impossible to start it.
I tried the key sequence, nothing worked.
I used the magsafe of a friend who have the same model, i had i green light for 10s before it turn slowly off. and nothing worked too.
One of my neighbor on the same building, had the same problem at the same time, computer open (not a mac) and it turn off impossible to start it, he had to disconnect/reconnect the battery to solve the problem.
May it be a power surge?
Did i need to open it and disconnect the battery on the motherboard?
Thank you for your help.

A Few things to try if you haven't already:
1. Try unplugging the charger from both the wall and from your MacBook Pro. Now, make sure the powerpoint the MacBook was connected to works by plugging it in any electrical appliance you have. After unplugging the test electrical appliance and verifying that everything is OK with the electrical source, wait a minute or two and just plug the charger back into your MacBook and the powerpoint.
2. A possible problem could be a MagSafe port not working correctly. Look for any kind of debris inside the port that might prevent it from connecting the power adapter correctly to your MacBook. On the adapter, take a quick look at the DC connector for any type of debris and carefully check if any of the pins are missing, are bent, or stuck down.
3. Try a quick restart. Just press CMD CTRL ALT EJECT For about 5 seconds.
4. Try CMD, CTRL and POWER for about 5 seconds.
5. If none of this works, my last suggestion is removing the battery connecters and power supplies ect and holding the power button for a few seconds and reconnecting everything.

MacBook Pro Retina 2013 stuck on boot every time after iPhone 5S is connected to it.

I have a MacBook Pro Retina 2013 and I've noticed that every single time I connect the iPhone 5S to it at the next boot the Mac hangs.
Booting in Safe Mode will eventually work (after about 20 minutes).
I can reproduce this every single time with this combination. Any advice?

You can try resetting the PRAM and SMC, but both of your devices are new. You can just make a Genius Bar appointment and let them figure it out.
SMC
http://support.apple.com/kb/ht3964
PRAM
http://support.apple.com/kb/PH14222

13" macbook pro retina 2013 problem: blank screen when waking up from standby

I bought a 13" macbook pro retina 2013 about 3 months ago and it is for about a week or two that I encountered a problem: when I close the lid and open it after a while(or it goes to standby by not using it for some time and then I wake it up by pressing a button), sometimes it shows a blank dark screen(with mouse cursor) for about 15 seconds and then either the screen is turned off(and by pressing a key it shows the login screen) or it shows the normal login screen.

I also have this problem, and now the
NVIDIA GeForce GT 650M is not working at all
I use gfxCardStatus for work on integrated card and i can't use other displays obviously, because all video outputs (HDMI & Thunderbolt) are taking their ways from discrete card (but working on other displays is my profession of audiovisual artist). My world guarranty is over now, new motherboard costs near 1500 $ and now i don't want what to do.Maybe reballing of videochip will help me, but i'm afraid that not autorised service in my country will kill my motherboard at all. This is my first mac & i have lost many time for take the money for buyng it. I have so much frustration.

MacBook Pro Retina 2013 15" 2.8Ghz i7 OVERHEATING

Hi,
I have MacBook Pro Retina 2013 15" 2.8Ghz i7
I use istat fan is set to max about 5500rpm. Temperature in idle ( clean reinstall just with istat menus, chrome, geekbech ) is about 80C when I try run geekbench temperature is about 105-110C so is very hot.
Thanks for advice.
If I take to Apple Store can help my there ?

Hello MarkKiss
Check out the article below about the operating temperature for your MacBook Pro. If you are still concerned, there are links within the article for further assistance.
Mac notebooks: Operating temperature
http://support.apple.com/kb/HT1778
Thanks for using Apple Support Communities.
Regards,
-Norm G.

My MacBook Pro retina 2013 won't charge. I've checked all connections which are all ok. Little red light shows on magnetic plug, instead of usual green.

My MacBook Pro retina 2013 won't charge. I've checked all connections which are all ok. Little red light shows on magnetic plug, instead of usual green.

If you are seeing a Red LED, you may have a faulty MagSafe Adapter.
I remember reading that the orange light is produced by a combination of a Red and Green LED. If that's the case, It seems that the adapter isn't lighting the green LED properly at that time.
I would suggest you seek service with your nearest Genius Bar (Apple Retail Store) or Apple Authorised Service Provider as they have access to diagnostics which may assist in isolating any hardware issues you may be experiencing.
Cheers.

MacBook Pro Retina (2013) and Photoshop Elements 12 or Lightroom 5?

I have moved to a new MacBook Pro Retina (2013) from my old Windows 7 PC. As an amateur photographer which is better - Photoshop Elements 12 or Lightroom 5?

Lightroom is already optimized for the retina display and PSE12 looks superb on the Macbook pro R. You are never going to get a retina display much larger than 15 inches but once tried you would never wish to go back to other monitors. It’s not just photos; all Apple apps on the MBPr including web browsing are optimized.
Large monitors can be great if you are soft proofing images for print enlargements or for editing and rendering video where the extra real estate is useful. So it comes down to need. In general, images appear sharper on smaller displays. I upload most of my photos to my own website and Google Analytics tells me that a high proportion of my visitors are increasingly viewing on iPads, tablets and smartphones. For me that makes the MBPr ideal for my photo editing. It has far superior clarity compared with the excellent 27 inch Dell Ultra Sharp monitor on my desktop machine.
The only caveat is that nobody really knows the life of flash storage. Some say four years when writing continuously to the SSD drive and less once you start moving from unused space to overwriting. For that reason I always try to write to an external hard drive or SDXC card; reserving the SSD, as far as possible for running the applications.
I think we are getting a bit off-topic as the OP already has the MBPr and only needs to decide between PSE & LR or both.

Hello, I have a Macbook Pro 2011, and put an SSD on it. Yesterday i upgrade to Yosemite and sadly mi trim is not supported .... I really need (and demand) a solution to this, because like i see in the manual of the mac, Iam allowed to install a disk.

Hello, I have a Macbook Pro 2011, and put an SSD on it. Yesterday i upgrade to Yosemite and sadly mi trim is not supported .... I really need (and demand) a solution to this, because like i see in the manual of the mac, Iam allowed to install a disk.

Try a Safe Boot to clear the dyld_shared_cache (dynamic loader cache)
SafeBoot http://support.apple.com/kb/HT1564
Safe Boot, which automatically rebuilds this cache (among other things).

I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

tyler57,
it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port.

Very good. I have a macbook pro retina 15 "First Generatio.

Very good.
I have a macbook pro retina 15 "First Generation.
I read that you can not increase the memory or video card to me is worrying that neither the apple house can do that, because it is way too expensive equipment, not to increase capacity.
I do not think that's impossible, I would like to know about this is disturbing please.
Thank you.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Hello, I have a Macbook pro which runs under 10.5.8. I want to use a PC interface. been told I need to purchase paralellDestop 6, Windows & Microsoft 2008licence?

Hello, I have a Macbook pro which runs under 10.5.8. I want to use a PC interface. I've been told I need to purchase paralell Destop 6, Windows licence and Microsoft Office 2008 for PC. Is that correct ?

If you have a MacBook Pro with 10.5, that's usually a machine that's getting long in the tooth and thus running Windows as a virtual machine (one OS inside another) will likely be slow.
Also spending all that money for Windows (VirtualBox is free) and Office seems like almost a waste of effort if the machine is going to die suddenly.
MacBook Pro's last about 4-5 years.
To do what you want your going to have to upgrade OS X to 10.6, then either buy VMFusion or Parallels which they are now catering to 10.7 and 10.8 users, so it's slow on 10.6, or use the free VirtualBox which will run well on 10.6. Then buy a copy of Windows 7 as earlier Windows versions are not being sold, then Office 11 or whatever.
You can also install OfficeMac into 10.6, if they still sell a copy.
You see your outdated really, and anything that can work is soon to be ignored etc.
What I would consider doing instead, since your not a OS upgrade type of person (we are on 10.8 now which won't run on your machine or be extremely slow) is to buy yourself a decent Windows 7 laptop and install Office into that. Some have the demo already inside and all you have to do is activate it.
This way you get your Windows experience and Office experience, don't have to fiddle with complicated virtual machine software, or Apple's problematic Bootcamp etc as Apple really is leaving 10.5 and 10.6 users behind, and by next summer will be leaving 10.7 users behind too.
Windows 7 laptop will be the cheapest and least stressful option for you, you can continue to use the Mac until it drops dead of course.
I say this because your on 10.5, your like most computer users, just a computer user and not a geek.
You obviously have some reason you need Office, likely for a job or school and since 99% use Windows and Office, then that's what you should be using.
If your only needing Office or Office like program for something temporary, then I suggest you install the free LibreOffice into OS X, however I don't know if it will run in 10.5, you might have to upgrade to 10.6 via the 10.6.3 white retail disk, however Apple doesn't sell it anymore, but perhaps Amazon or elsewhere does.
Sorry, you have been out of the upgrade loop for quite some time, so a new machine is in order as that one is about to die soon, so I wouldn't be spending too much on it really.
If you have a fat wallet you can buy a new Mac with 10.8, and have Windows 7 installed in BootCamp (direct boot) and also into VMFusion or Parallels (copies the Bootcamp Windows so you can use both) and Office for you. It will come all set up, enter your password and use the machine.
I think OtherWorld Computing will sell you a pre-configured Mac all set up like that for you, Apple won't do it though.
You can also pay a local PC/Mac specialist to do the same.
Don't forget setting up a backup system for both Windows and OS X, add anti-malware software in Windows, you'll need that.
IMO a new Windows 7 laptop would be the cheaper, less stressful option, Learning Bootcamp and virtual machine software can be a pain if your not computer savvy, al;so Apple has a nasty habit of upgrading the operating system constantly, now on a annual basis. You don't upgrade and all your third party software, then your denied security updates in short order. Windows 7 laptop will last a decade on the same version, only needing simple updates, not upgrades.
If you want your Windows machine to last even longer, like a decade, then get a desktop tower instead of a laptop.
Mac's are for those who can handle a lot of change, as Apple is about always inflicting change. It's costly change too.
Good Luck
Windows in BootCamp or Virtual Machine?
Things to consider before upgrading OS X

Hello, I have a Macbook Pro 17'' 2.4 GHz Intel Core i7 (2011). I dont know what happened but the pixels on black or dark areas on my monitor are displayed in a flickering red color, and on white areas are light blue. Any idea??

Hello,
I have a Macbook Pro 17'', 2.4 GHz Intel Core i7 (late 2011). I dont know what happened but the screen shows red flickering pixels everywhere where it should be black, and light blue pixels where it should be gray, I had this problem twice, the first time it just disappeared by itself. Now it's been like this for days, I have really no clue.
Anyone with the same problem or solution?
This is how it looks like:
Thanx

Is that a camera picture or a screen-shot? Is there any difference? i.e., can you capture the problems in a screen shot, or not?

I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

It's beta open source software so I'm not surprised. It does't look to be too active a project, so I don't know if it will help or not but you might be maybe better off posting a bug report on their Sourceforge page here: http://sourceforge.net/projects/kompozer/

Hello, I have a Macbook pro retina-2013. About Mavericks I could set my 4K monitor via HDMI on 2560x1440. This I can not set at Yosemite. Can someone help me there?

Similar Messages

Maybe you are looking for