Hello- I have final cut pro X and final cut studio. Should Compressor 3.5.3 work with fcpX. Whne I try to export to it aI am told I must go to i-apps and buy compressor.
Hello- I have final cut pro X and final cut studio. Should Compressor 3.5.3 work with fcpX. When I try to export to it aI am told I must go to i-apps and buy compressor.
No, FCP X will only work with Compressor 4.
Similar Messages
-
Hello, I have a Macbook Pro 2011, and put an SSD on it. Yesterday i upgrade to Yosemite and sadly mi trim is not supported .... I really need (and demand) a solution to this, because like i see in the manual of the mac, Iam allowed to install a disk.
Try a Safe Boot to clear the dyld_shared_cache (dynamic loader cache)
SafeBoot http://support.apple.com/kb/HT1564
Safe Boot, which automatically rebuilds this cache (among other things). -
Hello, I have Acrobat XI Pro for which I pay by monthly subscription. Each month, for the past three months or so, at renewal time, I receive a note stating that my trial period has expired and I cannot open my Acrobat Files. I have telephoned three or four times each time this happens and have been told that the matter has been resolved - it has not! At one time I had paid inadvertently for three account for Acrobat XI Pro running at the same time - I only need 1. I'm afraid that I may have just opened a second account by mistake in order to open my files. I repeat, I only require one account. Would you please advise and assure me that this matter has finally been resolved and that I will no longer receive these notifications each month..
I don't work for Adobe but it seems to me you might be signing in to Acrobat with the wrong Adobe ID.
Check the Adobe ID you use in Acrobat.
Check this Adobe ID on Adobe's to make sure that it has an active subscription. -
Hello, I have a MacBook pro retina 13" early 2013, 2,6 GHz Intel Core i5 and Intel HD Graphics 4000 1024MB,
and i am not sure if I can use a 4k2k display Monitor with my Macbook, please help!Hello, Righten.
Thank you for visiting Apple Support Communities.
I understand that you want to know if your MacBook Pro will support a 4k display. Here is an article that will answer your question.
Using 4K displays and Ultra HD TVs with your Mac
Cheers,
Jason H. -
Hello,
I have a Macbook Pro 17'', 2.4 GHz Intel Core i7 (late 2011). I dont know what happened but the screen shows red flickering pixels everywhere where it should be black, and light blue pixels where it should be gray, I had this problem twice, the first time it just disappeared by itself. Now it's been like this for days, I have really no clue.
Anyone with the same problem or solution?
This is how it looks like:
ThanxIs that a camera picture or a screen-shot? Is there any difference? i.e., can you capture the problems in a screen shot, or not?
-
hello,i have a macbook pro and i just recently downloaded facetime, and now i cant use it, it says An internal FaceTime error occurred,i dont know how to fix it, please help.
If your webcam is powered by USB, make sure it is attached directly to your Mac and not a USB hub. In my case, I had my Rocketfish webcam attached to a peripheral USB hub and it wasn't drawing enough power to operate at capacity. Therefore, Facetime was quitting on me and giving me that exact error message. Once I attached the webcam directly to my Mac USB port, problem solved. Hope that helps.
-
I have recently update my Final Cut Pro X to Final Cut Pro X 10.1. I downloaded the update from the app store. Now every time I open Final Cut it crashes almost instantly. What can I do?- I really need help!
It sounds as though you have a corrupt project - or possibly a file within an event that is causing the application to crash.
Quit FCP X, then move your projects and events (if you have any) to new folders so that FCP X doesn't find them, then relaunch the application. If it launches OK, there's a very good chance one of your projects or events is causing the problem.
Quit the app again, then move one event or project at a time back to the original folder and launch FCP X again - keep going until you find the cause.
Andy -
Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes. I have downloaded new Extension Manager for CS5. and still crashes. Anybody else experience this? email:[email protected]
Hi bigd_bud,
Can you see if the solutions in this post help?
Re: Adobe Extension Manager crashes on mac 10.8
Thanks,
Preran -
hello,
I have a problem, my computer is interrupted very often CAN I changed Maveric when working and 15 times a day is very disturbing and nustiu what I do is not only blocking and restartsIf you are getting Kernel Panics, this article (available in many languages) will explain how to find the reports. You can post the latest one here for Readers to help you:
How to Log a Kernel Panic -
how do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.
Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled. -
have a macbook pro the fan wont stop running the keyboard light is not working and the it wont charge all happened all of a sudden what to do please.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, you may have to take the MBP to the Apple Store to have it checked.
Best -
Hello, I have a Macbook pro which runs under 10.5.8. I want to use a PC interface. I've been told I need to purchase paralell Destop 6, Windows licence and Microsoft Office 2008 for PC. Is that correct ?
If you have a MacBook Pro with 10.5, that's usually a machine that's getting long in the tooth and thus running Windows as a virtual machine (one OS inside another) will likely be slow.
Also spending all that money for Windows (VirtualBox is free) and Office seems like almost a waste of effort if the machine is going to die suddenly.
MacBook Pro's last about 4-5 years.
To do what you want your going to have to upgrade OS X to 10.6, then either buy VMFusion or Parallels which they are now catering to 10.7 and 10.8 users, so it's slow on 10.6, or use the free VirtualBox which will run well on 10.6. Then buy a copy of Windows 7 as earlier Windows versions are not being sold, then Office 11 or whatever.
You can also install OfficeMac into 10.6, if they still sell a copy.
You see your outdated really, and anything that can work is soon to be ignored etc.
What I would consider doing instead, since your not a OS upgrade type of person (we are on 10.8 now which won't run on your machine or be extremely slow) is to buy yourself a decent Windows 7 laptop and install Office into that. Some have the demo already inside and all you have to do is activate it.
This way you get your Windows experience and Office experience, don't have to fiddle with complicated virtual machine software, or Apple's problematic Bootcamp etc as Apple really is leaving 10.5 and 10.6 users behind, and by next summer will be leaving 10.7 users behind too.
Windows 7 laptop will be the cheapest and least stressful option for you, you can continue to use the Mac until it drops dead of course.
I say this because your on 10.5, your like most computer users, just a computer user and not a geek.
You obviously have some reason you need Office, likely for a job or school and since 99% use Windows and Office, then that's what you should be using.
If your only needing Office or Office like program for something temporary, then I suggest you install the free LibreOffice into OS X, however I don't know if it will run in 10.5, you might have to upgrade to 10.6 via the 10.6.3 white retail disk, however Apple doesn't sell it anymore, but perhaps Amazon or elsewhere does.
Sorry, you have been out of the upgrade loop for quite some time, so a new machine is in order as that one is about to die soon, so I wouldn't be spending too much on it really.
If you have a fat wallet you can buy a new Mac with 10.8, and have Windows 7 installed in BootCamp (direct boot) and also into VMFusion or Parallels (copies the Bootcamp Windows so you can use both) and Office for you. It will come all set up, enter your password and use the machine.
I think OtherWorld Computing will sell you a pre-configured Mac all set up like that for you, Apple won't do it though.
You can also pay a local PC/Mac specialist to do the same.
Don't forget setting up a backup system for both Windows and OS X, add anti-malware software in Windows, you'll need that.
IMO a new Windows 7 laptop would be the cheaper, less stressful option, Learning Bootcamp and virtual machine software can be a pain if your not computer savvy, al;so Apple has a nasty habit of upgrading the operating system constantly, now on a annual basis. You don't upgrade and all your third party software, then your denied security updates in short order. Windows 7 laptop will last a decade on the same version, only needing simple updates, not upgrades.
If you want your Windows machine to last even longer, like a decade, then get a desktop tower instead of a laptop.
Mac's are for those who can handle a lot of change, as Apple is about always inflicting change. It's costly change too.
Good Luck
Windows in BootCamp or Virtual Machine?
Things to consider before upgrading OS X -
Can you upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with upgrade?
Does anyone know if you can upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with $699 upgrade?
I purchased Final Cut Pro 2 years back and then purchased the Final Cut Pro 3 upgrade. I have not used it in years, but now I want to upgrade to Final Cut Studio 2. Is this possible by just purchasing the upgrade?Apple's web page has the requirements:
http://store.apple.com/AppleStore/WebObjects/BizCustom?qprm=78313&productLearnMo re=MA886Z/A
The $699.00 upgrade version requires a valid serial number from a commercial version of Final Cut Studio, Production Suite, or Final Cut Pro 1, 2, 3, 4, or 5. Academic and not-for-resale versions are not eligible for this upgrade. -
Hello, I have a macbook pro 15 ", it has 4GB of memory, when I try to run a videoin full hd hd in the system it gets slow. Is this normal?
Glauco Neves wrote:
Where can I find this new version? Thank you
10.7.4 is the latest update of MacOS X Lion. Run Software Update in System Preferences.
Since you state to run 10.7.2, Software Update will have to use the combo updater to bring it up to 10.7.4. This will entail a large download that will take some time so have patience. I suggest the following steps:
Restart the Mac, press and hold Command-R to start up in Recovery Mode (More info: http://www.apple.com/macosx/recovery/ ).
If needed, select the desired language to move to the next screen (only if it is the first time in Recovery Mode).
Select Disk Utility in the bottom of the list, Continue...
Choose the hard disk drive device on the list ( xxx.xx GB APPLE HDD ...) by clicking on it.
Click on Repair Disk button, wait for it to finish.
Choose the Lion boot volume, Macintosh HD, by clicking on it.
Click the Repair Disk button, wait for it to finish. If any errors are found and the process does not end with a "The volume Macintosh HD appears to be OK." message, click on Repair Disk again.
Click on the Repair Disk Permissions button. This will take awhile to finish.
Quit Disk Utilities, choose Restart from the menu.
Now run Software Update in System Preferences, choose to apply all missing updates. This will take quite awhile, depending on how fast your Internet connection is. The Mac will need to be restarted when the updating is done.
Run Software Update again to have Safari updated to the latest version. This is necessary since Safari 5.1.7 needs OS X 10.7.4 to be running already. -
Importing final cut pro 7 to final cut X using XML
OK so I just read Apple's new FAQ and it says support for XML is forthcoming. Couldn't someone enterprising individual just write an app which transforms FCXML from FCP 7 to FCP X XML. There could be some data loss, but better than nothing..
the black sun wrote:
But they have said they will not be supporting import of FCP 7 projects. Sad but true.
Factually incorrect. Sad but true.
Tell me what is factually incorrect? There is absolutely no mention or commitment to providing any sort of tool to bring in final cut pro 7 projects in any shape or form. They could have said "a limited import tool is being worked on, but will only support a limited feature set, and data loss/changes to your project may occur." But they didn't. Here's the exact quote from Apple's FAQ (emphasis added):
Can I import projects from Final Cut Pro 7 into Final Cut Pro X?
Final Cut Pro X includes an all-new project architecture structured around a trackless timeline and connected clips. In addition, Final Cut Pro X features new and redesigned audio effects, video effects, and color grading tools. Because of these changes, there is no way to “translate” or bring in old projects without changing or losing data. But if you’re already working with Final Cut Pro 7, you can continue to do so after installing Final Cut Pro X, and Final Cut Pro 7 will work with Mac OS X Lion. You can also import your media files from previous versions into Final Cut Pro X.
Maybe you are looking for
-
How to recover my security question
I forgot the answer tk my security question. :(
-
After having payed fo an account for one year for Photoshop CC and Lightroom 5 i keep getting the message ,that I am using a trial version of Photoshop CC. Lightroom on the other hand is not functioning in a trial version ! Could anyone tell me how I
-
Form text automatically centers in block; how to change?
I've created an invoice form in InDesign for a client. I am trying to make this into a pdf form so that the client can just fill in the middle of the page. I've created a text field, but when I test this the type appears in the middle of the block in
-
When trying to download free apps it says there is a minimum age resriction and disallows
-
As I scroll down in library images disappear
Really wierd. Scrolling down in library or Past !2 months folder I reach a point where the images briefly appear, then disappear. Reducing the image size to minimum, I see the most recent of 250 or so photos, but the rest are just squares and rectang