Hello, I upgraded to 10.6.8 and now Parallels 4.0 will not work? Can anyone help?

Hi, upgraded macbook pro to 10.6.8 and not I cannot get Paralles 4.0 to work? Any suggestion and help would be Great!
Thanks in advance,
JSKnox11

Might be a good question for Parallels support
http://www.parallels.com/support/free/

Similar Messages

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • Hello,  I have  upgraded my laptop to lion,  from Snow Leopard,  but now my Music Pad Pro,  program will not work ,   can anyone help?  Thank you.

    Hello,  I upgraded my laptop from Snow Leopard to lion,  unfortunately I have a  2 music programs that no longer work.  one is called the Music PadPro,   which is now gone bankrupt,  can anyone help?.   I was talking to the Apple Store earlier and they said if I upgrade to the mountain lion it may help but I'm not so sure,
    kind regards
    Nigel

    There's no reason that upgrading from Lion to Mountain Lion would make this application work.  I've looked up Music PadPro.  I don't know much about it, but it looks pretty old.  Here are the requirements:
    Macintosh G4 or higher processor running Mac OS X Version 10.2.6 (minimum),
    Mac OS X Version 10.3.2 (recommended), or Mac OS X Version 10.4.2.
    Looking at that, I would guess that the application would require a PowerPC processor.  After the release of the Intel machines back in 2006, Apple included something called Rosetta within OS X.  This allowed programs developed for the older architecture (PowerPC) to run on the newer Intel machines.  The reason for this was to give developers some time to upgrade their applications to run natively on Intel processors.  It was only with the introduction of Lion that Apple pulled Rosetta from their OS.  They had basically given developers about five years to upgrade their applications.  Unfortunately, in your case, the developer went belly up.  You can always install an older version of the OS on either a separate partition or an external drive and you can run your program from there.

  • I just upgraded my eMac to Leopard and now my Mail application will not work.

    It will start to load, but I never get a mail window and it won't accept a new account and will not "Quit" unless I "Force Quit" it.

    It may be helpful to also ask in the Leopard "Mail and Address Book" sub-forum here:
    Mail and Address book (22,773)

  • I did a clean install of snow Leopard and now my iWork 09 will not work. does anyone one know where I can download the version for snow Leopard?

    I did a clean install of Snow Leopard and now when I reloaded iWork 09 from my timemachine it will not open anything. any ideas.

    iWork '09 is still available from the likes of Amazon.
    Your experience is why I never trusted downloaded versions when there's a physical DVD available.
    It may be possible to reactivate with your code, but I can't advise you as to how.

  • TS1702 Just upgraded to the latest iTunes and iPhoto and now cannot change photos on my iPad, can anyone help please?

    Just upgraded to the latest iTunes and iPhoto and now cannot change photos on my iPad, can anyone help please?

    Try one or more of the following:
    > Restart Your Computer
    > Uninstall and Reinstall iTunes
    > Reset iPod (nothing will get deleted)
    > Look in My Computer (Windows 98, XP) OR Computer (Windows Vista or 7) and see if your iPod is in there.
    In some cases (and this happened to me before) plug your iPod in and out your computer a few times. It should get it going. If not, then I strongly recommend starting your computer.

  • I updated to java 7 and now my yahoo games will not work, how do i fix this?

    i updated to java 7 and now my yahoo games will not work, how do I fix this?

    kathieaross,
    click on the Java pane in System Preferences. When the Java Control Panel window opens, click on the Security tab, and set your Security Level to Medium — that will allow “untrusted” applications (i.e. those without certificates from a trusted authority) to run. Press the Apply button in the lower-right corner to confirm the change, then press the OK button to close the window.
    Apparently your Yahoo! card games don’t have certificates associated with them, which is why the default security setting of Java SE 7 Update 51 didn’t allow them to run.

  • I installed Lion and now my MS office will not work, is there a way to revert back my original software?

    I installed Lion and now my MS office will not work, is there a way to revert back my original software?

    Back to Snow Leopard from Lion install method
    Read and print out these instructions, your computer is going to be offline and you wil be cutoff from help until your machine is restored.
    Clear the Desktop, Downloads and Trash of anything you wish to keep by placing their files in the respective Documents, Music, Pictures, Movie folders.
    If you have a TimeMachine drive, update it and disconnect for the duration of this restore time. It will be your second backup system and will have to be wiped and setup again after successfully going back to Snow Leopard if it was connected to the OS X 10.7 boot drive. If it wasn't, then leave it disconnected without updating to Lion.
    Backup ALL your Users folders (Documents, Pictures, Movies, Music etc) manually (drag and drop methods) to a (not TimeMachine) external powered drive (HFS+ journaled formatted in Disk Utility) and disconnect, your going to be wiping the entire disk of ALL DATA. (warning, everything will be gone and not recovered)
    Here we go!
    Hold c and boot off the 10.6 installer disk that comes with your computer and second screen in just STOP.
    Look at the Utilities Menu for Disk Utility.
    On the left is the name of your hard drive maker, click it and Erase (format HFS+ Journaled), give it the same name as before, and click Erase...
    This should wipe the drive of ALL partitions (GUID, OS X and 10.7 Recovery, Windows if present)
    When it's done, quit and install OS X 10.6. Then install all your programs from fresh sources and validate/update.
    When you setup a first account, use the same user name as before, this way you can simply drag and drop the content of your previous Users folders from the external drive right back into the new Users folders and everything should work peachy. Links in iTunes to music, playlists and iPhoto links especially.
    Update OS X to 10.6.8 using the Combo Update for best results.
    http://support.apple.com/kb/DL1399
    (Note: If your original machine had 10.5 and you want the free iLife that comes with the disks with the computer, then you'll have to install 10.5 first using the same c boot/erase/format methods as above, then update to 10.6 via the disk, then Combo Update 10.6.8)
    Final step optional but highly receommended.
    A lot of people use a Carbon Copy Clone of their boot drive to a HFS+Journaled external drive as a "hold the option key" bootable backup in case something goes wrong with their boot drive or need to restore to a previous OS X version..  (in addition to TimeMachine drive for more immediate backups.)
    It's not advised to have a Bootable Clone and a TimeMachine partition on the same external drive, as two drives gives hardware protection in case one fails.

  • Cableone innstalled a new server and now my thunderbird email will not work. What do I do now?

    Cableone, our internet provider, has changed from a Google server to their own server and now my Thunderbird email will not work. They have directions listed to make it work, but this does not work. I have also contacted Cableone's technical support and they say because thunderbird is not their system they have no responsibility to make it work. I prefer to use Thunderbird for my email - how can I make it work? Also, I have tried the Thunderbird 'Automatic Account Configuration' help and it does not work.

    Ask your less than helpful provider for the server settings and setup the new account up manually.
    You want to know IMAP or POP and the name of the server. The port number and if it uses SSL/TLS security.
    You need the same info for the SMTP server for outbound mail.

  • I Installed Lion and now my USB modem will not work to send a PDF fax? Do I need a new USB modem to send faxes or is there a software update that I need?

    I Installed Lion and now my USB modem will not work to send a PDF fax? Do I need a new USB modem to send faxes or is there a software update that I need? Also can I change the picture of the login screen? That grey mat looks ugly!

    As posted by Ham on July 29 @ 9pm on this thread <https://discussions.apple.com/message/15786976#15786976>.
    Official statement from Apple:
    http://support.apple.com/kb/ht3152

  • HT1338 I downloaded upgrade to 10.9 and now I  have lost my Safari.  Can anyone help?

    I have downloaded upgrade to 10.9 and now I have lostmy Safari.  Can anyone help me get it back?

    Hi, yes the application still show up there. My problem is still there, now I noticed I have a ? mark where my I Photo used to be.
    Message was edited by: ladibug42

  • I upgraded to OS X10.9.4 and now my Cannon scanner will not work. I downloaded the new driver and still no luck.

    I upgraded to OS X10.9.4 and now my Cannon MX 860 scanner will not work. The printer works. I downloaded the new driver and still no luck. Please help!

    Open Print & Scan preferences. Select the printer in the sidebar list and click on the Delete [-] button. CTRL- or RIGHT-click in the sidebar area and select Reset Print System from the context menu. Re-Add the printer by clicking on the Add [+] button, select your printer from the little browser that opens, select the proper driver if it isn't set automatically, then click on the Add button. See if it now works.
    Oh, be sure you install the new driver you downloaded.
    BTW, you don't have a PowerMac as shown in your profile. PowerMacs were tower machines that ran PPC processors, not Intel processors. You really should correct that information in your profile.

  • I tried to sync my phone with itunes last night using my fiance's itunes account now my phone turns on you see the apple logo then it shows the itunes hook up then it will shut itself off i have tried the master reset and it will not work can someone help

    i can not seem to figure out why my phone will not turn on i have tried the master reset plugging it into a computer and the wall charger it does not seem to be doing anything can anyone help please

    you have to restore the device via itunes

  • Just upgraded to 10.8.2 and now RUSE via Steam does not work

    Now that I have upgraded to 10.8.2, the video game RUSE (opened via Steam) crashes (everytime, always).  It ran fine from 10.6.8.  Any plans to fix this problem?  Ubisoft blames Apple on their support sites....
    Put another way, did I just pay money and spend all day upgrading my system only to lose accessibility to a bunch of programs?

    Mt. Lion will not run any PPC or 32 bit applications.  If you RUSE fits into one of those categories, you might consider a partition or external HDD with Snow Leopard OS on it so that you can play your game.
    Ciao.

  • Updated the iOS and now my iPhone 4 will not work and shows the usb with an arrow to iTunes. iTunes on my computer does not recognize it and will not sync it!! I hate being with out my iPhone

    I recently updated to the new iOS through my computer with my iPhone 4 pluged in via USB. It has shut down my phone and just shows the iTunes icon with the USB cord to plug in. When I try to sync my phone with the computer iTunes does not recognize it!! So now my iPhone is useless and I really need it back to working order!! Please help......Hilda

    Hello Hilda Louise
    Start with the article below to get your iPhone to be recognized in iTunes again. Then you will probably need to restore it to get it back up and running.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    -Norm G.

Maybe you are looking for

  • How to upload and overwrite a file from a dynamic list

    I need to come up with a way to upload and overwrite and existing image file from a dynamically generated list. For instance, there would be a drop-down select box with Company A, Company B, Company C, etc. and when the user selects one of them it sh

  • BAPI for GR (goods Reciept) / IR (invoice Reciept)

    Hi, please tell me the BAPI for GR / IR to upload the Data into SAP. Thanks & Regards Raghunath.S

  • Searching Text in Contact Notes Field

    Hi, I have been a Windows Phone user all along. I am interested in switching over to Nokia. I am looking for one basic requirement of being able to search through the Contacts Field for any text. I use MS Outlook and store lot of text in the Notes Fi

  • Automatic update

    Hello, I have carriedforward the all the g/l balances into the system. But when i am making any entry in to 31st March, 2009 of any g/l e.g. Epx A/c Dr. 1000, Cash A/c Cr. 1000. At that time system is updating the balance for 31st March,2009 but that

  • OSX 10.8.2 with Server App - Where is mail stored

    I have OSX 10.8.2 with the Server App installed. When I first started using the server, I did not have Mail services turned on.  I was able to get all emails from the server (for example whenever cron jobs run) at the local users mail folder.  For ex