Hello i Have a xserve that needs a new power supply can anyone help
Hello i Have a xserve that needs a new power supply can anyone help
XServe Power Supplies are readily available, either through Apple support or from a variety of third parties:
You don't mention which XServe model you have, which may change things, but these might be good starting points:
http://www.welovemacs.com/xserve.html
http://store.apple.com/ie-business/product/MA945ZM/A
http://www.google.com/search?client=safari&rls=en&q=xserve+power+supply&ie=UTF-8 &oe=UTF-8
Similar Messages
-
Since installing 7 I cannot get facetime and imessage to activate. I have taken all the steps that have been recommended in supportbut still nothing. I get a text of characters that mean nothing everytime i try. Please can anyone help?
Thank you!Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Above is from:
http://support.apple.com/kb/TS3694 -
I have an iphone 4, with ios 4.3.3. I want to update it but when I connect it to itunes it says that it is the latest version of the software. So I cannot update it, and I need it very bad. Can anyone help me?
What version of iTunes do you have installed? If you are trying to update to iOS 6 you need iTunes 10.7 or later.
-
Hello i have a problem with a game on game center can you help me?
hello i have a problem with a game on game center can you help me?
Perhaps, but you will need to provide a little more detail.
-
I am trying to move a picture that I brought over from iWeb and it is locked. I need to move it. Can anyone help?
It is probaly just "inline" ie part of the text.
click on it > Inspector > Wrap > Floating
Peter -
I'm trying to move my photos from my iphone to my PC, every time I go to my Computer it comes up with PhotoStream and iPhone , unfortunately this does that have all my photos from iPhone in it. Can anyone help me?
I'm using the most up to date software.
ThanksThanks for that, on the sync via iTunes, when my iphone is connected to iTunes via USB my photos tab says my iphone but I can never see any pics there. If I press Sync it still doesn't show anything.
Correction from my original post, it only comes up with PhotoStream on my computer when I'm connected via USB. -
I am trying to transfer the licence of a Dreamweaver CS3 Macintosh product. A transfer of licence form has been signed by the person that gave it to me. Can anyone help me to complete the process as Adobe chat say they cannot to help? They told me the forum is looked at by an expert team. Anyone there? Thanks
Did you complete your form as well? A form needs to be completed and signed by both parties and submitted to Adobe support via a support ticket. Chat support cannot help, but should have pointed you to the KB article with the instructions.
Transfer an Adobe product license -
blackberry agenda does not synchronize, even thought hey mentioned that he did??..can anyone help)
Hello Zeni,
Ensuring your daughter is able to communicate while she's mobile is extremely important. I'm terribly sorry for the mobile number change disabling her sim card.
One good suggestion here from the community was to remove the sim card and reinsert it. I do want to elaborate on that a bit. You should have the phone completely powered off and I would recommend the sim to be out for at least 30 seconds.
Put the sim back in and power the phone back on. Hopefully that will kick it into gear on the database side. If not the new sim will work.
I can't apologize more for this and I hope all is well now.
If you have any questions please feel free to ask!
Thanks,
MelissaM_VZW
Follow us on Twitter @vzwsupport -
I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?
I reconnected the original powered hub that I thought probably caused the problem and this time it shut down the whole computer. When I rebooted everything now works perfectly. The system reset. I tried another powered hub and it didn't have the same effect so the old one is heading for the bin and with fingers crossed all systems are now working perfectly. Trying to reset PRAM or reset the SMC didn't work but causing the same power issue did. Thanks for your input though. It did get me to think what was the original cause.
Cheers
Guy -
I cannot open pdf files that are emailed to me. Can anyone help?
I cannot open pdf files that are emailed to me. Can anyone help? I have adobe reader XI.
What operating system? Email client? What exactly means "cannot"?
-
hi i am from ireland and moving to canada i want to take my apple imac is this possible or do i need a new power supply?
A gentle reminder. Unless you will be permanently resident in Canada and have a Canadian based banking/credit card arrangement you may not be able to buy from the Mac App store or iTunes.
-
iPhone 5 - Videos not playimg where i left off. I have all the setting set to ' where left off ' can anyone help please.
SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D -
I am trying to make a signature in MS Word (2007) which includes a jpg image, but when I save it as a HTML file and attach it the text appers OK but the image doesn't. I have tried various formats but still no luck. Can anyone help? edit
C'mon! Anyone???? I'm desperate!
-
How can i turn my iphone 4s into an ipod touch, the phone has been deactivated and has been recovered, i also do not have a sim card for the phone... can anyone help me.
http://support.apple.com/kb/ht3406
Apple recommended process -
I changed my password and used the new computer, next time I tried to log in it wouldn't accept the password. I tried the old one as well but that doesn't work either. Can anyone help?
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.
Be sure to open Keychain Access and repair the keychain:
Assuming that you are using a recent build of OS X, go to /Applications/Utilities and launch the app called Keychain Access. Go to the Window pulldown menu and select "Keychain First Aid". Enter your password, set the radio button to "Repair", and click "Start".
Maybe you are looking for
-
Yes, so, as I was saying... for example when I place a 300ppi jpg into my new document it's huge, like almost 5 times the size of my document. Is this something to do with some kind of default setting to design at 72ppi to save on memory? In photosh
-
Finding a power supply for my HP PC
I have the HP m9340f with a 350W power supply, I am interested in upgrading it to a 500w psu, namely this one http://www.newegg.com/Product/Product.aspx?Item=N82E16817438012. Does anyone know if that computer can handle the 500w psu. This question w
-
Creative Zen Vision data cable: where to buy o
I lost my Zen:Vision data exchange USB cable a few months ago, i have since bought 2 more from amazon which only work for charging uses. Their description stated they could be used to exchange data, but they don't seem to work with my PC. Does anyone
-
Edit Business Rules a Run Time
Hi Friends, We can edit business rules at run time using SOA Composer if they belong to a SOA composite. Is it possible to edit business rules in non-SOA application at run time using SOA Composer or otherwise? Thanks, Sachin.
-
Why does this error message appear when opening Ffox?
ent returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED) [nsIFileInputStream.init]" nsresult: "0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)" location: "JS frame :: chrome://xdmdownloadmgr/content/overlay.js :: anonymous :: line 110" data: no]