Hello i have a slight issue with my iPhone 4s... Blue screen?

I purchased my iphone 4s in November of 2012. Yesterday my phone was on the coffee table and I pressed the lock button and it is all blue with black lines. I can still use siri and hear it but i can't see anything. If i take a screen shot on my lock screen and plug my iphone into my macbook it shows up perfectly fine? It rings and vibrates and charges and everything works fine, I just cant see anything. I do not have a insurance and my upgrade is in November, I am NOT looking to get an android phone, because that is what some of my friends told me is the best option.I really just want to know what the problem is and how I can fix it. I would appreciate it if someone could respond very soon. Thank you.

That's a hardware failure. Make an appointmet at the genius bar of your local Apple Store. An out of warranty replacement will cost you $199.

Similar Messages

  • Hello there, i have a major issue with my iphone 3g, it ran out of battery yesterday and now it won't charge or turn on at all, can anyone help??

    hello there, i have a major issue with my iphone 3g, it ran out of battery yesterday and now it won't charge or turn on at all, can anyone help??

    Apple Does Not recommend that. Please Read.
    http://support.apple.com/kb/HT1490
    From that article
    "Portables with built-in batteries"
    Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
    MacBook 
    MacBook (13-inch, Late 2009) and later
    MacBook Air
    MacBook Air (all models)
    MacBook Pro
    MacBook Pro with Retina display (all models)
    MacBook Pro (13-inch, Mid 2009) and later
    MacBook Pro (15-inch, Mid 2009) and later
    MacBook Pro (17-inch, Early 2009) and later
    Thanks.
    Allan Mac wrote:
    Apple recommend calibrating the battery when you buy a new Macbook and then every few months, or monthly if it used on mains all the time. This, as Apple says is to keep the battery operating at maximum efficiency. When the battery discharges and shuts the macbook down, it still has reserve power for a good number of hours. There is also a logic board battery to hold various settings.
    I rather think I will take Apples advice on using their equipment not yours, but I would be intrigued to discover what is it you know that Apple doesnt about its batteries?
    Allan

  • Hello' I am having an issue with my iPhone 5 display. 2 days before i've noticed some horizontal and vertical lines on the display. Minor but noticeable. Specially in dark wallpapers and on full brightness. Is it normal?? Please Help!!!

    Hello' I am having an issue with my iPhone 5 display. 2 days before i've noticed some horizontal and vertical lines on the display. Minor but noticeable. Specially in dark wallpapers and on full brightness. Is it normal?? Is this a software bug or Hardware problem?? Please Help!!!

    Hello,
    No, it is not normal. Follow this article:
    http://support.apple.com/kb/ht1414
    If this doesnt solve the issue your iPhone will need service.
    Burcu

  • I have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

    i have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

    Warranty and support is only valid in the country of origin.  The only exception being the EU where a device bought in any EU country can get warranty or service in any EU country.
    Warranty is determined by device (serial number), no documentation required.
    Apple does not repair devices, they replace them.  For that reason, ensure the device is backed up and any pictures take with the device are copied off the device prior to going in for service.

  • Issue with USB ports and Blue Screen

    So, I had to send my Satellite L355-S7905 back and Toshiba had to do a factory restore.  I got it back 2 weeks ago and now I have a new problem; 2-3 times a day my mouse and printer stops working, these are connected via USB ports and I get a message that the device is no longer recognized.  I found a solution on the Microsoft site to go to Device manager and Scan for new hardware changes and then Restart.  I do this and when I restart I get the dreaded blue screen.  So I then have to unplug, take out the battery and turn the computer back on.  Then the mouse and printer are recognized.  This will work for several hours and then the whole thing happens again.  So, are there any long term solutions?  Can anyone tell my why this is happening?  Please note, that that the printer and mouse are not new and no new hardware has been installed since getting it back from the factory.
    Thank you for your help!!
    Jennifer

    start-->control panel-->system and security-->device manager-->expand the universal serial bus controllers-->right click and uninstall all of the USB root hubs-->restart-->they will reinstall on restart, and search for attached hardware.

  • Hello, i have a technical issue with Photoshop CS 5.0 on a Mac and file source on a SBS2011

    In a company we have 5 Mac (4 iMacs and one MacPro), they use Adobe CS 5.0 Photoshop, the Files wich they want to edit are stored on a Windows Server SMB Share, sometimes ( at 2 of 10 cases) if the user want save there work, Photoshop stops, say "they have no write permissions on the share" also the file will be deleted on the share . Does anybody know what happen? The Windows Server is an SBS 2011 and the share is not at the System Partition. The connection between the Mac clients and the Windows Share is 100Mbit/sec
    Also in the Network are Windows Clients wich does not use this share.
    I have add one Mac to the ADD and also use a domain User but here is the same issue.
    Did someone have a helping workarround?

    In a company we have 5 Mac (4 iMacs and one MacPro), they use Adobe CS 5.0 Photoshop, the Files wich they want to edit are stored on a Windows Server SMB Share, sometimes ( at 2 of 10 cases) if the user want save there work, Photoshop stops, say "they have no write permissions on the share" also the file will be deleted on the share . Does anybody know what happen? The Windows Server is an SBS 2011 and the share is not at the System Partition. The connection between the Mac clients and the Windows Share is 100Mbit/sec
    Also in the Network are Windows Clients wich does not use this share.
    I have add one Mac to the ADD and also use a domain User but here is the same issue.
    Did someone have a helping workarround?

  • My MacBook Pro will connect to WiFi but will not work in one location but will at others. I have the same issue with my IPhone 4S at the same location.

    My MacBook Pro will connect to Wifi at one location (this is a secure location) but will not allow access to the internet.  I will put in the password but will not display page.  Other wifi capable devises do not have this issue but my Mac and my Iphone 4S will not work.  I have tried restarting the router.  All other wifi locations I have been to have not had this issue.  Any suggestions? I am realtively new to Apple products (less than a year) so any advise is greatly appreciated.

    The other devices that are working got on with the same password.  It says it is connected.  Just nothing works on the internet.

  • Hiya i have a slight problem with my iphone 4

    Hy all
    I have a little problem, my iphone 4 is water damaged and i know i need to get the dock unit and speaker changed as they dont seem to work cos theres no sound but it does activate the phone when plugged into a power source. I have changed for a new battery and the phone works fine but when the battery is connected and the phone is either on or off it gets extremely hot by the battery connector. As soon as i unplug the battery and turn the phone on by plugging into a power source the heat dissapears. I have 2 iphone 4 batterys and cant imagin they are the problem but could well be, was just wondering if anybody has had a similar problem. And yes iv done all the resetting and closing programs and things.
    Could it be the motherboard? Although iv had that out and its clean as a whistle
    Many thanks for any help

    The iPhone is not user servicable. You are walking around with a fire hazard in your pocket. Find a competent repair shop or purchase a new phone.  Since you've opened it, it is no longer eligible for the $149 out of warranty replacement you could have gotten from Apple.

  • I have lot of issues with iphone it ***** after spending so much money!!!

    I have lot of issues with the iPhone. First I cant forward the messages that people sent me, second you can't receive or send a picture mail directly from phone to phone, the sounds and the speaker is so low you can barely hear and has lot of static when you turn on the speaker phone, and you cannot connect to itunes store with the internet you have through AT & T it keeps asking you for Wi Fi and says cannot connect to itunes store, and you can't send address to other phones that really *****
    I mean these features are so simple any cheap phone can do it why not iphone they say it is so advance over the other phones. apple should really work on this. i think that is the reason people still prefer black berries or other phones. iphone is cool as they say it is but it is not that impressive at all if you can do basic features like these!!!!

    Did you do any research before buying your iphone?
    "First I cant forward the messages"
    Always been that way
    " you can't receive or send a picture mail directly from phone to phone"
    Yes you can. People can send an MMS to your e-mail address, instead of your phone number. You can e-mail a pic to their phone - they will receive as n MMS. Do a forum search as this has been explained thousands of times.
    "you cannot connect to itunes store with the internet you have through AT & T"
    It is called the itunes wi-fi store for that very reason.
    " you can't send address to other phone"
    Again, nothing new.
    Perhaps you should spend more time researching before you spend the money.
    If you are within the return window, take the iphone back to the store and get you money back - less restocking fee - consider it the cost of not researching.

  • Kelly speca is having battery issues with new iPhone 6 plus.

    Hi this is Kelly Speca,
    I have a serious issue with my iPhone 6 plus. While watching movies or rather playing some basic games,the battery drains out very fast. It is a s fast as that I have to charge the phone almost 2 times a day...Also the phone touch screen becomes unbarely hot.So can anyone help me with some suggestions..
    Thanks,
    Kelly Speca.

    It may be worth your while to engage with Apple in a chat online or go to an Apple store. It seems as if you have some hardware issues that need to be sorted out
    But here is a test I would do to check the battery drain:
    1. Do this at night before going to bed
    2. use app switcher and close all apps
    3. Go into settings - cellular and turn cellular data off
    4. Put phone in airplane mode
    5. Charge phone to 100%
    6. Then un hook it from the charger and let it sit overnight and see what the battery percentage is, in the morning
    This will tell you if the battery itself is not performing up to par......

  • Hello, I have the usual issue to use AcroExch.PDDoc/AcroExch.App/AcroExch.AVDoc objects in Visual Basic (MS EXCEL). On my company's machine I have Acrobat X and everything works fine, but I have another machine with just "Reader" installed - is there als

    Hello, I have the usual issue to use AcroExch.PDDoc/AcroExch.App/AcroExch.AVDoc objects in Visual Basic (MS EXCEL). On my company's machine I have Acrobat X and everything works fine. I am looking for the cheapest solution to get the stuff running on another machine... is there any way to do that with the Acrobat SDK, or do I need to purchase a full version of Acrobat XI ($$) ?

    The Acrobat SDK is nothing by itself. It is just information on how to automate Acrobat - just as the Office SDK doesn't include Office, but is for people who already have purchased Office but want to automate it.
    These automation things are MARKETING TOOLS FOR ACROBAT. Consider this and the technical limitations make a lot more sense.
    So, yes, you need to buy Acrobat. Standard is cheaper than Pro.

  • Hello i have purched new computer with windows 8 and cannot sync with my ipod nano

    hello I have a new computer with windows 8 and itunes works perfectly however it will not sync with either of our ipods.

    Hey azduck,
    Thanks for the question. I understand you are having issues syncing your iPod nano with iTunes for Windows. The following articles may help to resolve your issue, based on your symptoms:
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Additionally, you may find the following article helpful:
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Thanks,
    Matt M. 

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

  • I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies

    I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?

    try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
    most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard)

  • I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC

    I have found an issue with MS13-098 which causes systems to be renamed to  MINWINPC.  The issue has been reported in Japanese by Microsoft. The translation is:
    Phenomenon
      In Windows Server 2008 or Windows Vista, you might not be able to log an error appears to apply the new update the following programs, if you try to log on after the restart. •  MS12-024 (KB2653956)
    •  MS13-098 (KB2893294)
     Error message displayed is as follows.
     Incorrect password or user name
      Back to the top | feedback
    Collapse image  Cause
      This behavior occurs when you apply the update KB2653956 in the state of some data is damaged following registry key, or does not exist.
     HKEY_LOCAL_MACHINE \ SCHEMA \ wcm :/ / Microsoft-Windows-CoreOS? ...
     Any string will contain the part of the ... Note:.  Also, make sure to load the SystemRoot% \ system32 \ SMI \ Store \ Machine \ SCHEMA.DAT file% if the HKEY_LOCAL_MACHINE \ SCHEMA does not exist.
     When you apply the update of KB2653956 in the state where the registry key is not present, the value of the following registry is changed to MINWINPC, logon will not be able to.
    •  HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ActiveComputerName
    •  HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ComputerName
      Back to the top | feedback
    Collapse image  Solution
      If this occurs, change to the correct computer name the value of the ComputerName registry and ActiveComputerName start in safe mode, has been mentioned above, and then restart.
      Back to the top | feedback
    Collapse image  Workaround
      To prevent this phenomenon occurs, you download and run the System Update Readiness Tool from the following KB.
     http://support.microsoft.com/kb/947821
     By performing the system update Preparation tool registry that is described in Section Symptoms are repaired.
     If the repair is made, starting with log Recreated missing key as the following WinDir% \ Logs \ CBS \ CheckSUR.log file% is recorded.
     Recreated missing key:? Wcm :/ / Microsoft-Windows-CoreOS ... \ metadata \ elements \ ComputerName
     In addition, regardless of the presence or absence of entry damaged Microsoft-Windows-CoreOS, you can set the value of the ComputerName key in this tool.  For this reason, the following log is recorded in the CheckSUR.log.
     Recreated value: @ _type.
     Recreated value: @ dataOnly.
     Recreated value: @ default.
     Recreated value: @ description.
     Recreated value: @ displayName.
     Recreated value: @ handler.
     Recreated value: @ legacyName.
     Recreated value: @ legacyType.
     Recreated value: @ migrate.
     Recreated value: @ scope.
     Recreated value: @ xsd: type.
      Back to the top | feedback
     Note: This is a "FAST PUBLISH" article created directly from within the Microsoft support organization.  It contains information in response to emerging issues are listed.  As a result of the speed of information provided may be
    typographical errors are included in the article, you might be revised at any time without prior notice.  For other considerations, and use conditions
     Please refer to.
      Back to the top | feedback
    Collapse image  Property
      December 11, 2013 - Revision: - Last Review: 2901584: 4.0 Document Number
      This document that was written about products for.
    •  Windows Vista Business
    •  Windows Vista Business 64-bit edition
    •  Windows Vista Enterprise
    •  Windows Vista Enterprise 64-bit edition
    •  Windows Vista Home Basic
    •  Windows Vista Home Basic 64-bit edition
    •  Windows Vista Home Premium
    •  Windows Vista Home Premium 64-bit edition
    •  Windows Vista Starter
    •  Windows Vista Ultimate
    •  Windows Vista Ultimate 64-bit edition
    •  Windows Server 2008 Datacenter
    •  Windows Server 2008 Datacenter without Hyper-V
    •  Windows Server 2008 Enterprise
    •  Windows Server 2008 Enterprise without Hyper-V
    •  Windows Server 2008 for Itanium-Based Systems
    •  Windows Server 2008 Foundation
    •  Windows Server 2008 Standard
    •  Windows Server 2008 Standard without Hyper-V
    •  Windows Web Server 2008
    •  Windows HPC Server 2008
    •  Windows Essential Business Server 2008
    We are having the issue on hundreds of systems and I am rolling out the readiness tool mentioned above to prevent other systems from being affected.  In the mean time I have stopped deploying MS13-098 and am hoping Microsoft will go ahead and let all
    of their customers know about the problem instead of just one country.  Hopefully the original bulletin will be updated with this known issue.

    PPoj,
    Apple has offered replacement or pro-rated refunds in the US as a settlement of a class action lawsuit, not because of pride in their design-centric approach to their products. If you seek a similar replacement/refund program in India, then the odds are pretty good that you’d need a similar legal approach with which to convince Apple to offer a similar program there. If you’re unwilling to wait for such an event, then you can purchase a replacement power cable now, and hope for a pro-rated refund at some point in the future.

Maybe you are looking for

  • Can't change still length

    When I import stills into my movie, I can change the length by putting the cursor at either end. I get a bar with arrows on either side. I can't get the bar with just one arrow on it. That's not my real question. My main problem is later on I'm tryin

  • DATE RULES

    hi all can some one please help me out in framing my own date rule where i want to set current date as date and time against the date to be updated on its own with the reference of current date. full marks will be given for help

  • Error in number range when creating new material

    Hi All, We just recently changed the number range format of our material master. Earlier it was numerical and no it contains alphanumeric data. To do the change, in the material type i selected the option "External Number Assignment w/o check". Now i

  • Good way to initialize clusters and parse files into them

    I'm writing a small application to open some sonar .xtf files and look at their data.  The format is published and I have done a crude job of building a cluster and initializing it...then reading the file header and parsing it into the cluster so I c

  • What can replace my GeForce 2Ti Pro-VT?

    I have a GeForce 2Ti Pro-VT (MS-8836), and am looking for a replacement as I'm giving this card to my dad. Is there a similar MSI card (with video IN/OUT) available? I've tried to find one in the MSI product list, but only the top end cards have vide