Hello. I have some questions. I use Adobe CC and when it comes to photoshop, it's so slow and often
Hello. I have some questions. I use Adobe CC and when it comes to photoshop, it's so slow and often cannot open files(or create a new one)..what am I supposed to do?! Really don't know what to do..I'll wait for your reply
Amazon allows for at least so far when I have an issue like mentioned above a re-download.
Yes it does. So does the iTunes Store:
Download past purchases from iTunes in the Cloud - Apple Support
Similar Messages
-
I have a question about using adobe CS files in CS6 edition
I am a graphic artist . I have a question about using adobe CS files in CS6 edition. when I am gonna open thse adobe CS created files in CS6 Edition i get a color variation than i made with the CS version.Please give me an idea about this issue as soon as possible.If you need i can upload my problem as a screenshot to clearity
donrulz,
Are your Edit>Color Settings the same?
Are you using spot colours, such as Pantone (there have been some changes in CMYK values with new colour books)? -
I have some question on "Use LabVIEW to Control two DSP and RTDX"
I have some question when writing LabVIEW. I have DSP6711 and DSP6416, I use RTDX to send data to LabVIEW.
I write three programes for LabVIEW, one is RTDX for DSP6711, another is RTDX for DSP6416, and the final is RTDX for two DSPs.
The program of LabVIEW is workable when doing DSP6711 or doing DSP6416. But there is some problem when running DSP6711 and DSP6416 on LabVIEW at the same time.
How to tell the LabVIEW's tool of " RTDX read" to get the datas from different DSPWhat you want to do should be fairly straightward and a good way to learn labview.
First off, if you haven't already, I would download the drivers for the Keithley and Agilent instruments. I found the keithley drivers at the link below. You will need to find the labview drivers for the Agilent PS at their website. Drivers are the VI's you will use in your program to control the insturments.
http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E90B0659CE034080020E74861
If you open Labview and go to the help menu and click on Labview bookshelf there is alot of information on getting you started coding labview. This should get you started, if you have anymore questions just ask in this same thread and I am sure you will get all the help you need.
Brian
Message Edited by BrianPack on 09-14-2005 05:21 PM
Message Edited by BrianPack on 09-14-2005 05:21 PM -
pls help me update my ipad its not working fine.
In this case if you download it from his account, you will need to deleted and download it again by your account
also delete your backup from iTunes after you delete all the apps/games that you download it from your friend account
so in the next time you try to restore your backup, you will not face the same problem -
Hello, I have two questions on time capsule I can only have it on my external hd files and free up my internal memory to my mac I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers
I have a mackbook pro and an iMac if I buy a time capsule 2tb airport, I can use it with time machine and what would be the best way to use it.
There is no particular setup required for TM.. both computers will create their own backup sparsebundle which is like a virtual disk.. Pondini explains the whole thing if you read the reference I gave you.
and how to use time capsule airport whit other external hd to use my old lacie airport with the new time capsule
Up to you.. you can plug the external drive into the TC and enjoy really slow file transfers or you can plug it into your computer and use it as external drive.. which is faster than the TC.. and TM can include it in the backup.
Again everything is explained in the reference.. you are not reading it. -
Does anyone use a LaCie external hard drive with their Mac using imovie '09? I have some questions.
Does anyone use a LaCie external hard drive with their Mac using imovie '09? I have some questions.
Are you actually having a problem with the new Lacie drive, or are you just asking is the Lacie drive somehow different from your old G-Drive?
From a connection standpoint, most Lacie desktop drives have both USB and FireWire connections, just like the G-Drives do. You would connect and use it the same as a G-Drive.
Regarding capturing to the external HD, if you are using a camcorder that has FireWire (iLink) connection, it is not advisable to have an external FireWire HD connected to your Mac at the same time as your camcorder; there are often communication conflicts between the camcorder and the hard drive if they are connected at the same time. The conflicts usually appear as either dropped frames or a complete freeze. This is more common with Canon miniDV camcorders but I have also seen this behavior with Sony miniDV camcorders. (The problem is the camcorder's FW implementation, not the hard drive.) The workaround is to capture to your Mac's internal HD and later copy the captured video to your external HD. -
I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?
More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
Plus, EXACTLY what are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download -
Hello everyone I have a question I use my Apple ID for iMessage but I want to know if I can use my friends Apple ID just for the App Store, can I do that ????
First on a computer try editing your ID to change the payment method to None.
How do I change my Apple ID Name or personal information?
You can change your Apple ID Name at My Apple ID. Click on Manage your Apple ID and sign in with your Apple ID name and password. Click Edit and enter the new information, then click Save Changes. Changes take effect immediately. You can also use My Apple ID to change your personal information, such as your mailing address or email address. See Changing the name you use for your Apple ID if you'd like more information.
If problems see:
Why can’t I select None when I edit my payment information?
Last:
Create a NEW account using these instructions. You have to use an email address not used with Apple before.
Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card -
Hello, i have a problem with the adobe photoshop elements 10 in the organizer impossible to use the
Hello, i have a problem with the adobe photoshop elements 10 in the organizer impossible to use the magic mouse, Where can I configure this one?
Thank you.What do you mean by "impossible to use"? I use a magic mouse with PSE all the time. What are you wanting to do that isn't working?
-
Hello I have the Latest version of Adobe Lightroom 5 to date (8/26/14) however just recently when I open the develop tab I'm missing two options on the right side column "Lens correction" and "Effects" I do not know I've hit some setting to remove those options or if this latest version deleted those options? Any help would be greatly appreciated and please excuse my ignorance :/
Right click next to one of the other headers and you will get a pop-up to enable the missing ones.
-
hello, I have a question for you. receipt of some Internet providers or notices notifications on the lock screen and I consume the battery on my iPhone 4S. would you please tell me how do I block these ads in blue letters on the screen me? thanks
Hi demir67,
Welcome to the Support Communities!
The articles below will show you how to block text messages from your iPhone:
iPhone User Guide for iOS 7:
Send and receive messages - iPhone
http://help.apple.com/iphone/7/#/iph01ac18d71
Block unwanted messages. On a contact card, tap Block this Caller. You can see someone’s contact card while viewing a message by tapping Contact, then tap the "i" with the cirle. You can also block callers in Settings > Phone > Blocked. You will not receive voice calls, FaceTime calls, or text messages from blocked callers.
iOS 7: Understanding call and message blocking
http://support.apple.com/kb/HT5845
Notification Center - iPhone
http://help.apple.com/iphone/7/#/iph6534c01bc
Set notification options. Go to Settings > Notification Center. Tap an app to set its notification options. You can also tap Edit to arrange the order of app notifications.
Cheers,
Judy -
I have some questions regarding setting up a software RAID 0 on a Mac Pro
I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html -
Hi !
Sir I have some questions regarding word report generation using(C language in labwindows) Please.
1.How can i add border to a word page?.
2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
3.How can i fill a cell of word report table withe the data type other than "character"?.
And sir one question about use of timer in cvi labwindows please.
Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
Regards
Imran
Pakistan
Solved!
Go to Solution.Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx 65 KB -
I'm going to install Arch this weekend but I have some questions
Currently I use Linux Mint on my primary PC, but I've installed Arch on my older PC at my parents house. I like it a lot and I think I want a distro that is rolling release and also that I build myself (as opposed to installing all of the bloat on Mint). However, I do have some questions; Linux is pretty new to me (been using it since about November) so I don't know exactly how everything works.
1) How do I know what packages I have to have installed for building C/C++ programs? I know in Ubuntu install gcc/g++ by itself doesn't get the job done, you need build-essential to get all of the libraries. Also, what packages do I need for OpenGL and SDL? I'm a CS major and I'm in an OpenGL class so I need to be able to compile OpenGL programs; SDL is for my own purposes, but I'd still like to have it.
2) I use Amarok to transfer songs to my iPod. Amarok 1.48 and libgpod 0.6.0 are in the repos and I know both of those are compatible with my 6th gen. However, I do have a question about transferring album art. On Mint, Amarok transfers the album art as I transfer the album, but someone told me that Amarok doesn't do that by default; there must have been a setting changed somewhere to do that. I looked through Amarok's options and didn't see anything like that... anyone know if I can do that in Arch, and how? There's no real information about Amarok in the wiki.
3) I'm going to use Gnome environment but some KDE apps (like Amarok). Will there be any problems with that that I should know about in advance?
I'll probably have some more questions once I actually install Arch, but that will do for now Those are the important ones.1) You know by seeing its dependencies on pacman or by the developer documentation. Unlike other distros, you don't need to install dev packages. Example: You have gcc and all the basic gnu tools installed, and you want to compile a program that is not in a arch linux package yet (if theres a package, you can build it using abs / makepkg and pacman will handle the dependencies) and requires, for example, a library called "xyz", you only need to download "xyz" from pacman, and all the dev stuff will come together (like header and etc).
I hope it helps. -
Hello, I have a question regarding the sharing on iMovie. I have just recently purchased an Elgato Gaming Capture HD and I then finished my recording with that and put it into imovie. I worked long and hard on the project and when I go click the share feature on iMovie all the noral options pop up and when I actually click where I want to share it to nothing at all happens. If you know what is wrong/ what I am doing wrong please let me know.
Thank you.
PS: I am using iMovie 10.0.6./*line 957 error */
public void select()
for (count = 0; count <= p; count ++ )
if(P[count] != null){ /* validation */
m = (int)(P[count].getX());
n = (int)(P[count].getY());
if (Math.pow(-1, m + n) == 1)
piece[m][n].setBackground(wselect);
else
piece[m][n].setBackground(bselect);
step = 2;
}
Maybe you are looking for
-
My notes from my iphone4 have been deleted. Heres the problem, the reason it is deleted is because i accidentally deleted my gmail messages. i guess my notes were there to. the notes are not in icloud and not in gmai. is there any way i can get them
-
HOW CAN I DO A RESET TO THE IPAD2 ?, HOW CAN I DO A RESET TO THE IPAD2 ?
I was deleting mails from my mail box when the sistem down. Since there i try to shutdown the ipad but the screen apears black with a thinking icone in the middle and doesn´t swich off. What can i do? Someone a similar problem? Thanks
-
How could i know the carrier of my iphone? My iphone 5s model is ME323LL/A
My iPhone's locked and I don't know what its carrier is, please help. Thank you
-
Pass User Parameters between Forms and Reports...?
Hi, I have been trying to pass user parameters from forms to reports using RUN_REPORT_OBJECT. I am able to run the report from the form, but still don't know how to pass user_parameters. Does anyone know how to do this? Thanks, AB
-
Concurrent Transactions,Disaster Recovery
Hello friends, I have an application on sql server which is used for online reservation.Could you tell me roadmap in order to handle concurrent transaction and disaster recovery plan? I am using sql server 2008 R2. Thanks in advance.