Hello,i just need some information
Hy,i just have some questions...First,i am in project for creating some website with streaming video.The connection to the host is bad and i need to know if Flash media server can reconnect if connection is lost during playback and second,is there some kind of plugin for subtitles,this is very important,If there is a positive answers on those two questions,the third would be "where can i buy it and how"?
First question: Yes very much. You can write simple logic for reconnection. Also there is new feature called Smart Reconnect which you can use for this purpose.
Smart Reconnect links: -
http://help.adobe.com/en_US/FlashMediaServer/3.5.3/FeaturesGuide/flashmediaserver_3.5.3_fe atures.pdf
http://aspexamples.adobe.com/flash/streamreconnect.html
Second question: - I am not aware of such plug-in personally but there are high chances that it might be available. But i want to know first how you want to achieve it - are you sub titles not embedded in movie itself or is it separate from movie content and if yes in what format. Even if one is not available for ready to use - i think developing one should not be big deal - it can simple as overlay on your client side which gets populated with text at runtime.
Third question: You can download it from http://www.adobe.com/products/flashmediaserver/ (just choose your edition & on that page you should have download link) - OR once you decide to buy you can send your contact details(Name,Email,Phone,Geo Location) to me via private message and i can help you get in touch with right person.
Similar Messages
-
Hello please i need some information about the blackberr...
hello please i need some information about the blackberry instant messenger is how does it work , i heard that i send messages for free from a blackberry to a blackberry is it true ? does it need internet ? and does it matter if the other phone is in another country'
thank you alotHello,
Here is a page with much information about BBM:
http://na.blackberry.com/eng/devices/features/im/blackberry_messenger.jsp
Hope that helps! If not, Please come to:
http://supportforums.blackberry.com/rim/
and register an account. Then post to the applicable forum.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I need some information about jre 1.5 and jre 1.6.
Hello guys,
I need some information about jre 1.5 and jre 1.6.
Suppose if i have jre 1.5 customized with "additional language support" installed in my my desktop, and later on i install jre 1.6. will this jre over write all the esisting settings which was present in jre 1.5?
In short will the version upgrades disable the features of the old Version even though the old version is present in the desktop?
Thanks in advance for your answers.In <2j_j3.1889$[email protected]> =?iso-8859-1?B?VG9t4XMgU3XhcmV6?= writes:
> Hi all, I am developing an acquisition data system for biomedical
>signals and I need to transmit this data from my hardware to PC using the
>USB port. For this, I am writing a device driver for Windows 98
^^^^^^ ^^^^^^ ^^^^^^^ ^^
That's not a trivial step. I would write a small C/C++ program that
exercises your driver (for robustness) just to be sure it's working
right first without crashing your system.
>The problem is that I don't know to use this driver in LabView.
>For now, I think to use a "code interface node" with code writen in C or a
>"call library function" with a DLL.
That's correct. _After_ you got your C/C
++ test program (and USB
driver) above working, then you can convert this little test program
into a DLL or CIN, which can interface with LabView. A DLL might be
easier (slightly) to write, but the CIN will work faster with LabView
and can be designed to be reentrant. The Code Interface Reference
Manual should guide you. Remember, this is a task for an _experienced_
C programmer. You'll need to use handles to pointers into all your
dynamic arrays and such passed into LabView.
After you got your CIN or DLL written, you can use a special CIN
function node to "link" (or bind) your CIN object into LabView's VI
diagram.
SOME THOUGHTS:
There are many hardware devices already on the market today that come
with Windows 98 drivers and DLL (or even CIN) libraries that would work
immediately with LabView. Why don't you save yourself three months of
work and simply buy one of these?
/\ Mark M Mehl, alias Superticker (Supertickler to some)
<><> Internet: [email protected]
\/ Preferred
UUCP: uunet!iastate.edu!mehl
Disclaimer: You got to be kidding; who would want to claim anything I said? -
I have project I want to run and need some information
Hi
I have project I want to run and need some information about technical, consultancy, architecture design
and what I need for this project (hardware and software(
I planning to stream live streaming 24 channels,
The feed is analog from pal STB cable or satellite.
I want to stream in 2 different resolution and bit rates
1. full screen 750-850k
2. 240x360 400-600k
the format is flash h.264
The channels are series, sport, news, and movie.
What recommended card (i have osprey 450e)?
What kind of requirement of computer I need (CPU, MHZ, CORE, RAM).
can i use i7 cpu or xeon cpu?
how many channels i can run in 1 computer?
I need cheap solution for this project around 20-30k$ for hardware.
thnaksI am working on a similar project.
Actually, i can encode 2 streams in h.264 with a resolution around 640X480 on a Intel Xeon E3120 (2 core) 3.16 GHZ configuration.
OS is a windows XP 32 bits. CPU usage is around 75%.
(note: FMLE instances are run with FMLEcmd not GUI mode)
Does someone know if i can gain performance with windows XP 64bits ?
My goal is to encode 4 streams on a single machine, does someone know if a dual CPU, let's say 2 X (4 core) Xeon, is enough ?
I don't know if FMLE support multiple processor with multiple core configuration.
I am maybe wrong, but after reading this forum, it seems many people have problems using FMLE under windows vista. Do we gain performance on Vista vs XP ? -
Hi i just need some pl/sql materials and apps materials
Hi,
friends i am krish getting trained on orcale just need some materials to leanr quickly pl/sql
thnx for the sender
Thanks & Regards
krishfor R12,
http://download.oracle.com/docs/cd/B40089_08/current/html/docset.html
And for pl/sql
http://download-uk.oracle.com/docs/cd/A97630_01/appdev.920/a96624/toc.htm
Message was edited by:
Nitesh Jain -
I need some information redarding Web AS Preview edtion
Hi all,
I have installed WEB AS preview Edition. I need some information regarding this. I have already worked with SAP Netweaver developer studio 2.1 (Trail version) and web AS 6.4. So now what are the extra features or advantages that i will get with the Preview Installation and NWDS 7.1 is what i have get with that preview.
Regards,
Kiran.Hi Ivaylo Ivanov,
I try to login by use:
username : Administrator
password : <master password> (at least 1 number)
I try to login many times but it always fails.
(I am very sure about my password since i also try to reinstall many times - 10th. both J2EE 1.4 and Java EE 5)
Ivaylo Ivanov, do you sure that you test with this new edition. (Not the previous edition)
I see the other persons get the result like me:
Telnet Administration
SAP J2EE Engine v7.100
User name: Administrator
Password:
The user account is either expired, or not valid yet.
Login failed. Reason: The user account is either expired, or not valid yet.
Connection to host lost.
if my login is not correct, it will tell the other messags.
Telnet Administration
SAP J2EE Engine v7.100
User name: f
Password:
Cannot authenticate the user.
Login failed. Reason: Cannot authenticate the user.
Message was edited by: Chart Krobtragolchai -
I need some information about File Download & File Upload
Hi All,
Can any one help me on this, I need some information about File Download & File Upload.
I read tutorial abt file upload and download but some of methods in tutorial are deprecated so i need clear information abt File upload and Download, if possible Code examples.
Thanks
Ragards
Ravi GollaHi Ravi
Check out thses links for examples:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00062266-3aa9-2910-d485-f1088c3a4d71
/docs/DOC-8661#22 [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/202a850a-58e0-2910-eeb3-bfc3e081257f
Otherwise you can simply follow this code for file download
Use the code like this.
1) Create the button and bind the action for it.
2)then write this code in the action.
3) do not write any thing in the init method.
try {
final byte[] content = this.getByteArrayFromResourcePath("C:
xyz.properties");
final IWDCachedWebResource resource = WDWebResource.getWebResource(content, WDWebResourceType.UNKNOWN);
try {
final IWDWindow window = wdComponentAPI.getWindowManager().createExternalWindow(resource.getAbsoluteURL(), "WD_Filedownload", false);
window.open();
catch(Exception e)
wdComponentAPI.getMessageManager().reportException(new WDNonFatalException(e), false);
5) writr the method getByteArrayFromResourcePath
//@@begin others
private byte[] getByteArrayFromResourcePath(String resourcePath)
throws FileNotFoundException, IOException {
FileInputStream in = new FileInputStream(new File(resourcePath));
ByteArrayOutputStream out = new ByteArrayOutputStream();
int len;
byte[] part = new byte[10 * 1024];
while ((len = in.read(part)) != -1) {
out.write(part, 0, len);
in.close();
return out.toByteArray();
//end
Similarly for file upload
Similarly for upload in to server path also do the same
IWDAttributeInfo attInfo =
wdContext.getNodeInfo().getAttribute("upload");
binaryType =
(IWDModifiableBinaryType) attInfo.getModifiableSimpleType();
uploadedName = binaryType.getFileName();
File filename =new File("
<server name>
<folder name>
"+uploadedName ); );
try {
FileOutputStream out = new FileOutputStream(filename);
out.write(b);
out.close();
} catch (FileNotFoundException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace(); -
Need some information on datasource 2LIS_02_SCL
Hi,
I need some information on field BWMNG of datasource 2LIS_02_SCL.
I want to know from which tables this field is getting data and how this field is getting populated.
Your help will be appreciated.
Regards,
Sanjay Chaurasia.Hi Sanjay
Please find this : http://help.sap.com/saphelp_nw70/helpdata/en/e0/5ad638d80cd57be10000000a114084/frameset.htm
Cheers
Chanda -
I need some information on quickviewer input range
Hi
I need some information on quickviewer input range
In quickviewer it is allowing me to input only 5000 or 6000 (BP)records, if i am trying to input more than that it is throwing ABAP- run time error. Is there any other way to input more than that in Quickviewe
kindly please suggest me
Regards
VinayHy Vinay,
you get an error because the work with the Quickviewer is a dialog- Prozess.
If you want a 'work around', set the parameter of the timeout dialog prozess higher.
regards
Torsten -
I recently upgraded my IMac to Lion and have found that my mail account does not include a "mail trash" category similar to "mail sent", making it difficult to retrieve mails I might have sent to trash but find I need some information from. I've searched in settings and preferences and cant seem to find a way to add "Trash" to my Mail categories/folders.
Suggestions?I recently upgraded my IMac to Lion and have found that my mail account does not include a "mail trash" category similar to "mail sent", making it difficult to retrieve mails I might have sent to trash but find I need some information from. I've searched in settings and preferences and cant seem to find a way to add "Trash" to my Mail categories/folders.
Suggestions? -
Recovery Strategy - Need Some Information - Critical
Hello all,
I need help from you all to understand the following scenario:
1.We have a Production database which is running in ARCHIEVELOG mode.
2.This database is supported with FAILOVER Machenism.
3.The backup strategy is as follows
3.1 Sunday Level 0
3.2 Monday,
3.3 Tuesday Level 2
3.3 Wednesday Level 1
3.4 Thursday Level 2
3.5 Friday Level 1
3.6. Saturday Level 2
Now follows my question:
1. If I need to delete some of the old Archieve files, Can I delete them?
2. If I can delete them, up to which date can I delete them?
3. Consider on Sunday the date is 16, and my db is crashed on 20 i.e on Thursday and I have deleted the archieve files till 15 i.e. on Saturday. In this situation can I recover the database completely?
If you need any clarification, please revert.
This is very critical issue for me.
Your help will be appreciated.
HimanshuHi again Himanshu,
In fact you don't even need to restore the archived redo logs if you backup them!
For example in your backup scripts you can includeBACKUP ARCHIVE LOG ALL DELETE INPUT;This will include the in your backup sets, so they'll be targets for your backup retention policy.
Then, if it crashes on monday, you just RESTORE UNTIL "sunday";
RECOVER UNTIL "monday sometime";RMAN will find the necessary backupsets, including those for the archived redo logs and do it for you.
Or you can RESTORE ARCHIVE LOG also. Refer to RMAN guide for syntax.
HTH,
Yoann.
Message was edited by:
Yoann Mainguy
"sunday" and "monday sometime"are not RMAN keywords! (just to get it straight :) ) -
[VIA] Just need some input on a problem I have
I need the experts on this forum to help me with a problem I have. The M/B (6590 KT4 Socket A) had a few problems a while see. Since that time I have not updated my PSU as advised so I expect some abuse for that .
Any way I managed in the to fix that problem as you can see. However a further problem occured which was that the PC ,at will , would restart - this ended being the reset switch which I disconnected and this has never happened since. Now I have another problem ! .
The PC will simply hang with no response at all. It seems only to happen when I am running the capture software. I have checked for updates and applied these to the program (hauppauges WnTV). This set up was running on another PC with a M/B (in my opinon) of inferior quality without a problem (I have since sold that PC).
I will admit I have not run the PC without this program running to see if that is the cause. However I just needed input on suggestions. My PSU is as I said earlier the same as before which is an X Pro 400w these are the shameful Voltage rails :
+5v = 35a
+12v = 20a
-5v = 0.5v
-12v = 0.8v
3.3v = 22a
5+VSB=3a
Also when the PC hung I got the following readings from PCAlert:
1.76 Vcore
3.3v = 3.26v
+5v= 4.97
+12v = 12.24
CPU temp = 44c
System temp = 38c
I must admit that the previous PC had a separate USB2 (which is how the Happauge unit connects) card whereas this PC I use the onboard card. I was also thinking about the RAM as it was one I bought from a computer fair (hears groans) - This is normally something I do not do.
Help input would be appreciatedQuote from: Dr Stu on 26-November-05, 05:58:45
look on the PSU label for the Max Combined Watts 3.3v & 5v and post what it says
KT4 doesn't have a 4pin 12v connector, right? so that board depends on 3.3v and 5v rails
The Max watts are 210Watts
Quote
While waiting for the experts, three things come to my mind:
- IRQ problem, most often some/the card is in the wrong slot.
- Graphics driver, most often you have updated too far.
- Memory problem, most often mixed, but could also be there are things/drivers meeting in the memory that doesn't like eachother. If you have a lot of Autostarting thing that could be the reason, like a CD copying program and the capture program.
It cannot be an IRQ conflict as the Capture card is USB2. Graphics card has up to date drivers. Startup software on this PC is no different to the preivous apart from PCAlert4
Quote
"...It seems only to happen when I am running the capture software..." Have you tried another program system intensive demanding ? If you have done, and nothing happens, it would show that the capture device/driver is giving problems. Is that USB device self powered or takes it's power from USB port ? It's running at USB 2.0 speed ? 22 A to 3.3v. rail is poor for your Mobo. You should post your complete PC specs.
I dont really have any other software than can do that. The USB device is powered by itself.
PC is as follows:
AMD 2100+
1 512mb ram
2 HDD - 1 80gb Hitachi 1 120gb hitachi
Nvidia Geforce mmx 64mb ram Graphics card
1 SCSI CDROM Teac
1 SCSI CDRW Yamaha
1 IDE DVDROM Sony
1 IDE DVDR LG
Quote
Make sure that the pathway to were you want to save the captured video is set correctly. I believe you can set the Audio quality and the Frames Per Second (FPS) and I think that you can set the compression, If in doubt try it without compression and see if that works. I too have a TV card and it seems to me that you are having a config problem. Hope that helps.
The location where the files are captured to is to the secondary drive which is the 120gb
Hope thats enough information -
I need some information about drivers
Hi all, I am developing an acquisition data system for biomedical
signals and I need to transmit this data from my hardware to PC using the
USB port. For this, I am writing a device driver for Windows 98 that receive
data and put it in a memory buffer. I have a VI which graphs this data in
LabView 5.0. The problem is that I don´t know to use this driver in LabView.
For now, I think to use a "code interface node" with code writen in C or a
"call library function" with a DLL. But I need some help with the "code
interface node" because this VI don´t use a .c file. Shortly, I apreciate
some help with this VI or some idea for use the USB port in LabView. Thanks.
TomásIn <2j_j3.1889$[email protected]> =?iso-8859-1?B?VG9t4XMgU3XhcmV6?= writes:
> Hi all, I am developing an acquisition data system for biomedical
>signals and I need to transmit this data from my hardware to PC using the
>USB port. For this, I am writing a device driver for Windows 98
^^^^^^ ^^^^^^ ^^^^^^^ ^^
That's not a trivial step. I would write a small C/C++ program that
exercises your driver (for robustness) just to be sure it's working
right first without crashing your system.
>The problem is that I don't know to use this driver in LabView.
>For now, I think to use a "code interface node" with code writen in C or a
>"call library function" with a DLL.
That's correct. _After_ you got your C/C
++ test program (and USB
driver) above working, then you can convert this little test program
into a DLL or CIN, which can interface with LabView. A DLL might be
easier (slightly) to write, but the CIN will work faster with LabView
and can be designed to be reentrant. The Code Interface Reference
Manual should guide you. Remember, this is a task for an _experienced_
C programmer. You'll need to use handles to pointers into all your
dynamic arrays and such passed into LabView.
After you got your CIN or DLL written, you can use a special CIN
function node to "link" (or bind) your CIN object into LabView's VI
diagram.
SOME THOUGHTS:
There are many hardware devices already on the market today that come
with Windows 98 drivers and DLL (or even CIN) libraries that would work
immediately with LabView. Why don't you save yourself three months of
work and simply buy one of these?
/\ Mark M Mehl, alias Superticker (Supertickler to some)
<><> Internet: [email protected]
\/ Preferred
UUCP: uunet!iastate.edu!mehl
Disclaimer: You got to be kidding; who would want to claim anything I said? -
Can any one give so information about CSS module.i got some information that it is use full for Utility organizations, such as gas, hydro, cable etc..
But can any one elaborate it please....Are you refering to CS module i.e Customer Service?
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CS/PMSMASC.pdf
Regards,
Rajesh Banka
Reward points if helpful. -
I need some information about scripts
hi,
i need detailed information about scripts.tell me where it will available.
bye
sreenu.Hi,
Posting in the ep forum,I believe you require Information on javascripts and client side eventing(EPCF).
Here is the link that you need with regard to this:
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/3e98408d953154e10000000a1550b0/frameset.htm
(Or go to SAP NetWeaver Developers Guide->
IT Scenario-Driven Enhancements to Applications->Running an Enterprise Portal->Core Development Tasks->Creating and Managing Content->Client-side Eventing)
The below document can also be useful.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/enterprise portal client.pdf
If you need an illustration of how epcf can be used , you can refer to this blog
/people/arulraja.ma/blog/2004/12/18/how-to-include-loading-message-in-a-portal-iview-ep6-sp2
Regards,
Harish
(Please award points for helpful answers)
Maybe you are looking for
-
How to change my password on my email account
I changed my password for my Verizon email account. Now how do I change it in my Firefox to match.
-
Where is Adobe_Lightroom_x64.msi
I am using Lightroom version 3.6. My problem is that the desktop icon for this program keeps on disappearing. I open the Control Panel/Program & Features in Windows 7 Pro and click on Repair for Adobe Photoshop Lightroom 3.6 64-bit. The Windows Insta
-
The webpage your are viewing is trying to close the window
Hi. I run an HTML script which in turn runs my Web Form and quickly closes the initial IE window (for neatness). However, it the user first is prompted: "The webpage your are viewing is trying to close the window. Do you want to close this window?" D
-
Hey all, I just bought a new Mac Pro with bluetooth installed, but I'm having some issues. The system finds the bluetooth card and all the associated software (the bluetooth pref panel, the bluetooth menu, etc) seems to be functioning the way it shou
-
Bonjour , Comment faire pour afficher que des colonne paire d'un tableau de 10 lignes et 10 colonnes. Et aussi comment indexer que des colonnes paire d'un tableau et y mettre sur ces colonnes paire par exemple que des 1 et sur les impaires que des 0.