Hello, I just bought an apple TV, and realised it is 720 HD and the photo that I air play from my Iphone 4 is a bit grainy on my flat screen tv which is 1080p HD. is there a set up where the picture comes out better like it should
Hello, I just bought an apple TV, and realised it is 720 HD and the photo that I air play from my Iphone 4 is a bit grainy on my flat screen tv which is 1080p HD. is there a set up where the picture comes out better like it should?
Hello, I just bought an apple TV, and realised it is 720 HD and the photo that I air play from my Iphone 4 is a bit grainy on my flat screen tv which is 1080p HD. is there a set up where the picture comes out better like it should?
Similar Messages
-
I just tranfer all my photo from my Mac from itune to my Iphone so I can setup Mac back to factory setting after I don't with that, I try to put my photo back to my Mac and Iphoto did not detect any of the photo that I had tranfer from itune it only detect the one rhat i took with the Iphone PLAESE HELP!!!!!!
Hello Partii,
It sounds like you may use a POP account for your email. With a POP account, email applications like Mail and Outlook can remove emails from the server, so when another device tries to check the server for new emails, it doesn't see any.
You may need to adjust settings in Outlook so that the emails are not removed from the server when downloaded. I found an article with more information:
When using a POP email account with multiple devices, email messages may only appear on the first device that receives them. This occurs when an email client is configured to automatically remove email from the server once an email client has received it. You can configure your email client (or clients) either to keep a copy of the email on the server, remove it after a certain number of days have passed, or keep it until you move it from your Inbox.
I recommend reviewing the full article for steps on adjusting these settings; you can find the full article here:
Using a POP account with multiple devices
http://support.apple.com/kb/HT3228
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Is there a way to find the photos that iTunes backs up from the iPhone?
A friend of mine had to replace his phone and something happened when he added the new phone. He can't find his photos that should have been backed up. There must be a file somewhere where they are saved on the computer I would think. Can it be accessed? Also what about contacts?
Thanks for the info. Not sure what he did or if he is very tech savvy. He and his wife bought 3G S phones and her's froze up after a month and had to be replaced. I don't know for sure if he had backed it up or not. I know he went to the Apple Store to get it replaced and he asked them about transferring the contacts and they said they couldn't because the phone was froze up. I know they had it just over 30 days. I don't think they were using another program for their contacts either.
Along the same lines another friend was asking about the photos and if there was a way to access them from the backup on the computer. He also had to replace his phone, but restored it from backup and got all his photos back. He was asking if there was a file somewhere to access those photos on the computer. I don't know how tech savvy he is, and maybe he doesn't realize that when you connect your phone to the computer that it gives you the option to view the photos and then copy them. -
Air play from my iphone 5 to my apple tv-no picture
Does anyone know why I cna't get a picture when using airplay from my iphone 5 to my apple tv. I can use air play with my mac book air.
Make sure you have updated to the Apple TV Software to version 5.2.
See this Apple doc for more info -> How to update Apple TV software
What are you trying to play when the problem happens? Does it happen with all pictures or videos from all apps? -
Hello I just bought an apple iPhone but unable to install any application with every application the system is asking for apple which I don't have so please so something in this matter and so the needful wll wait for ur reply
KiltedTim wrote:
You can't even activate the phone without an Apple ID...
Yeah, you can. It's possible to skip that part of the activation process. -
When I insert a photo from iphoto into imovie, the photo that appears is different from the one that I inserted. Why is this and how can I make it work properly?
WHat version of iMovie, and iPhoto?
THIs forum is for iMovie iOS (iPads, iPhones).
Are you talking about iMovie for Mac? -
Is there any way to recover photos that have been deleted from my phone?
im looking to recover photos that have been delted from my iphone 4. is it possible?
Welcome to the Apple community.
If you have a backup that includes these photos, you could restore your phone. -
Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...Any ideas? Thanks
Hi Alxx911, and John Hammer1. After reading John's reply - " You can plug something into it's headphone jack. though" . I thought i'd try out of curiosity. I plugged in some headphones. I didn't expect anything to happen and nothing happened. The audio jack is for the Dell soundbar which is optional.
Here's a direct copy and paste from the users manual: Section About Your Monitor.
Attaching the Soundbar AX510 / AX510PA (Optional) CAUTION: Do not use with any device other than the Dell Soundbar. NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar AX510/AX510PAonly. To attach the Soundbar: 1. Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. 2. Slide the Soundbar to the left until it snaps into place. 3. Connectthe Soundbar with the DC power connector. 4. Insert the mini stereo plug from the back of the Soundbar into the computerís audio output jack. For HDMI/DP, you can insert the mini stereo plug into the monitorís audio output port. If there is no sound, check your PC if the Audio output is configured to HDMI/DP output.
This monitor has no speakers. (Like John Hammer1 mentioned). The no speakers feature was one of the reasons I chose this monitor.
Good Luck ! -
Hello, I just bought a Airport Express, and on the first day it has a a weak signal. It is very far from my working space and my apartment has very thick walls that might be blocking the signal. I would like to know if I can do anything to make it stronger or faster. If you know please reply.
You need to move the AirPort Express closer to the bedroom.
You can leave the modem at its current location and purchase a longer Ethernet cable to move the AirPort Express virtually anywhere that you want. The closer that you can locate the AirPort Express to your working space, the better the signal will be.
Standard lengths of Ethernet cables are 6 feet (2 meters), 25 feet (8 meters), and 50 feet (15 meters). Any computer / electronics superstore will have a selection of Ethernet cable from which to choose. -
Hello, I just bought a Snow Leopard and I have tried to install this on my macbook pro 2008 (10.5.8) and I can not do it. I have to erase the hard drive before in order to succeed. Please tell me step by step what to do. I appreciate very much your help.
ThanksHere are the directions:
http://support.apple.com/kb/HT3910?viewlocale=en_US
Ciao. -
hello i just bought the new 15'' retina macbook pro and i also own logic pro9. how do i transfer logic to my new macbook?
do i have to some how ask apple to send me a download link? will apple try to get me to buy another copy?
thanks for your reply.openlampost wrote:
... im thinking that i need to download it from apple ...
The only way to do that is to Purchase it from the Mac App Store.
openlampost wrote:
... i bought the boxed set logic 9 as an upgrade from logic express9 ... i simply installed logic using dvd drive. ...
In that case... Install it on your New Mac using the Disc(s) and have all your Serial Numbers handy in case you are asked for them during the Install.
After the successful install... run Software Update to get any and all Updates... Then Restart your Mac and you should be good to go.
PS:
Make sure your MBPr is connected to the Mains for this Long process... -
dear community,
hello i just bought gem from dragon vale's game. and i bought it 2 times, because it said the download has been failed. and it cost about $10. and i just want to buy $4.99
can you help me please?You are not addressing Apple here. We are all just users like yourself
lost/stolen
No app on the iOS device is required.
- If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
- You can also wipe/erase the iOS device and have the device play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
- There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
Hello! I bought an iPod touch 3rd gen at a pawn shop and when i tried to set it up, it would not connect to my iTunes OR Wifi so that I could finish set up. Is there anything I can do to fix this before i take it back and get my money back?
Take it back for a refund.
-
I just bought an Apple TV and i have a bose sounddock with a mini jack in the back and and optical cord with a mini adapter on it (so optical cord going into the Apple TV and the mini adapter on the other end going into my bose dock but i dont get sound?
Not all the sound docks accept both analogue and optical on the auxillary input - I don't think the portable ones does but may be wrong - check the user manual.
As I said earlier all the mini optical (min Toslink) adapter does it make the optical connector fit a smaller socket, it does not convert digital audio to analogue for an analogue only auxillary input.
AC -
i just bought an apple tv and it wont stream music from my imac. when i click on the apple tv music icon it accesses the itunes store and brings up only that music i have purchased from apple instead of all the music i have stored in itunes on my imac.
The music icon will only access your purchased music. You need to go to the computer icon. It must be on and running iTunes, and home-sharing enabled in order for it to be accessible to Apple TV
Maybe you are looking for
-
Hello, I have configured the example scenario given in Seeburger docs. I am with the following errors 1. When I check the log file of seeburger i am getting Error No configuration found 2. When I check the audit logs of File adapter channe
-
Palm desktop for Zire 72 with Windows Vista, 32 bit
I've tried the version 4.1.4e offered on the website, it is not working, though one page on the site seemed to omit that it would work for Vista. What is strange is that it was working on my system just fine until a month ago. I've uninstalled what
-
IP Redundancy on 7200's with CPA's
I have 2 7206's with CPA cards Escon attached to an IBM host. I'm trying to get IP failover to work without using EMIF. If I fail one of the boxes, IP rolls over to the second box. When I power that box back up, IP stops working. If I then do a shutd
-
Mapping with only Outputs, no Target table?
Is it technically possible in OWB to have a Mapping whose output is stremed to the OUTPUT PARAMETER object instead of a Table? I would love to have something like that so that I could convert function into Mappings with Input and Output parameters an
-
I see my spry accordian images in the live view but they disappear in the browser view
Here is my page code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; cha