Hello i made a site using the 3 platforms: desktop, tablet, and smartphone but... on tablets and smartphones appears the desktop design, any idea why?

Vivek,
I've checked the "Redirect from Desktop" and after uploading the website into the hosting account, it still appears in the desktop version. Would you please take a look at this? I hope you can see what I've missed. Thanks.
Initial BC version during construction: Oklahoma Immigration Attorney- Jonny Randall. Immigration, Criminal, Divorce, and Bankruptcy Defense
Uploaded version into hosting account: Oklahoma Immigration Attorney- Jonny Randall. Immigration, Criminal, Divorce, and Bankruptcy Defense

Similar Messages

My daughters iPhone is frozen with the apple showing on the screen. We have turned it on and off but it is still stuck on that screen. Any ideas why or how to correct this?

My daughters iphone4 is frozen to a blank screen with the apple on it. We have turned it on and off and it still remains on this screen. We cannot access gef phone at all. Any idea why this is happening or how to correct?

connect it to the computer/itunes you normally do.

HT1597 I created a podcast, but the picture isn't appearing in iTunes. Any ideas why?

I created a podcast and its now in iTunes, but the pic isn't in iTunes, but it was there when it was submitted. Any ideas?

Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/

HT3275 I've 1.85TB empty space on my time Machine, but it only backs up to the beginning of the previous month. it should have weekly back-ups for every month before that. Any ideas why it deletes stuff older than a month?

I've 1.85TB empty space on my Time Machine, but it only retains back-ups to the beginning of the previous month. I should be able to access weekly back-ups for every month before that until the disk is full. Any ideas why it deletes stuff older than a month?
Thanks, Rigby.

If you are using Ethernet to connect your Mac to the Time Capsule, are you allowing at least 2-3 minutes for Time Machine to fully load when you open the application to see your backups?
If you are using wireless to connect, you may need to allow 8-10 minutes or longer for everything to fully load, depending on the speed of your wireless connection.
If you see only white time "bars" on the timeline at the right of the screen, you are seeing temporary backups. Permanent backups are displayed with purple "bars".

I have a new ipad air, and the notes app does not work right. I write a note and it will keep it for several days, or weeks and then I go back to it later and it has disappeared. This has happened several times. Any ideas why?

I have a new ipad air and am having trouble with the "notes" app. When I write a note to keep, it will stay there for a few days or a week, and then it disappears. This has happened several times. Can anyone suggest why this is happening and how to fix it?

Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
Normal or safe mode still has same result. No startup, no option button and no customize.
Thanks for your help. Got any other suggestions?

Hi, I downloaded Acrobat XI Pro student/teacher version in 2013, now for some reason I cant combine pdfs anymore, I keep getting the message/ pop up option to buy/ download trial of Adobe Acrobat XI PRO. Any ideas why this might be happening? thanks.

[image containing serial number removed]

I suggest that you Contact Customer Care - click on the Still need help? button to chat with an agent. Phone support is also available Mon-Fri during US daytime.

In Safari, the top of of the screen is no longer white; it's a dark gray, and everything is in shades of gray. The line that shows a page is loading is now white instead of blue. Any ideas why it's so dark and in black/white?

All of a sudden, in Safari, the top of the page is no longer white; instead it's a dark gray, and the bar where you type in a web address is a slightly lighter shade of gray. The rest of the page is in color like always. Also, the line that shows a page is loading is white against the gray background, isntead of the usual blue. Any thoughts?

Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.

I bought and paied the Creative Cloud but when I open Photoshop appears the message: "continue the trial". Why?

I bought and paied the Creative Cloud (€19 por month) but when I open Photoshop appears the message: "continue the trial". Why?

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Can anyone explain what the other section section in the HDD usage description is for ? I recently used iphoto to send a mail and this "other "section inrease the usage by about 1GB....any ideas why ?

Can anyone explain what the "other" (yellow colour) section in the HDD usage description is for and what it does.It is under the about this mac section and storage option?
I recently used iphoto to send mail with photos attached and this "other" section increased by about 1GB. The mail size was around 900KB.....any ideas ?

Shurig wrote:
Thanks gor replying,,,this is my first time on this site.
Any idea why the "other" continues to increase. I have just got got my mac so no new apps installed yet only been using it for mail and web browsing. I tried the iphoto mail last night and noticed the the "other" section had increased by 1GB which I thought was rather larger. Do you know what this setion actually does ?
Also do you know if it is possible to delete the iphoto emails.
All of your 'stuff' that is not Music Movies Apps Backups or Photos is in Other, that means all your emails, all your files etc, why don't you just leave well enough alone, this is not windows and doesn't need tinkering with,

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option).

Hello sir i have IPhone 5 this imei is : ******** and i but my mail and password but the icloud tell me its wrong please help me my mail is : ******** and my password is ********

hello sir i have IPhone 5 this imei is : ********** and i but my mail and password but the icloud tell me its wrong please help me my mail is : *********
and my password is *******
<Personal Information Edited by Host>

You might try the following steps:
Restart the device by holding down the on/off button until the power down slider appears.
Try entering your password in another location (i.e. when you are using a different wifi network)
Reset all settings (settings > general > reset), this resets some of your settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It does not remove any of your data.
Try signing out of iCloud and back in (only if find my phone is disabled)
If this doesn’t help your best option may be to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.

I have a iMac (20-inch, Mid 2009). On start up It will sit at the White screen with the logo and the wheel that spins under it. It will not go past this point? Any ideas?

I have a iMac (20-inch, Mid 2009). On start up It will sit at the white screen with the logo and the wheel that spins under it. It will not go past this point? Any ideas?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

I just found my old ipod touch (i think 1st generation) and would like to let my toddler use it instead of my phone. I am trying to download apps but it say I need to update to 4.3 but it won't let me update. I have the most recent itunes. any idea why?

I just found my old ipod touch (i think 1st generation) and would like to let my toddler use it instead of my phone. I am trying to download apps but it say I need to update to 4.3 but it won't let me update. I have the most recent itunes. any idea why? I saw a thread saying to purchase the newest software (that was posted a few years ago) I paid 4.95 for the software and it's still saying it can't be updated. Am I just SOL??

The 1G iPod can only go as high as 3.1.3. The 1G does not have an internal speaker or volume buttons on the upper left edge.
Identifying iPod models
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Apple Club - filter apps by iOS version.

Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?

MacBook Pro 2009
Model Identifier: MacBookPro5,1
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Software OS X 10.8.5 (12F45)
Iphoto '11
Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?
"Your photo library is either in use by another application or has become unreadable"
Offered solution doesn't work:
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
I can't download photographs from my iphone or my digital camera.
Any ideas on how I can solve this problem?
There is a possibility that when I went to update applications that I started to install Mavericks which I then interrupted and cancelled. I am not definite that this caused this problem but it was at about the same time as when this problem started.
Many thanks,
Ed

I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Hello i made a site using the 3 platforms: desktop, tablet, and smartphone but... on tablets and smartphones appears the desktop design, any idea why?

Similar Messages

Maybe you are looking for