Hello, I'm using a PAP2T and I'm having a problem when I...

Hello, I'm using a PAP2T and I'm having a problem when I dial into a menue, I can dial perfeclty but when I dial into a menu my phone will not send the digits pressed. In other words press 1 for so and 2 for so, I can press either and nothing happens. Recently I rebooted my PAP2T and since then I can't figure out what the problem is. Can anyone help. Thanks.

Maybe this has the fix for your problem:
http://forums.linksys.com/linksys/board/message?board.id=VoIP_Adapters&message.id=440&query.id=157098#M440
Anyway if it doesn’t, just try to search this forum with something like DTMF.

Similar Messages

HT3500 I am using Mac 10.4.11 and I am having a problem when my printer wont print what I tell it too. Please Help

I am using Mac 10.4.11 and I am having a problem when my printer wont print what I tell it too. Please Help!

A warm welcome to Apple discussions!
A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say for your processor speed? What does it say about how much RAM you have?
If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
There are a few more things we might check but this is a good start.
Awaiting your information,
Allan

Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

Try a reset:
- Hold the home button and sleep/wake button down at the same time. When the Apple logo appears release both buttons then try and charge again.
If issue persists try:
- Another known working cable
- Check the charging port for any damage or debris
- You could also use a dry soft bristle toothbrush and gently brush it on the port to clean it of any debris that could be in there

Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian

Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian

Under what circumstances does mail "not leave the mails on the server"?
If you mean that you delete them (or move them out of the inbox) on one device and then find them not in the inbox on the server when you look from another device, that's how IMAP is supposed to work. (Note that the deletion or moving might be the result of rules you have set up in Mail.)
If you mean something else, please explain your issue in more detail.

HT4972 I am using iphone 3g and it is having currently IOS 4.1 version,till what IOS version can i upgrade ? please help me many of my apps are not working esp whatsapp.

am using iphone 3g and it is having currently IOS 4.1 version,till what IOS version can i upgrade ? please help me many of my apps are not working esp whatsapp.

iOS 4.2.1 is the latest version of iOS for the 3G.
Facebook and Whatsapp both require 4.3 or higher.
If you want to use those apps, either use the old version that should be in your iTunes library or upgrade the hardware to a 3GS or newer device.

I'm using CS6 created a new document. trying to use my layers and my work keeps going black. when I

I'm using Photoshop CS6, created a new document. trying to use my layers and my work keeps going black. when I click on the workspace i am able to see my work but when I move my mouse any little bit it goes black again.

Good day!
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Regards,
Pfaffenbichler

I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

grannybel
It would appear that you are destined for the Adobe Photoshop Elements Forum since your question is related to Photoshop Elements and not Premiere Elements which is the focus program where you have posted.
But, while the arrangements are being made, here are a few things for you to think about if you have not already
1. Reset Tools - Select Brush Tool, then
2. Delete Settings File
Go to Full Editor/Edit Menu/Preferences/General and click on the option "Reset Preferences on Next Launch".
We will be watching for your progress.
Thank you.
ATR

I'm using an iBook G4. I'm having a problem with a lengthy Microsoft Word (2003) document crashing. It keeps telling me that there's a problem and then working and working. I have to do a forced shutdown.

I'm using an iBook G4. I'm having a problem with a lengthy Microsoft Word document. It keeps freezing when I try to make a change in it. The computer is working and working. Then I have to use a forced shutdown. And it starts all over again. Suggestions?

Is there sufficient free space on the iBook's startup disk (typically called Macintosh HD)? The OS and apps use free space to write temporary files, and it free space becomes too low, it can cause the Mac to bog down. Low free space also makes whatever free space is left fragment into tiny pieces scatter all over the hard drive, making the problem even worse. If it more than 90% full, you should free up some space.

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.
Can not load the Organizer from the icon at the bottom of Editor screen, from the icon on the MacBook Air dock (OS 10.10.2), nor from the file in applications located with Finder.
I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences. I have searched on line for other options but not found any.
Can you help me?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I just updated Safari with version 5.1.10 and now I cannot use "open location". Anyone else having this problem and are there any solutions?

I just updated Safari with version 5.1.10 and now I cannot use "open location". Anyone else having this problem and are there any solutions?

Ok ...
Try troubleshooting extensions and third party plugins.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

I just got a used Canon ZR850 and I'm having trouble downloading my video onto my Windows 7 computer

I just got a used Canon ZR850 and I'm having trouble downloading my video onto my Windows 7 computer. I have a FireWire that works fine with my ZR830 but not with the 850. The connection isn't registering. What can I do?

Without proper system information and other details nobody can help you. and this error means what it says - some other install process is still active, even if it may not do so visible. Could be a silent update of a virus scanner or something, could be a botched install of another program, not even specifically Adobe. As a start, always reboot your computer and then try again. For anything else we need much more info.
Mylenium

I bought a used Iphone 3 and I am having difficulties acceding programs because the apple id slots are full. Does anybody know anything My phone is disconnected right now and I am having issues with my home phone so I cant call Apple Support???????

I bought a used Iphone 3 and I am having difficulties acceding programs because the apple id slots are full. I need help knowing how to delete these accounts so I can put my apple account on it .
-thankyou The Roofer

You should restore the iPhone to factory settings so as to clear off all data and content from the former owner.
http://support.apple.com/kb/HT1414
Then you can set it up with your own Apple ID and sync/download your content.
Regards.

I have used Pages 09 and Keynote without any major problems until this new update. I have read many of the fixes but have a problem. When you get Pages 09 and Keynote back, Apples continues to want to update the 09 system. So it stays updated.

I have used Pages 09 and Keynote without any major problems until this new update. I have read many of the fixes but have a problem. When you get Pages 09 and Keynote back, Apples continues to want to update the 09 system. So it stays updated. I have had to turn off my auto updating that was nice but I'll do it one at a time in order to keep the Pages 09 and Keynote. When something works don't mess with it. Any fixes out there?

I can't say that I have had a problem playing videos in Flash because I could always play them in browsers other than Firefox.
In Firefox Tools>options>Advanced Hardware acceleration is turned on.
I don't know if that is different that tuning it off and on in Flash or not, but for now it is a moot point.
As I stated in my previous message, after following all earlier suggestions/instructions nothing helped. But The latest one, someone suggested that maybe version 17 of Flash might be a stable version.
I made no other changes except to install it, a few days ago, and so far so good.
Many thanks for your help,
Giovanni

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

I downloaded the 09 version without deleting the 0, and now I am having some problems : when I open a document, it opens with 09, and then when I try to re-open it with 08 it is not possible !

I downloaded the 09 version without deleting the 08 (didn't know), and now I am having some problems : when I open a document, it opens with 09, and then when I try to re-open it with 08 it is not possible ! I have a message saying tha "the fichier index xml is absent" (my computer is in French. I want to work with pages 08 until I get familiar with the 09 version. What shall I do ? What does this happen?

Once you open the files in the new version you can't open them in the old version. Pick one version to use (have to be 9 now as you already have converted files)

Hello, I'm using a PAP2T and I'm having a problem when I...

Similar Messages

Maybe you are looking for