Hello!i need help

hello!
i need help with my i pad 3
i cant type anything anymore .only it shows a picture with a cable and the i tunes sign
now at i tunes says that i have to clean the i pad up...that means i will loose all my pictures there???i have about 1500 pictures
but not in the i cloud ,only on the i pad
are the pictures really gone???please help me,i am very sad because mostly pics of my daughter through the years
greatings from germany
melli

Your iPad needs to be restored by connecting it to iTunes on your computer. If you have a backup on your computer or in iCloud you can restore that backup to your iPad. If you have no backup your data is already lost. Follow the on screen directions, start iTunes 11.1 or later on your computer and connect your iPad. You should be guided through the restoration process.

Similar Messages

  • Hello, I need help with my macbook pro. It looks like I cannot install anything anymore. Everytime I try to install a new software, use the migration assistant or click the lock to make changes, it simply does not react.

    Hello, I need help with my macbook pro.
    It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
    I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
    So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
    I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
    I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
    I am running Lion 10.7.3.
    Regards,
    Nicolas.
    (I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )

    You probably won't like this suggestion, but I suggest you reinstall Lion.
    First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

  • Hello i need help for adobe creative cloud...when i launch application adobe  cc 2014  for photoshop or illustrator.....the apps launch and i can see the workspace and menu bar  for a while and  suddenly this application close automatic

    hello i need help for adobe creative cloud...when i launch application adobe  cc 2014  for photoshop or illustrator.....the apps launch and i can see the workspace and menu bar  for a while and  suddenly this application close automatic

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • Hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

    hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

    hey Sally,
    Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to  you
    http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
    Regards,
    A. Zaatari
    National Instruments
    Applications Engineer

  • Hello, I need help to retrieve deleted information to partition an external hard drive. What should I do?

    Hello, I need help to retrieve deleted information to partition an external hard drive. What should I do?

    I'm not about the question, and giving you the right answer requires me to ask a few more questions.
    Do you want to retrieve deleted information for future usage, or to completely delete a partition? The latter is straightforward: simply erase the partition. The former is more complicated: it's very difficult, even using available commercial software, to recover deleted information. If the data is important, you may want to contact a professional like DriveSavers. It won't be cheap.

  • Hello,I need help.ipad 3 does not support flash media player.which player must I download instead of flash media player?

    Hello,I need help.ipad 3 does not support flash media player.which player must I download instead of flash media player?

    Flash is not supported on the iPad - and as Adobe have announced that they are stopping development on all mobile versions of it, it probably never will be.
    Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store.

  • Hello i need help looking for fire fox 64 bit i have 32 bit it really slowing down my laptop

    hello I was told there was a 64 bit that I can use for fire fox iam using windows 8.1 but I can only find fire fox 32 bit I need help to get 64 bit plz and thx

    locking this question as duplicate, please continue at https://support.mozilla.org/en-US/questions/1047357

  • Hello i need help, i have a macbook pro 13 late 2011 with 4gb of ram, 500gb hdd and i5 intel processor is really slow

    hi i need help, im new on mac, i bought the las year a macbook pro 13's  late 2011 with 4 gb of ram and 500 gb of hdd, i5 proccesor of 2.4. the mbp was working ok, until yesterday, i was working on keynote and then,  it started to getting really slow, then it frozzen, and the little umbrella start to appears,i tried every thing, i shut down the power button, wait a minute then i power up, and nothing, i run the ccleaner, i check the hdd status, the ram, and everything was ok,  i  even  boot  up the system like fabric and still nothing i got the umbrella everything than i run an application. please please help me.
    what i have to do?????????????

    Try a Safe Boot to clear the dyld_shared_cache (dynamic loader cache)
    SafeBoot  http://support.apple.com/kb/HT1564
    Safe Boot, which automatically rebuilds this cache (among other things).

  • HT204406 Hello, I need help with my iTunes match

    Helo, I need help with iTunes Match.
    I signed up for iTunes match.  It did its thing and now it is supposed to have every one of my songs in the cloud.
    I checked for Ring my bell (Which I purchase from iTunes) and it is not on my iTunes on my computer anymore?
    I did match to give my 4S with limited memory and over 400 songs the ability to put all songs in the cloud, then by connecting to my computer, somehow I can tell my phone to not sync with match, the re sync and all the songs would be deleted from my phone and then I could down load any songs I wanted on my phone, thus giving me a bunch more memory.   I could not figure out how to do this? 
    Can you please help me.  Thank you.

    You probably won't like this suggestion, but I suggest you reinstall Lion.
    First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

  • Hello guys need help with reverse array

    Need help reversing an array, i think my code is correct but it still does not work, so im thinking it might be something else i do not see.
    so far the input for the array is
    6, 25 , 10 , 5
    and output is still the same
    6 , 25 , 10 , 5
    not sure what is going on.
    public class Purse
        // max possible # of coins in a purse
        private static final int MAX = 10;
        private int contents[];
        private int count;      // count # of coins stored in contents[]
         * Constructor for objects of class Purse
        public Purse()
           contents = new int[MAX];
           count = 0;
         * Adds a coin to the end of a purse
         * @param  coinType     type of coin to add
        public void addCoin(int coinType)
            contents[count] = coinType;
            count = count + 1;
         * Generates a String that holds the contents of a purse
         * @return     the contents of the purse, nicely formatted
        public String toString()
            if (count == 0)
                return "()";
            StringBuffer s = new StringBuffer("(");
            int i = 0;
            for (i = 0; i < count - 1; ++i)
                s.append(contents[i] + ", "); // values neatly separated by commas
            s.append(contents[i] + ")");
            return s.toString();
         * Calculates the value of a purse
         * @return     value of the purse in cents
        public int value()
            int sum = 0; // starts sum at zero
            for( int e : contents) // sets all to e
                sum = sum + e; //finds sum of array
            return sum; //retur
         * Reverses the order of coins in a purse and returns it
        public void reverse()
           int countA = 0;
           int x = 0;
           int y = countA - 1;                                          // 5 - 1 = 4
           for (int i = contents.length - 1; i >=0 ; i--)                        // 4, 3 , 2, 1, 0
                countA++;                                             // count = 5
            while ( x < y)
                int temp = contents[x];
                contents[x] = contents [y];
                contents [y] = temp;
                y = y- 1;                                         // 4 , 3 , 2, 1 , 0
                x = x + 1 ;                                             // 0 , 1,  2  , 3 , 4
    }

    ok so i went ahead and followed what you said
    public void reverse()
          int a = 0;
          int b = contents.length - 1;
          while (b > a)
              int temp = contents[a];
              contents[a] = contents;
    contents [b] = temp;
    a++;
    b--;
    }and its outputting { 0, 0, 0, 0}
    im thinking this is because the main array is has 10 elements with only 4 in use so this is a partial array.
    Example
    the array is { 6, 25, 10, 5, 0, 0, 0, 0, 0, 0,}
    after the swap
    {0, 0 , 0 , 0, 0 , 0 , 5 , 10 , 25, 6}
    i need it to be just
    { 5, 10, 25, 6}
    so it is swapping the begining and end but only with zeroes the thing is i need to reverse the array without the zeroes                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Hello Friends need help in ALV oops

    Hello,
    My requirement is that in my ALV ouptut i will edit one cell when i am editing i.e if its is 200,00 i will change it to 300,00 before changing it should ask me wheather to change it or not i need to dispaly a dialog box with yes or no option if i click yes then it should accept the value 300,00.
    I am using ALV OOPS.

    Hi,
    You can achieve this as below,
    DATA: w_result TYPE c.
      METHOD handle_user_command.
    *   Handle own functions defined in the toolbar
        CASE e_ucomm.
          WHEN 'CHANGE'.
    CALL FUNCTION 'POPUP_CONTINUE_YES_NO'
      EXPORTING
       defaultoption       = 'N'
        textline1           = 'Do you want to change the value?'
    *   TEXTLINE2           = ' '
        titel               = 'Confirmation for change'
    *   START_COLUMN        = 25
    *   START_ROW           = 6
    IMPORTING
       answer              = w_result.
    IF w_result = 'J'. "J is for yes.
    "Write your logic for saving the changes
    ENDIF.
      ENDCASE.
      ENDMETHOD.                    "handle_user_command
    Hope thi helps you.
    Regards,
    Manoj Kumar P

  • Hello really need help

    Hello, First time here.  I'm lost and could use some help.
    I hooked up my computer (Acer Aspire X) to my television through the HDMI port.  I watched a movie, everything seemed to be fine.  But now I am unable to exit that mode.  When I select the Intel Graphics window, and try to change to single display, and chose my monitor, I lose everything.  My monitor displays "Input out of range" and the television shows no signal.  I am able to get back to the dual screen using the win-p hotkey.  But I cannot get out of this dual mode.  When I try to watch television, the monitor goes blank.  The only way I am able to use my computer is if I have the television and the monitor both going.  How do I get back to be able to use just my monitor?
    If this is the wrong place for the question, please point me to the correct place.  I'm so lost.
    Thanks
    Jerry

    Good to hear it. sorry about laptop desktop confusion, i read Aspire and thought about laptops.  By the way, probably your TV has an higher resolution than your desktop monitor, so the desktop try to matches but can't since it's out of range. So you need to set the TV to a lower resolution, to match desktop monitor when using  Mirror setting. 

  • Hello i need help in itunes.

    hello, i recently downloaded some cd's and added to my itunes library but albums and songs say unknown. how can i name songs/albums? please help! thank you!

    File>Get Info

  • Hello I need help in installing adove flash player

    please help me

    To better assist you with this issue we need to know:
    What is your operating system? (Windows or Mac) (XP, Vista, 7, 8)
    What browser do you use? (Internet Explorer, Firefox, Chrome, Opera, Safari)
    Are you seeing any error messages?
    Can you provide screenshots of the error messages (if applicable)?

  • TS3276 Hello I need help with my mail app

    Hello
    I have bin trying to set up an email but I keep getting my "outgoing server" password rejected. I know I am
    not putting in the wrong information by surity.
    Could someone please help me out with this issue.
    I am running OSX version 10.7.2
    Kind Regards
    Zayne

    You probably won't like this suggestion, but I suggest you reinstall Lion.
    First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

  • Hello I need help please with my account apple I'd

    Hello
    I forgot the security questions in my apple id and I can not download apps
    without it I tried to be helped support what is listed on the page and do not
    have the option below and click the blue reset security questions.
    And I'd like to know how I can reset it?
    Thanks

    The Three Best Alternatives for Security Questions and Rescue Mail
         1.  Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
         2.  Call Apple Support in your country: Customer Service: Contact Apple support.
         3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Maybe you are looking for

  • ISight, other person CAN listen but CAN'T see me on Video-Conference online

    My iSight is recognized by Skype, iChat, etc.. But not by Wengomeeting Video-Conference (free chatting online with NO applications and NO downloads). The other person can hear me but can NOT see me. The other person is using a PC. Can anyone help??

  • How do i fix VFP Security.vi error

    hello, In Project Explorer window, i made a library and then created a shared variable. when i clicked on ok button after configuring the variable in shared variable properties window, i got this error whose snapshot has been attached. can anyone tel

  • Datagrid result value

    Hi all, I have a datagrid pulling data from SQL... Data looks like ID          Michigan_Produce      Item 1           F                               Tea 2           T                               Apples 3           T                               C

  • Where is wireframe view mode in Motion 5?

    Am I missing something, or is there no way to view, like in Motion 4 or FCP 7, a way to view and manipulate objects in wireframe view.  That way complex actions can be tweaked and viewed back in real time, without the heavy rendering. Maybe I just ca

  • Is there really still only one range key for partitions?

    Hi All, I had need to look up the manual on partitioning functions.  The manual reads like there is still only one field available to define as the partition key with left and right for placement. Am I reading this right? That MSFT have not yet enabl