Hello i installed windows 7 on my mac and after installing it i gan't go back to mac os x

Did you use Boot Camp Assistant?
You should be able to hold down the option key whilst booting in order to select which OS you want to boot into.
Clinton

Similar Messages

I installed Windows 8 Consumer Preview and after that I cannot run OS Lion. How can I recover options to boot back in OS Lion?

I tried to reboot from CD or USB and the Mac Mini simply bypasses it to Windows 8 Consumer Preview.
How can I avoid to Windows 8 boot and have the options to select OS Lion?
I used Boot Camp as shown in many videos. I did not select any additional OSX drivers for install.
Thanks,
Marcio

I am stuck in Windows 8. I cannot boot back to LION. HELP!!! I am in Microsoft World again and no option to get back.
how can I install boot camp 4 in Windows 8 so I can reconfigure my computer back?

Installing Mavericks cause Kernel Panic and after installing too

Hi,
I worked with Mountain Lion and all was good, but I thought that would be nice to update to Mavericks.
And I'm not good in Mac OS, so I didn't prepare backup before, because believed that it have to work.
But during installation I got kernel panic several times, yeah. But installation process was continued and finally Mavericks was installed.
I was happy, but I shouldn't.
From time to time I'm getting kernel panic and I don't know what is reason.
The worst things that I can't rollback to ML, because for some reason Mavericks installing instead.
And I did clean install several times, and did cleaning NVRAM and PRAM, but it all didn't help to me.
I haven't Apple Support in my country, so I can't even come to service center.
And my last hope is your support.
Could you please look on a kernel panic log and say me what is wrong with it?
Anonymous UUID:
CB0D1011-3613-05A6-5015-9ABF6A5C5764
Sun Dec 8 22:57:24 2013
panic(cpu 1 caller 0xffffff80074dc19e): Kernel trap at 0xffffff7f8934696c, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef7f8936c9b8, CR3: 0x000000000a169000, CR4: 0x0000000000000660
RAX: 0x0fffffc5f76d0000, RBX: 0xffffef7f8936c9b0, RCX: 0x0000000000000001, RDX: 0x000003a0892cfa12
RSP: 0xffffff80efc03d80, RBP: 0xffffff80efc03e70, RSI: 0x000003c0892c668c, RDI: 0xffffff80e8eed148
R8: 0x00000000e0000000, R9: 0x0000000000000005, R10: 0x00000000ffffffff, R11: 0xffffffffffffffff
R12: 0xffffff801937f800, R13: 0x0000000000000005, R14: 0xffffff80e8eed148, R15: 0xffffff7f8936ae20
RFL: 0x0000000000010006, RIP: 0xffffff7f8934696c, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef7f8936c9b8, Error code: 0x0000000000000002, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80efc03a10 : 0xffffff8007422f69
0xffffff80efc03a90 : 0xffffff80074dc19e
0xffffff80efc03c60 : 0xffffff80074f3606
0xffffff80efc03c80 : 0xffffff7f8934696c
0xffffff80efc03e70 : 0xffffff7f89345b89
0xffffff80efc03f30 : 0xffffff80074dda5c
0xffffff80efc03f50 : 0xffffff800743757a
0xffffff80efc03f90 : 0xffffff80074378c8
0xffffff80efc03fb0 : 0xffffff80074d6aa7
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelCPUPowerManagement(216.0)[A6EE4D7B-228E-3A3C-95BA-10E D6F331236]@0xffffff7f89343000->0xffffff7f8936dfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:
0x0000000007200000
Kernel text base: 0xffffff8007400000
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 6087597184120
last loaded kext at 734223625091: com.apple.filesystems.smbfs
2.0.0 (addr 0xffffff7f89736000, size 335872)
last unloaded kext at 317416816502: com.apple.filesystems.msdosfs
1.9 (addr 0xffffff7f89736000, size 57344)
loaded kexts:
com.apple.filesystems.smbfs
2.0.0
com.apple.filesystems.autofs
3.0
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.iokit.IOBluetoothSerialManager
4.2.0f6
com.apple.driver.AudioAUUC
1.60
com.apple.driver.AGPM
100.14.11
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.driver.AppleHDA
2.5.2fc2
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.driver.AppleMikeyDriver
2.5.2fc2
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleHWAccess
1
com.apple.driver.ACPI_SMC_PlatformPlugin
1.0.0
com.apple.driver.AppleLPC
1.7.0
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.GeForceTesla
8.1.8
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.0f6
com.apple.driver.AppleBacklight
170.3.5
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.driver.SMCMotionSensor
3.0.4d1
com.apple.driver.AppleUSBTCButtons
240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.driver.AppleUSBTCKeyboard
240.2
com.apple.driver.AppleIRController
325.7
com.apple.driver.AppleUSBCardReader
3.3.5
com.apple.iokit.SCSITaskUserClient
3.6.0
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.4.0
com.apple.driver.AirPort.Brcm4331
700.20.22
com.apple.driver.AppleFWOHCI
4.9.9
com.apple.driver.AppleUSBHub
650.4.4
com.apple.driver.AppleAHCIPort
2.9.5
com.apple.nvenet
2.0.21
com.apple.driver.AppleUSBOHCI
650.4.1
com.apple.driver.AppleUSBEHCI
650.4.1
com.apple.driver.AppleSmartBatteryManager
161.0.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleSMBIOS
2.0
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.driver.AppleIntelCPUPowerManagementClient
216.0.0
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.driver.AppleIntelCPUPowerManagement
216.0.0
com.apple.kext.triggers
1.0
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.AppleGraphicsDeviceControl
3.4.12
com.apple.driver.DspFuncLib
2.5.2fc2
com.apple.vecLib.kext
1.0.0
com.apple.iokit.IOAudioFamily
1.9.4fc11
com.apple.kext.OSvKernDSPLib
1.14
com.apple.iokit.IOSurface
91
com.apple.iokit.IOBluetoothFamily
4.2.0f6
com.apple.driver.IOPlatformPluginLegacy
1.0.0
com.apple.driver.AppleSMBusPCI
1.0.12d1
com.apple.driver.IOPlatformPluginFamily
5.5.1d27
com.apple.nvidia.classic.NVDANV50HalTesla
8.1.8
com.apple.nvidia.classic.NVDAResmanTesla
8.1.8
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.0f6
com.apple.iokit.IOFireWireIP
2.2.5
com.apple.driver.AppleHDAController
2.5.2fc2
com.apple.iokit.IOHDAFamily
2.5.2fc2
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.iokit.IONDRVSupport
2.3.6
com.apple.iokit.IOGraphicsFamily
2.3.6
com.apple.driver.AppleSMC
3.1.6d1
com.apple.driver.AppleUSBMultitouch
240.6
com.apple.iokit.IOUSBHIDDriver
650.4.4
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.0
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.driver.AppleUSBComposite
650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice
3.6.0
com.apple.iokit.IOBDStorageFamily
1.7
com.apple.iokit.IODVDStorageFamily
1.7.1
com.apple.iokit.IOCDStorageFamily
1.7.1
com.apple.iokit.IOAHCISerialATAPI
2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.0
com.apple.iokit.IO80211Family
600.34
com.apple.iokit.IOFireWireFamily
4.5.5
com.apple.iokit.IOUSBUserClient
650.4.4
com.apple.iokit.IOAHCIFamily
2.6.0
com.apple.iokit.IONetworkingFamily
3.2
com.apple.iokit.IOUSBFamily
650.4.4
com.apple.driver.NVSMU
2.2.9
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.10
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOReportFamily
21
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.8
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.corecrypto
1.0
com.apple.kec.pthread
1
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500420AS, 500,11 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:

Oksan wrote:
Sun Dec 8 22:57:24 2013
panic(cpu 1 caller 0xffffff80074dc19e): Kernel trap at 0xffffff7f8934696c, type 14=page fault, registers:
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, SMC 1.47f2
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
1333 MHz is the wrong memory.
Your Mid 2009 MacBook Pro 5,5 uses PC3-8500 1066 MHz Memory....?
see > MacBook Pro (13-inch, Mid 2009) - Technical Specifications
and > MacBook Pro: How to remove or install memory
or > How to Upgrade MacBook Pro RAM (2009, 2010, 2011, 2012)

HT4407 Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?

Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?
My first thoughts were that 'bootcamp' was out of date...needed an upgrade to register windows 7. Since then I am once again met with the same problem... how can it not see the I have already have a paritioned drived ready to be used for installition, is there a way to fix this problem? I don't really want to pay out for 'i-parition' only to merge my 2 drives back into one and start again from scratch =/. Seems silly to do so...what are my options?
Regards Swishi...p.s If anyone can help me...it'll make my day :3.

ONE PARTITION.
You don't need to buy anything but you should have backups.
you can delete #2 you created. Then resize to full drive.
There are already
GPT
EFI
Mac
Recovery
and there needs to be Windows which cannot be higher ID
Reading the instructions first and just swallow whatever pride or inidignation. It is a "my way or highwar" setup and utility,.
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/

Hello i have a problem with my MacBook Air they wiped out the operating system then installed windows 7 how do i re install the apple firmware

Hello i have a problem with my MacBook Air they wiped out the operating system then installed windows 7 how do i re install the apple firmware please help

That is incorrect. You can install Windows on a Mac, any Mac, without having OS X installed on it.
To the OP you will need the original system reinstall USB thumb drive that came with your Mac Air if it is older than a Mid 2011 model or if it is newer than a Mid 2011 model you use the Online Internet recovery system.
If you don't have that original reinstall USB thumb drive you can order one from Apple for a small charge. Call Apple and ask to speak to someone Specifically to order a Replacement USB system reinstall thumb drive for your model year. You will need the serial number of that Air. It is etched into the bottom of the case.
Eric Ross wrote:
You can't run Windows on your Macbook Air without having Mac OS X installed with Boot Camp. So it should be an option to select the Mac OS X partition at startup when holding down the option key. Take a look at this link, http://support.apple.com/kb/HT4818

Cant start mac applications after installing windows 7 on my macbook pro

cant start mac applications after installing windows 7 on my macbook pro

When booting your computer press and hold the option key. When the boot manager appears select OSX. When OSx boots select and run your "mac application".

How to uninstall iTunes in mac and then install again

how to uninstall iTunes in mac and then install again

You should be able to simply visit: http://www.apple.com/itunes/download/ to download iTunes, and run the installer to overwrite your previous version...
Lamborghini98 wrote:
I want this because i can't restore my iphone 4 with my mac
I don't think this will fix your problem with restoring your iPhone 4 though. That is likely a seperate issue.
but i can do it with any windows?
Yes, you can theoretically restore your iPhone with any computer running the most current version of iTunes (10.6.3) unless there is some other issue.
I get error code(21)
According to this support article: http://support.apple.com/kb/TS3694#error21:
"These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service."
Do you run any anti-virus or third-party firewalls on your computer? Try disabling them and trying the restore process again. It may be possible that one of these security applications is interfering with the iPhone's ability to authenticate with Apple's servers.

Is there any way how i can download and run Window based games, with out installing Windows-thus Bootcamp? and if so, is it free?

is there any way how i can download and run Window based games, with out installing Windows-thus Bootcamp? and if so, is it free?

No, you must install Windows to run Windows software. You do not need to use Boot Camp (yes, it's free because it comes with OS X.)
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

How do I access the End User Licensing Agreement? I clicked on it and it gives me a message that I need to launch Adobe Reader, accept and close and reopen. Trouble is I can't get to an icon for file to launch. I am working on a Mac and have installed Mac

I am using a Mac and have installed Adobe Reader for Mac, latest version. I cannot access the End User Licensing Agreement. I clicked on it and it gives me a message that I must launch Adobe, check that I agree, close and reopen. The problem is I can't find any way to launch Adobe because it appears nowhere on my launch pad, nor in my document files or on the control panel. Because of this, I cannot print bank statements nor can I get into my insurance companies billing department to make a payment. HELP!

How about in your Applications folder?

How do you install windows XP on macbook and use microsoft access

how do you install windows XP on macbook and use microsoft access?

there are two methods to intall windows on your macbook
1st is through Parellel software
2nd is through Boot camp.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

I have an Mac air 2011 and after install osx mountain lion when I do update to some programs like iMovie and iPhoto and make sleep mode to dowenloaded it doesn't dowenloaded in sleep mode it stop please help me

I have an Mac air 2011 and after install osx mountain lion when I do update to some programs like iMovie and iPhoto and make sleep mode to dowenloaded it doesn't dowenloaded in sleep mode it stop please help me

i guess you could put the aiport utility app on your iphone, click on the aiport express there, it will show you how many devices are connected to it and the mac addresses of those devices.

I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not read iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

problem solved.
I phone 4s screen froozen

I purchased a new mac and i installed CS4 Design Standard, it installed but won't open

I purchased a new mac and i installed CS4 Design Standard, it installed but won't open

You're welcome! Glad it worked!
Benjamin
P.S. Be sure to mark the solving answer correct (Java update) to mark the issue resolved and help other user's find solutions to similar problems.

Are there any known conflicts between Mountain Lion and Microsoft Outlook for Mac? After installing, I can't send or receive eMails

Are there any known conflicts between Mountain Lion (10.8.3) and Microsoft Outlook for Mac? After installing, I can't send or receive eMails. Using a Macbook Pro.

Is this a recent problem or has it been going on for some time. If you just updated to ML, you might want to confirm that you've update to the latest MS Office / Outlook patches.

Hello i installed windows 7 on my mac and after installing it i gan't go back to mac os x

Similar Messages

Maybe you are looking for