Hello, I have the new iPhone 5. When sending iMessages to other iPhones sometimes it will send as an iMessage and other times iMessage does not work so I have to send it as a text message. Can anyone help me?
Does it matter if i am on WiFi or 3G?
There is an earlier thread that was answered by an Apple employee that states they are seeing the iMessage and Facetime servers are down. It is unknown when they will return, however it generally is not an extended period of time.
Similar Messages
-
Blackberry agenda does not synchronize, even thought hey mentioned that he did??..can anyone help:))
blackberry agenda does not synchronize, even thought hey mentioned that he did??..can anyone help)
Hello Zeni,
Ensuring your daughter is able to communicate while she's mobile is extremely important. I'm terribly sorry for the mobile number change disabling her sim card.
One good suggestion here from the community was to remove the sim card and reinsert it. I do want to elaborate on that a bit. You should have the phone completely powered off and I would recommend the sim to be out for at least 30 seconds.
Put the sim back in and power the phone back on. Hopefully that will kick it into gear on the database side. If not the new sim will work.
I can't apologize more for this and I hope all is well now.
If you have any questions please feel free to ask!
Thanks,
MelissaM_VZW
Follow us on Twitter @vzwsupport -
After the OS 6 update my speaker does not work. Volume control on the side does not adjust the volume either. My music plays but no sound comes out. Can someone help me with this issue? I've tried rebooting my phone but still no sound comes out. I currently have the 4S.
try to activate and desactivate the airplne switch a couple of time
-
I ordered a album via icloud and sent it to a friend. We both use iPads. She has not received or does not know how to download the album. Can anyone help please?
Your friend should have received an email announcing the gift that you sent to her.
http://www.ilounge.com/index.php/articles/comments/redeeming-itunes-gifts-on-ios
Perhaps she did not receive the gift. You can resend it if you like.
Resend iTunes Gifts -
Hi there,
Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
Dear Apple,
I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
Please see attached file of the error message coming up in the print queue.
I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
Regards
Brian
PS i obviously can't attach the error message so here it is: Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
Thank You all in advance
Regards
BrianIt is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398 -
this does not happen on any other site i visit only on yahoo mail.yahoo,s answer to the same question is we dont know reason maybe its firefox.
I have had that happen with Comcast web mail, too. You can't hold the Ctrl key and then use the scroll wheel to do certain functions in the web mail software. That function will work in the web mail software, but you will also change the Zoom factor of the page. You have to remember to '''''reset''''' the Zoom factor immediately, Firefox will remember the Zoom factor and use that until you reset it to default.
-
So as the title says, I need help with this. I've been trying to find a solution for hours.
Just place it in recovery mode again and continue. After some time the iPod will go out of recovery mode. It can also take a longtime to download the firmware needed for the restore.
-
Issues send email from my macbook Pro, it is a web based email, and I can send it by logging into the webmail site. The odd part is that sometimes it just works and most times it does not. I go through and make some random changes and and then go back and change it back and it wold work for that email, and then a few minutes later I try to send another and does not work, try doing the same and this time it does not work, getting a little frustrated, what else can I do, except chage back to a windows based laptop?
If you're having trouble sending, but not receiving, mail, it's likely due to your outgoing (SMPT) server settings.
Which webmail service are you using? Some provide some good guidelines on setting up your account, some not so good.
Clinton -
I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?
Sometimes deleting the account and then re-creating it can solve this issue
Write down all the information in accounts before doing this
Highlight the account on the left and click the minus button
Then click the plus button to add the new account and follow the prompts -
iPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but after downloading the software, it brings error in downloading s/w message.can anyone help please.Thanks
http://support.apple.com/kb/TS3694#error14
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
i am using iphone 4s ios6.1.2 ...my iphone has become too slow once i have updated from ios 5.1.1..can anyone help me to make my iphone perform batter
Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Remove all apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete apps from this list.
- Press the home button twice when done.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue. -
I just got the iPhone 5. It's completely synced and working. All my contacts are loaded. However, caller ID is not working when I receive a call or a text. Can anyone help me out with this?
Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs. See if it is a fault in the hardware or just an iOS reinstall is the answer.
One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings. Then restore from the backup you just made. That has helped some with WiFi problems, may be it would work with your problems.
But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do. -
Hi, I had to renew my iPhone 4s and backed up all my data to iCloud and since starting it up and transferring my information over I cant send or receive messages, can anyone help please
Hi there,
Do you have icloud account? You need firstly turn off find my iphone (by go to icloud.com -->sign in --> go to "Find my iphone" and erase your iphone in it). And then you restore your iphone with DFU mode.
When you erase your Find my iphone and if you can not restore, your iphone has a problem with hardware.
Some infos can help you.
Kind regards, -
As i was installing Final Cut Studio i cancelled it while entering the details, to go to bed. I tried to reopen the installer window and it just comes up with a Terminal Text Window, can anyone help?
It may have half installed the software so dose anyone know if i can reinstall or delete what it has installed?after using FCS remover run disc repair:
shut down the Mac
Hold the Shift key on keyboard and start up the Mac
The Mac will run the repair tasks it takes 10- 30 minutes, then it will boot up normally
insert the FCS DVD in the drive and install FCS again. -
HT4623 I have no software update button in my settings, can anyone help ?
I have no software update button in my settings, can anyone help ?
That only appears when you have iOS 5+ installed, if your iPad is on iOS 4 then you will need to do the update via your compuer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (you may also want to copy photos off the iPad as well) and then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'. You may also want to copy off the iPad any important documents, notes, files etc e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case.
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972 -
I have the iphone 5 and my lock button does not work. Can apple fix it or give me a new one. Can they still give me a new one even if I didn't buy my iphone 5 from them I bought it from verizon
Alread asked and answered in your previous post - please do not post the same thing multiple times in multiple forums.
https://discussions.apple.com/thread/5164919
Maybe you are looking for
-
My PC's OS is 'MS Windows Vista Home Premium'. As my initil question states: When downloading, after the download completes, I can not see, run, nor access the file in it's designated folder. The download only appears in the "Downloads" window and th
-
I cannot upload pictures to Facebook in 'Messages' using Firefox, but every other browser will.
I used to be able to, and have only been able to one time since. It started this in about vers. 6 I believe, and has been going on for a few weeks. I've deleted and redownloaded Firefox twice, with the error still occurring. Thanks, Mark
-
Blackberry torch 9810 wont start after blackberry protect updated
got alert for blackberry protect update and installed up and went to reboot now . now my blackberry torch 9810 acts like it is restarting and will not come back on. need help asap!!! Solved! Go to Solution.
-
What is the T-Code for creating Cost center - profit center standard hierar
Hi, What is the T-Code for creating Cost center - profit center standard hierarchy.Please provide me the T-codes. Thanks
-
I am trying to update my ipad, so I went into settings, general and looked for soft ware update and it is not there. So where should I go to update my ipad?