Hello i need help please i installed graphic card and nothing comes up only black screen

plz help me out  i bought a new psu 780w  i got 2 graphics card that work in my old pc but  on the new pc they dont the fan spins everything goes good but no screen when i plug my graphic card in ? what to do ? 
http://support.hp.com/us-en/document/c04177680
this is my pc 
This question was solved.
View Solution.

I fix it thanks for the replay . I just had to play around in the bios for a bit lol like for 2h but I made it work

Similar Messages

  • Need help with power supply & graphics card upgrades

    I have a HP Pavilion p6320y that I bought 8 months ago. AMD Phenom II x4820 Quad Core processor.   I play WoW and since the last big patch, have been suffering with low fps. I updated drivers and followed all the advice given to me by Blizz and finally figured out that my Nvidia GeForce 9100 (integrated graphics) isn't good enough anymore.
    I checked my computer and discovered that I have a 300w power supply (12V) and read on another post here that something stronger than 300w is needed to run a decent graphics card.
    Now for my questions:
    How much of a power supply can I upgrade to without hurting my computer, but will be enough to run a good card?
    What would be a good graphics card for this computer?
    I've been looking at the Nvidia GeForce GTX 460 1GB GDDR5 PCI Express graphics card and wonder if that will work on my computer.  Most of the nicer cards seem to be the PCI Express and I'm not sure if that will work.
    Any advice will be most helpful. I have some experience with the inner workings of my PC and would like to fix this myself instead of running to the closest computer shop and paying someone else to. Thanks!
    This question was solved.
    View Solution.

    Well, you are starting out from a fairly low baseline with the integrated graphics. It will not cost much to have a substantial increase if all you want to do is run WoW without error messages. Yes, the 300w power supply is an issue and rules out any card that will require its own power (i.e. needs its own power cord like a hard drive) but there are several mid-grade cards that can run off bus power alone (i.e. just from the pci-e slot itself). Just taking a quick look at newegg.com I see the following:
    GeForce 9400 under $50
    Radeon HD 4650 under $50
    GeForce 9500GT a little over $50
    Any of these should get you where you want to be and not require a PS upgrade. The slot you have available is a PCI Express x16 slot so don't look at AGP cards; they will not work. If you want to install the card you mention you need to get a better PSU.

  • NEED HELP PLEASE Setting up 2 VLANS and a redundant WAN connection

    I have a remote branch office which is actually a huge bar/lounge. The bar wants to enable patrons to access the Internet with their wireless laptops. I want to prevent those patrons from accessing our private network, and also prevent them from traversing our static VPN tunnel back to HQ.
    The bar processes all credit cards via the T1 connection, and this has caused us to lose money every time the T1 goes down while we're open, since there is no WAN redundancy right now.
    Here is my current hardware configuration:
    1) one PIX 501 50-user 3des.
    2.) two Dell 3024
    3.) one Aironet 1100(g) AP.
    Current LAN Network: 10.35.35.0
    (internal employees only, static VPN tunneled to remote HQ network)
    Current Wireless SSID's:
    SSID1=PRIVATESSID
    SSID2=PUBLICSSID (not currently in use, waiting to figure this out)
    Current WAN: one T1 connection.
    WHAT I WOULD LIKE TO DO AND NEED HELP FIGURING OUT:
    #1a) I want to create two separate VLAN's that are able to share the WAN connection, but not be able to "see" each other.
    #1b) These VLAN's would be mapped to their respective SSID's on the AP (PRIVATESSID>10.35.35.0 and PUBLICSSID>192.168.1.0).
    #1c) The 192.168.1.0 network should not be able to traverse the static tunnel between the branch site and HQ.
    #2) I would like to install a backup WAN connection such as a modem 56k dial-up to an ISP or a cable modem to an ISP. In case the primary T1 goes down, I would like the router to automatically dial out over the modem conection and route all Internet bound traffic over that backup WAN connection, until the primary comes back online.
    Question 1:
    I'm assuming I need a router to do the intervlan routing. Could this router also do the on-demand WAN backup dialing to an ISP via analog modem?
    What IOS version and flavor (IP base, IP+, etc.) would I need? What is the cheapest router I can do all that with (i.e. 2620/2621/1720/3600 series)? What WIC's or NM's would I need?
    Question Two:
    I would like to prioritize PRIVATESSID's traffic over PUBLICSSID's traffic, which I know I can do on the access point. Can I do this on the router so that any 10.35.35.0 traffic takes priority over any 192.168.1.0 traffic?
    Question Three
    If the primary T1 WAN connection goes down, I don't want the router to re-route the 192.168.1.0 traffic over the backup 56k dial-up WAN connection. That traffic can wait until the T1 comes back up.
    Any help you can provide would be very much appreciated.

    Assuming your access points can place SSID into separate vlans and support 802.1q trunks then I can attempt to answer your questions. There are seperate secuity issues with both SSID for protection and VLANs for seperation but in your case in may be minimal.
    q1
    Any cisco router that will run 802.1q trunking will work. Since you are looking at older routers you will need IP+ to get it. Even 2610's will support 802.1q on their 10m ethernet at the correct code level but 10m and 802.1q is sorta nonstandard. Since your backup is only 56k you can use the internal modem port as a dial backup. A wic-2a/s will also work if you prefer not to use the modem port. You will need some wic to run your t1 line. If you are planning to leave the t1 on another router it makes the next 2 questions much harder.
    q2
    This is fairly simple and depends on your ios level. "priority queing" is supported on even the older software. I assume you do not control the far end of the t1 line since it sounds as if this goes to a ISP.
    You will need to have them do the QoS since most issues with the internet are inbound and not outbound. You can only control outbound traffic.
    q3
    If the T1 is on the same router then this is fairly simple. You can just put a floating static default route in that will cause the dialer to come up if the the t1 goes down. There is no easy way to protect against the line being up but no traffic passing. This is also why it would be best to have the t1 on the same router. If its not you will need to get very creative to solve this. You could build a GRE tunnel to a remote location and montior the tunnel or run a routing protcol over the tunnel. In the newest software you could use SAA and policy routing to force the traffic over the dialer but the router must support ios 12.4.
    3a. You mentioned a cable modem as a backup. That can be much easier sometimes since it is all routing and no dialer interfaces with nasty modem issues. This does not make the issue of the t1 not on the same router easier.

  • Need help bad. Installed new HD and I dont want to lose my music on ipod

    Can someone please help I had a HD crash and had to install a new HD. but when I plug my ipod into my computer it is telling me I have to reformat. I have allot of songs I purchsed and I dont want to lose them.
    Is there a way to transfer playlists and songs with out formatting?
    Please help
    Thank you

    Check out the instructions/suggestions here.
    Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it can be messy.
    Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
    One of the most recommended is Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    Another free program is Pod Player.
    There is also CopyPod. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.

  • Need help finding the right graphics card for my computer.

    I have a 
    HP Pavilion Slimline s5414y Desktop
    here's a link to my model
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=... I recently purchased a graphics card for it, but it was too big for my computer.
    hopefully this time around I'll know the exact one to get.
    I need a reasonably good card to play games on. 

    osoignite wrote:
    I have a 
    HP Pavilion Slimline s5414y Desktop
    here's a link to my model
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=... I recently purchased a graphics card for it, but it was too big for my computer.
    hopefully this time around I'll know the exact one to get.
    I need a reasonably good card to play games on. 
    Just get a new motherboard. You can get a cheap one that supports all the hardcore nvidia/ ati models for less that $100.

  • Need help please on installing updates.

    Hi,
    I am NOT a techy or computer savvy at all so please don't laugh at my question.
    So, I just realized that in Preferences in Adobe Reader the box that is selected regarding updates says "Automatically download updates but let me choose when to install them."
    Therefore, do I have a ton of updates just sitting in my downloads folder?? If so, how can I locate them and then install them?
    I am on a MAC OS X Yosemite 10.10.3
    Thanks all!
    Tried to save several different files to pdf from a .gov site which gave me an error code yet allowed me to complete the steps of saving. Went into docs folder (where I'd saved them to) and tried to open each and every one of them. Each one gave me an Adobe Reader error saying, "There was an error opening this document. The file is damaged and could not be repaired." This is what led me to fiddling around a bit and finding this preference that I mentioned above.
    https://www.pinterest.com/pin/create/extension/

    Hey!
    Your photos' need to be deleted from the folder you are 'syncing' to.Obviously if this is the only copy of said photo you mustn't do that.
    Create a new folder called say"iPod photos'" on your desktop and copy the ones you want to that folder.
    When you connect your iPod, in the summary page click on 'Photos' tab and set to sync your photos from there.There is no way to delete your photos direct from the Touch.
    Music is different again.You don't have to delete your music off the pod.
    You can either create a new playlist with all the songs you want on it and select to sync from that or just 'un-check' the box next to the song in iTunes.Next time you sync it won't add these to your pod but they remain in your iTunes library.Simple.
    Read about playlists in the manual as they are very flexible.
    Cheers,
    John

  • I need help please with arrows Graphics

    I want to creat a flow diagram in java swing.
    the nods will be a JButtons, and between this buttons I'll paint arrows with Graphics.
    I want to create this dinamic (the button as massege, in my database I have columns names: msg_id, msg_number):
    button (msg_id = 1, msg_number =0)
    | | |
    b1 b2 b3 (b1 ---> msg_id =2, msg_number = 1)
    | |
    b1.1 b3.1 (b1.1 --> msg_id = 3, msg_number = 2)
    |
    b1.1.1 (b1.1.1 --> msg_id = 4, msg_number = 3)
    How can I calculate and create dinamic way the arrows order between the buttons?? (I have code that create an arrow http://forum.java.sun.com/thread.jspa?forumID=57&threadID=656349).
    I wrote recursia method:
    public void myMethod(Integer msg_id)
    // MsgStatements - class that select all msgIds to list where
    // msg_number = msg_id     
    MsgStatements msgStatements = new msgStatements();
    msgStatements.getMsgSons(msg_id);
    List<Integer> sons = msgStatements.getMsgSons();
    for(int index = 0; index < sons.size(); index++){
    System.out.println(sons.get(index));
    //myMethod(sons.get(index));
    }

    I also want the same if any body know please reply
    I want to map different fields in two lists by arrows how can i achieve
    it. if know please let me know

  • Hello I need help please with my account apple I'd

    Hello
    I forgot the security questions in my apple id and I can not download apps
    without it I tried to be helped support what is listed on the page and do not
    have the option below and click the blue reset security questions.
    And I'd like to know how I can reset it?
    Thanks

    The Three Best Alternatives for Security Questions and Rescue Mail
         1.  Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
         2.  Call Apple Support in your country: Customer Service: Contact Apple support.
         3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • HT201274 I erase all data and content from my ipad mini, more than 8hrs nothing come out beside black screen and loading. help plz?

    How long it takes to finish this reset?

    It's taking far too long.
    Disconnect and reset.
    Hold the Sleep and Home button down until you see the Apple logo.

  • HI. When I plug in my charger and use my macbook, I feel some kind of roughness on the body. It feels like some current flowing around it. Need help please.

    HI. When I plug in my charger and use my macbook, I feel some kind of roughness on the body. It feels like some current flowing around it. Need help please.

    My 2006 MacBook Pro and my 2011 MacBook Air both do it.  It happens because the earth ground stops at the power brick and is not carried through to the case of the machine.  It is not dangerous or the machine would not have been UL approved.
    Since I operate on battery 99.9999% of the time it doesn't bother me at all.

  • Hi i need some help my ipad wont turn on and nothing will come up on the screen so  what shuld i do to it because its a school ipad not my own one?

    i need help i cant turn on my ipad and nothing comes up on the screen so what should i do?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Hello, I need help with my macbook pro. It looks like I cannot install anything anymore. Everytime I try to install a new software, use the migration assistant or click the lock to make changes, it simply does not react.

    Hello, I need help with my macbook pro.
    It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
    I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
    So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
    I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
    I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
    I am running Lion 10.7.3.
    Regards,
    Nicolas.
    (I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )

    You probably won't like this suggestion, but I suggest you reinstall Lion.
    First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

  • TS1702 Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

    Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

    Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

  • Hello, I have a problem on my iPhone every second turn on and off I mean it shows the apple and off and again shows the apple icon and off and tried to Restore and it hangs on my iPhone and then waits Error 3004 Please I need help please!

    Hello, I have a problem on my iPhone every second turn on and off I mean it shows the apple and off and again shows the apple icon and off and tried to Restore and it hangs on my iPhone and then waits Error 3004 Please I need help please!

    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200.
    These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    I would guess your iphone has been hacked ( jailbroken ) ring any bells ?

  • HELP PLEASE cannot install Mac Osx

    hey I really need help please!
    I tried to modified my dock using my resources folder in the dock components but I surely did something wrong cause when I tried to click on time machine, it said that I need the right osx version.
    So I restarted my computer but it just wont start, i see the spinning gear over and over again. So i decided to reinstall mac os x tiger and to reupgrade to leopard afterwards.
    I restart m computer, hold C, get to the install process and when I need to choose my volume, I choose my HD, the one in the iMac but its says cannot install on it because of a Volumecheck problem...
    I really need to reinstall it without loosing my data on it I have some important photos for my work, I NEED THEM!
    HELP!

    Hello and welcome to the Apple boards
    If you have been using Time Machine, you can restore your system from it using the Leopard DVD and following the instructions on this link:
    http://www.peachpit.com/articles/article.aspx?p=1091577&seqNum=6
    You might first try booting from the DVD and repairing your HD first. The tools are in the Utility folder on the DVD
    You boot into the DVD by starting the computer and holding down the "C" key.
    Hope this helps a bit.

Maybe you are looking for