Hello I have a white MacBook when I switch it , the apple is still loading, and the window of aceuille not displayed! ,

hello I have a white MacBook when I switch it , the apple is still loading, and the window of aceuille not displayed! ,
<E-mail Edited by Host>

Try the not-charging topic of:
iPod touch: Hardware troubleshooting
It could be that the battery is dead.

Similar Messages

I have carried out a restore on my iphone3gs and now the screen as frozen, the apple picture is showing and the sun dial timer but it wont do anything

I have carried out a restore on my iphone3gs and now the screen as frozen, the apple picture is showing and the sun dial timer but it wont do anything

You can call AppleCare and request a replacement set of the original DVD's that shipped with the computer for a nominal charge. You will need the serial number (look on the bottom of the stand) and a credit card. Click the AppleCare Contact Info link. Without knowing which iMac you have it's very difficult to say if a new SL disc would work or not.

When I boot up my machine, the apple logo comes up and the little pinwheel comes up as if it is loading up. Then another screen comes up stating "you need to restart your computer. Hold down the power button for several seconds...." any thoughts?

I have already tried to start in safe mode. No go. I tried the single mode option as well. Volume ok. I don't have the os x disc. The computer was given to me because they could not fix the problem. Not computer smart. Does anyone have any ideas?

Apple may still supply the original restore CDs/DVDs for a nominal fee. Have your serial number and model information available when you call them. You do not have to be the original owner.
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
Apple Phone Sales 1-800-692-7753
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
"You have to call Apple & likely ask for a Product Specialist to get it (Leopard), if they still have it... helps if you tell them you have a new iPhone (iPad) that needs it!"
BDAqua
Requirements for Mac OS X v10.5
http://support.apple.com/kb/HT3759

HELP! My iTunes library has disappeared so when I open iTunes it's blank. All the files are still there and the data is on my iPod, how do I restore it??

This happened about twenty minutes ago and I'm frantic trying to get it back.
I've tried all the stuff I can find online, turning it off and on again and nothing will work!
I even tried restoring old libraries to see if that would work but still nothing!
HELP I'M DESPERATE!!

Hello iainhoey
Follow the steps in the article below to roll back the previous iTunes library file to get back your iTunes library.
No content shows up in iTunes after updating
http://support.apple.com/kb/ts1967
Regards,
-Norm G.

Please help my iMac will not start. The apple logo comes up and the wheel goes round and then I am left with an empty white sceen can anyone help

Please help, my iMac will not start up, the apple comes up and the wheel goes round but then I am left with a blank white screen. Has anyone any ideas.

Locate your original install disk (it's grey) and use it to restart your iMac by holding the "C" key during startup. Use the disk utility to repair your harddrive.

White macbook 13inch are there are cases that will still fit this computer?

I have a white macBook 7,1 intel core 2 Duo 2.4 GHz
and i need to purchase a case, i know this model is old and discontinued
but are there any similar cases that will still fit this computer?

You might check iFixIt. Also, check eBay.

HT3964 I have a MacBook Pro that will not boot up. The apple symbol Read more: I have a MacBook Pro that will not boot up. The apple symbol is there and a spinning wheel continues to spin. Any options??

I have a MacBook Pro that will not boot up. The apple symbol is there and the spinning wheel keeps spinning. Any idea how I can fix this?

Reinstall OS X.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
OR
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

We have a very big issue here, Patch Tuesday didn't work correctly yesterday, and the patches took all the free drive space away.

Hello
We have a very big issue here, Patch Tuesday didn't work correctly yesterday, and the patches took all the free drive space away.
Before we started with the Patches, we had one Gig of free space on our hard drive, now we are down to less than 10 Megs!!!
What happened is that the patches didn't work, we had to try them 7 times, and every time they created a 'temporary restore point' which we don't know where that point is.
The server has crashed twice since, we were able to place it back online but we're afraid it will crash again.
We have several customers on that server, we are very worried,
Can you please help us?
Thank you

Hi,
Hope the below article be helpful:
Clear space on your hard drive by deleting old Windows uninstall folders
http://news.cnet.com/8301-13880_3-9862223-68.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
And as far as I know, we could not use diskpart to extend C drive, 3rd party utilities may work, please go through the below thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/03068ecb-7edd-43d8-bc68-12bc466c583f/how-to-extend-the-windows-2003-c-drive?forum=winservergen
Regards,
Yan Li
Regards, Yan Li

TS3276 When I add a name to the "To" box or CC/BCC box and then change my mind about sending an email to them, Mail is ignoring the instruction to "remove" so that once the email has been sent, their name is still included and the email goes to them anywa

Can anyone help? When sending an email and I add a name to the "To" box or CC/BCC box which I later decided I don't want to include, Mail ignores the instruction to "remove" that name so that once the email has been sent, the name is still included and the email goes to them anyway. Pretty frustrating and I don't understand why this is happening.

You would really have to ask the app developer if there is a way to export the data.
As for adding a printer, you would need to purchase an AirPrint compatible printer and connect it to your wireless network.
By the way, your holiday letter/rant/Idon't even know what to call it... is completely inappropriate for these forums.

I have a white MacBook. I just changed out the hard drive with a 500GB. When I turn it on I get a file fold with a ? In the middle that flashes. What do I do next?

I have a white MacBook and I just changed out the hard drive with a 500GB. When I turn it on I get a file fold with a ? In the middle that flashes. What do I do next?

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I have a white Macbook 2009 on OSX Lion. It came with the OSX Snow Leopard CD, I erased the HDD and am trying to install the OSX from disc but am getting "cannot install OSX from disc" message. What can I do?

I have a white Macbook 2009 on OSX Lion. It came with the OSX Snow Leopard CD, I erased the HDD and am trying to install the OSX from disc but am getting "cannot install OSX from disc" message. What can I do?
I got the macbook from a friend a few years ago and it already had OSX Lion installed. Whenever it boots from the Snow Leopard disc it says it cannot install from disc. Is there anythingI can do or should I take it to an Apple store to get them to boot OSX Lion for me?

Insert your Snow Leopard disc and restart, press and hold the C key as soon as you hearthe startup chime, hold C until you see the Apple Logo. When your computer starts up you'll be at the first install screen, choose your language and click the arrow to go to the next screen. This screen has a menu bar, from the Utilities menu select Disk Utility, select your hard drive, this is the one with the manufacturers name or numbers, click the partition tab and then delete any existing partitions by selecting them and clicking the minus. In the drop down box select one partition and click apply. Name your hard drive and click erase. When it's done quit DU and go back to the installer, install Snow Leopard. When the installer is done and the computer is back up and running run Software Update to get to 10.6.8

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine. Any ideas on how to get 5.0 working?

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, W

I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

My Macbook Pro *****! I have had it for 2 weeks now, got it brand new at the apple store, it freezes all the time, and reboots itself, sometimes when i start it, purple dots cover the screen and i have to hold the power button.

I have had it for 2 weeks now, got it brand new at the apple store, it freezes all the time, and reboots itself, sometimes when i start it, purple dots cover the screen and i have to hold the power button. a 2 week old computer is not supposed to do this! it wastes all its time being so flashy that it just craps out all the time. sometimes i feel like i should have stayed with my virus covered PC. at least when it shut down randomly you could turn it back on, but with the macbook pro, it just keeps restarting itself over and over. need help with this, any answers?

Here's a novel thought. Take it back to the vendor. Should have done that one week ago.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device"

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

I've got a 15" white macbook which I bought about 2 years ago. It froze the other day and wouldn't respond so I shut it down. When I turn it on now it comes up with a flashing file with a question mark on it. How can I fix it?

I've got a 15" white macbook which I bought about 2 years ago. It froze the other day and wouldn't respond so I shut it down. When I turn it on now it comes up with a flashing file with a question mark on it. How can I fix it? I've tried a few things i've seen online but the futhest ive got is to put the start up disk in when you makes it go to a grey screen with an apple logo and the spinning wheel which then stops spinning. Can anybody help?

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once.It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left handlist. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Hello I have a white MacBook when I switch it , the apple is still loading, and the window of aceuille not displayed! ,

Similar Messages

Maybe you are looking for