Hello, I have a Windows 7 Pc where Lightroom 5 is on installed. When I open a photo using " verkenner" I see a good coloured photo. When I open a photo via Lightroom 5, the photo will be too dark. This gives difficluties during shaping the photograph. C
Hello,
I have a Windows 7 Pc where Lightroom 5 is on installed.
When I open a photo using " verkenner" I see a good coloured photo.
When I open a photo via Lightroom 5, the photo will be too dark. This gives difficulties during shaping the photograph. Can someone help me to solve this problem?
Kind Regards,
Marianne
Into the Develop module Not all the sliders in the Basic Panel are at 0.
Temperature ° is on 5600
Colourtint is on + 30
Balans: slider in the middle
History panel:
Balans gespitste tinten -3 0
Balans gespitste tinten -3 3
Similar Messages
-
Installed Yosemite and iPhoto 9.6. A lot of my photos are now too dark and the colour is way off from the originals. Any suggestions to correct this mess. I did a backup prior to installing Yosemite and iPhoto 9.6.
Check the monitor settings in the System/Displays/Color preference pane. You may have to change the color profile used or calibrate the monitor.
Also check the System/Accessibility preference pane to see if the Increase contrast checkbox is checked. If it is check it and see if there's any improvement. -
Hello
I have an I mac with Yosemite operating system.
I installed a windows seven 64 bit on it.
also i have a parallels desk top with version 10.
if i run my windows without parallels my windows and my office is activated ,but if i run my parallels then my windows and my office can not be activated .
My problem is activating my windows and office through parallels desktop .
i had installed windows an parallel desktop several times ,also i installed several times parallel tools with menu bar in parallels desk top and when i am installing parallels desktop tools in any way i can see the (CTRL+ALT )
all of my application in windows works properly through parallels desktop except
activation of office and windows .
I do not no any solution for my problem , i need for helps .thanksIt is not W10, it is the Technical Preview version of W10.
Search on the Windows forums (fora for the latinist) for activation in the TP W10. -
I have a windows 7 64 bit os . Downloaded and installed iTunes for 64 bit os.Try to open ,it tells me , The file
"iTunes Library.itl" cannot be read because it was created by a newer version of iTunes . Any suggestions ?zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Hello,
I have MacBook Late 2008 (Unibody). And I can't install this firmware MacBook SMC Firmware Update 1.5
Need your help.
ThanksAlso, according the the 1.4 update page here: http://support.apple.com/kb/DL974
It will update the Boot ROM version (on MB 5,1) to MB51.007D.003.
Yet I have (MB 5,1) Boot ROM version MB51.007D.B03. Weird again!
What a mess Apple. Considering how important firmware updates are you'd think they could make this a little clearer.
Anyways, again, I don't think we need it. -
hello,i have a macbook air and i downloaded warblade(with utorrent)and when i try to open it opens in textedit.it shows a looooong text and signs.
It does sound like you downloaded the Windows version. OS X doesn't know what to do with file and just opens it up in Text. You can download the Mac version directly from C/NET - Download.com:
http://download.cnet.com/Warblade/3000-2099_4-10834246.html?tag=mncol;2 -
I have a windows 7 64x SP1.
Every time I install iTunes 12 I get this message when I try to open it:"This copy of iTunes is damaged and it has not been correctly installed. Please, install iTunes again.(-42404)".
The instalation process runs smoothly without any error message and iTunes has been installed in my computer before. The problem started with the update no. 12. Any idea what's going on? Thank youif itunes will not run, you probably have mangled windows badly
one feature of windows 8 is the refresh that saves libraries,
because you are using windows 7, you will need to backup all files to another storage device -
I have a Window 7 HP laptop. I want to install Snow Leopard on an external hard drive as the memory space on my laptop is very less. I have the original snow leopard disc and I think it's a retail version . Please guide me through the installation in details. Can you also please let me know about this boot camp.
You cannot. From a legal standpoint, the license agreement for OS X mandates that you run OS X only on Apple hardware. HP is not (yet) owned by Apple.
From a technical standpoint, your HP laptop doesn't use EFI, but rather an early predecessor called a BIOS. Apple is the only vendor of consumer computer hardware that uses EFI; other vendors reserve EFI for use in servers.
Secondly, Apple's operating systems support a rather limited number of configurations of video hardware and mainboard chipsets directly since they need only support those systems that they manufacture. You cannot use Windows software or drivers on OS X, so prior to installation, you would need to write your own hardware drivers for your laptop, create an OS X drive image on a Mac, and then modify that image with your drivers before putting it in the HP.
It will be simpler (and legal), to simply purchase a used Mac. Apple's online store has refurbished MacBook Airs starting at $850 and Mac Minis for $700. If you go to e-bay or craigslist, you'll find used Macs for considerably less. -
On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?
Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
Apple store,just wanted to check on how to change my area settings in itunes from United States to United Arab Emirates(that's where i stay).it got changed when i tried to download google maps from the US store in itunes.please help me out here.Thanks
Please please help me, if you know how.
-
Hello, I have a Mac OS X, and can't seem to install the creative cloud, I get this pop-up message when I try
Er is geen programma ingesteld om de URL 'aam://?passPhrase=QDdPo8BTHv975B1B1f0x3anMggUxp4allBf lsm629RgGXV22ocIlQfI9TMW5vkteaQquFNIFB1uDwU18Z268e69Er6M8XCttQjvdYYdLJ9biyCRQF931 MyMPR0rGvrenZ0e2iougs4l9mlOAHDsfQEDOaqfVInflnZ9 FZSMc=' te openen.
So basically it said that I don't have a program to open it? I already had a trial version on my mac, but deleted it..YasmineH your web browser is blocking the installation of the AAM Detect plug-in. I would recommend using a different web browser or installing through the Creative Cloud Desktop application. You can find additional details on how to install the Adobe Creative applications included with your membership at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
-
Hello, I have a macbook air Mac OS 10.10.1 I download java because i need to use Facebook video chat, I already had java. now the computer is telling me overtime i start my computer that i need to download a java complement. what can i do?
Hi AnibalG,
Thanks for the question. Based on what you stated, it seems like you need to download Java. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Java for OS X 2014-001
Thanks for using Apple Support Communities.
Cheers,
Mario -
I have an iMac, running x10.5. My email is very slow, even opening a previously downloaded message. The computer is otherwise fast. What gives?
Go to your User's Library folder. (if you don't know how to find, see this link.)
Scroll to Mail folder.
Select the V2 > MailData folder.
Delete any files in MailData with envelope in the name. (should be 3)
When you open Mail it will re-index your files.
If you have IMAP accounts, you might want to delete the accounts then add back so they download all messages from the server again. -
Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying to visit apple support. Please help me, I don´t want to loose my ipod.
Hi thenicegirl07,
It sounds like your Click Wheel iPod is showing a sad iPod icon. If it will go into Disk Mode you may be able to restore it, take a look at the article and quote below for more information about the alert and possible resolutions.
iPod displays a sad iPod icon
http://support.apple.com/kb/ts1373
Resolution
In most cases, the sad iPod icon indicates a hardware issue. If you are able to force iPod into Disk Mode, then it may not be a hardware issue, and you should try to restore your iPod with the latest software.
If you cannot force your iPod into disk mode and restore it, then your iPod is in need of service. Set up an iPod Service Request or make a reservation at the Genius Bar before visiting your local Apple Retail Store. To make a reservation:
Go to http://www.apple.com/retail/storelist/.
Choose an Apple Store location.
Click the Reserve link under Genius Bar.
Choose iPod.
Select your desired reservation date and time.
For an easy to follow QuickTime movie, view the Troubleshooting & Extras section of the iPod Tutorials atwww.apple.com/support/ipod/tutorial.
Additional Information
iPod displays a folder icon with an exclamation point
-Jason -
I have an icon on my MAC desktop called disk utility. When I click it on it a message says it is not compatible with this version of OS X. Can I then delete this set of files?
gjspross wrote:
I did upgrade and here is the current version: OS X 10.8.2 (12C60)
I was able to get to and open disk utility through Application> utilities
I thought the disk utility icon on the desktop may be related to my old software. I was going to move it totrash but it had over 2000 files and so I did know if it was still being used or could be moved to trash.
What kind of files are in there? Sounds like a carry over from your last system. DiskUtility should only be kept in Utilities with a shortcut in the dock or an alias on the desktop, idealy.
Cheers
Pete
Maybe you are looking for
-
Itunes doesn't recognize my ipod nano
I have an I-Pod Nano. I'm pretty sure it's generation 4, maybe 5. It doesn't have a camera, I know that. The device keeps shutting off. Windows hardly ever recognizes it. I-tunes never does. Can anyone help? I want to reload the software onto
-
How can i find my ipod touch 5th g that has been stole (it does have icloud but it says that it needs internet connection) i dont know what to do now plz help
-
Capturing multiple clips from one mini dv tape
i have been having trouble using the 'capture project' option. i can capture individual clips, but would like to set them all before hand and have the computer go through and capture them all at once. this seems to be possible, but when i click 'capt
-
Error with receiver HTTP adapter
Hi all, my scenario is the following : ORDERS05 -> iDoc Adapter -> XI -> HTTP adapter ->URL I get the following error when calling the HTTP adapter : HTTP client. Code 108 reason Error Category = PLAINHTTP_ADAPTER Error ID = ATTRIBUTE_CLIENT First we
-
How do I crop an image to 3.5 x 5
I'm trying to match the size and aspect ratio of an older photo. The old photo was printed at 3.5" x 5.0". How do I crop an image with Aperture to 3.5x5.0? Thanks.