Hello i have a problem when i start woorksheet, my computer crash with blue screen sometimes.

hello i have a problem when i start woorksheet, my computer crash with blue screen.
OS: Win 2000 pack 2 and dasylab 7.00.05 ;ddi7.02 ;nidaq 7.0
I hve this problem sometimes and need to reebot my computer.This worksheet is used to generate 4 signals to output and have an acquisition tooin this 4 channels.
The error is in the blue screen:0x00000076 (0x00000000 , 0x81358300, 0x000001c2, 0x00000000).
Thanks for your help.

The DASYLab development team has read your message, and advises that there is insufficient information to be able to even start diagnosing the problem. We suggest that you send a note directly to [email protected], with your full contact information, DASYLab serial number, and the following technical information:
-The Help-->Report information - this will tell us more about the computer, video and installed memory
-Installed hardware - what DAQ devices are you using (exact models!)
-The worksheet that crashes - we need to see how the timing is configured in the worksheet
-What other programs are running at the same time?
-Does the worksheet crash every time?
-Does the NI-DAQ Test Panel work correctly for both inputs and outputs?
Sorry that we cannot be more help in this forum; we do not have much experience with blue screen under Windows 2000. This is very hard to do, and is almost always related to a hardware problem - either a resource conflict, or problems with one of the installed hardware devices (DAQ, Video, Memory...).
Regards,
-cj
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Similar Messages

Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you

Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

My iphnoe5S always crash with blue screen,sometimes can`t start up

my iphnoe5S always crash with blue screen,sometimes can`t start up

Hello liuqinqin,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
Have a nice day,
Mario

I have a problem, when i start the project i open the browser window and whenh i select a clip premiere stops working!!!

i have a problem, when i start the project i open the browser window and whenh i select a clip premiere stops working!!!

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Hello, I have a problem when I activated my iPhone, it says "Your iPhone could not be activated because the activation server is temporarily unavailable" and I tried wifi and iTunes ?

Hello, I have a problem when I activated my iPhone, it says "Your iPhone could not be activated because the activation server is temporarily unavailable" and I tried wifi and iTunes

opluffi9z wrote:
Hello, I have a problem when I activated my iPhone, ...
See this discussion.
https://discussions.apple.com/message/21189708

HT1386 I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".

I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".
PLAESE advise how to solve this problem.

Hi applerinneedforhelp,
Thanks for visiting Apple Support Communities.
If iTunes is asking you to authorize the computer, and you've already done so, the troubleshooting steps in this article can help:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Regards,
Jeremy

Satellite M40X-169 when connected to wireless unit shuts down with blue screen and restarts

Hello.
I got the problem with my notebook when i'm connecting and getting connected to the wireless network. My notebook is shutting down with blue screen error and then restarts.
Maybe you can help me to solve this problem, because i can normaly work when i need to be connected.
Plaese help me.

Hi
It is not easy to give you some precise answer but try to remove WLAN card from device manager and restart the unit. You can also check Toshiba download page and try to install the latest WLAN card driver.

I have a problem when i started de download it says that you have a mistake to load this content

Somebody help me when I started to download a movie it says that you have a mistake to download this content

Same problem, to be honest i am trying now to restore configuration. Let us see

Why does my computer crash to blue screen with message when Photoshop is open?

This happened 3-4 times when I was using the trial version and I wasn't sure which program from the trials that was doing it, but it started after I downloaded and used the Adobe Clound trials so I stopped using them. Eventually I went ahead and upgraded to the subcription and have been using Illustrator and Muse for a few days now and have not had a problem until today. I had Photoshop open and minimized, as well as Illustrator, and walked away from my desk. When I returned, the screen was blue with the Windows "shut down to prevent further damage" screen. I have a photo of the message. I realized that I had been using Photoshop the last few times this happened also. It never happened before I tried this software and stopped when I stopped using the trial.
I contacted support and chose to have someone call me back due to the wait. 15 minutes later, I got a call back from India and exlplained this. He got my phone number and asked me to hold while he got someone to help me. ONE HOUR AND 20 MINUTES later someone from India came on and I explained it all over again. He said he was going to check into it and 5 minutes later I was DISCONNECTED. No one called back and there is no option for Adobe, but to call back and start the process ALL OVER AGAIN. From what I see in these forums, it happens all the time and is serious problem with Adobe.I would never do business with a company with this type of horrible support and don't think I will continue my subscription with them. I am a graphic designer and do not have the time for computer crashes and support that does not care.

Thanks, Bill. Your response has been the most helpful. I have not yet tried the steps in your articles, but have a little more info that may help narrow it down. However, it has not happened for a couple weeks. I run a large CAD progam that also has never caused this issue.
The blue death screen occurs only when PS is open and when the computer goes to the screen saver. When I wake my screen this message is there:
"A problem has been detected an windows has been shut down to prevent further damage to your computer.
The problem seems to be caused by the following file: win32k.sys
PAGE-FAULT-IN-NONPAGED-AREA
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed. I this is a new installation, ask you hardware of software manufacturer fo any windows updates you might need.
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable such components, restart your computer, press F8 to select Advanced startup options, and then select safe mode.
Technical Information:
*** STOP: 0x00000050 (0xE57C1304, 0x00000000, 0xBF8892C3, 0X00000001)
*** win32k.sys - Addre4ss BF8892C3 base at BF800000, DateStamp 4ff2f633"
Beginning dump, blah blah blah.
After this happenend 2-3 time after installing the PS trial, it was obvious that it was the only software change I had made. I stopped using it and went back to using my PS4 and the blue screen never happened again...until I purchase my subscription and used it again. I don't know if any of this helps narrow down what I can test, but you have given me the most knowledgeable feedback. Thanks again.

Each time I connect to my IBM computer it crashes with blue screen error message pops up. Apple say that it's my printer/camera drivers. The problem is with iTunes, it likes to play with all the ports on my comp and conflicts with prnt drivers. How to fix

Does anyone know how to fix this problem without disabling my printer. It's very frustrating. It's either I have my iPad or my printer. iTunes likes to play with the ports on my computer thereby causing a conflict with my printer drivers. Apple should fix this problem, I'm so annoyed.

When this problem first happened, I searched for threads and found a few. See be;ow links:
http://support.apple.com/kb/TS1502
Apple say that its a driver problem, but I've never had this problem before so I am not convinced. Another thread, which I can't seem to find, suggests that it is an apple problem - itunes plays with the ports on the company causing conflicts with existing drivers. I isolated the conflict to my new Samsung printer. I uninstalled the Samsung printer driver and then can successfully connect my ipad without the blue screen appearing.
It's not a windows problem. Windows is working fine. Only happens when Ipad is connected. Actually, this first happened after I installed the new version of itunes. I reget installing the new itunes version, but don't know how to reinstall the previous itunes version.

Hello, i have a problem when i want to download an app it asks for my secret question and answer but i forgot it how can i solve this problem please help?

Hello today I wanted to download an app on my ipod touch infact its a game and as usual it asked for my appl id and password so I entered them but next it asked me to enter my passowrd againg and answer the secret question I submited when I first got my Ipod touch, the problem is i cant remember the question neither the answer,so is there a way I can find out what my secret question is and the answer of course I would appreciate youre help.
Fouad

Only you and Apple know your secret question. See if changing the password via email will allow access to your account.. Then you can chnag yur secret question. See:
http://support.apple.com/kb/HE36

Ehi, I have a problem: when I start a call I hear a echo so i can't hear nothing... answers?

ok?

Hi Cai96!
I have an article here for you that addresses this issue and can provide some troubleshooting steps for you:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Hello, I have windows vista, When I start up firefox, it does not respond. I end up starting it up 3-4 times then it eventually opens with 3-4 tabs open to my home page. It will never startup on the first try.

firefox does not reponde on initial startup. I have updated everything.

You can open the about:config page via the location bar and do a search for jzip via the Filter at the top of the about:config page. 
You can reset all jzip related prefs via the right-click context menu to their default values.

Problem when I start up my computer since installing Lion

I have just installed Lion. Now whenever I open my Macbook Word, Adobe, Mail, etc all open up.
How can I stop this happening?
Thanks

Welcome to the iOS world of nonthinking, wherein the OS decides everything for you, whether or not that's what you want. Salient details described in http://www.apple.com/macosx/whats-new/features.html#resume
See these for steps to resolve: http://hints.macworld.com/article.php?story=20110918051930924 and http://osxdaily.com/2011/08/01/turn-off-resume-per-app-in-mac-os-x-lion/

I have a problem when running my own EJB as a TUXEDO service using WTC.

Hello,
I have a problem when running my own EJB as a TUXEDO service using WTC. I am using TUXEDO 8.1 and WL 9.1.
When I am trying to run my own EJB as a TUXEDO service error appears.
TPENOENT(6):0:0:TPED_MINVAL(0):QMNONE(0):0:Could not find service TOUPPER
at weblogic.wtc.gwt.WTCService.getImport(WTCService.java:4988)
at weblogic.wtc.gwt.TuxedoConnection.getImport(TuxedoConnection.java:303)
at weblogic.wtc.gwt.TuxedoConnection.tpcall(TuxedoConnection.java:1302)
at examples.MyTestSessionBean.Toupper(MyTestSessionBean.java:102)
at examples.TestSessionBean_knby6k_EOImpl.Toupper(TestSessionBean_knby6k_EOImpl.java:61)
at net.roseindia.web.servlets.SessionTestServlet.doGet(SessionTestServlet.java:69)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
e8
10
java.rmi.RemoteException: EJB Exception: ; nested exception is:
java.lang.NullPointerException
at weblogic.ejb.container.internal.EJBRuntimeUtils.throwRemoteException(EJBRuntimeUtils.java:95)
at weblogic.ejb.container.internal.BaseEJBObject.handleSystemException(BaseEJBObject.java:713)
at weblogic.ejb.container.internal.BaseEJBObject.handleSystemException(BaseEJBObject.java:681)
at weblogic.ejb.container.internal.BaseEJBObject.postInvoke1(BaseEJBObject.java:447)
at weblogic.ejb.container.internal.StatelessEJBObject.postInvoke1(StatelessEJBObject.java:72)
at weblogic.ejb.container.internal.BaseEJBObject.postInvokeTxRetry(BaseEJBObject.java:374)
at examples.TestSessionBean_knby6k_EOImpl.Toupper(TestSessionBean_knby6k_EOImpl.java:75)
at net.roseindia.web.servlets.SessionTestServlet.doGet(SessionTestServlet.java:69)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Caused by: java.lang.NullPointerException
at examples.MyTestSessionBean.Toupper(MyTestSessionBean.java:130)
at examples.TestSessionBean_knby6k_EOImpl.Toupper(TestSessionBean_knby6k_EOImpl.java:61)
... 15 more
Any clue on this.
With Regards,
MVS

If you are trying to create a Tuxedo service in Java using WTC you need to develop an EJB that implements the TuxedoService interface and register its home in JNDI so WTC can look it up. Once that is done you can then export the service to a remote domain in the WTC configuration.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Hello i have a problem when i start woorksheet, my computer crash with blue screen sometimes.

Similar Messages

Maybe you are looking for