Hello! I would like to know about unlock my iphone 4? IMEI *** Serial number 87******A4T And what operator it is locked?

Hello! I would like to know about unlock my iphone 4? IMEI **** Serial number 87******A4T And what operator it is locked?
<Edited By Host>

I don't know if they have email but you can start here  http://www.apple.com/support/contact/

Similar Messages

  • Hi, I am planning a trip to South Africa (I live in Canada) and would like to know if I'll be able to use my Ipad there and what do I need to do to be able to have wi-fi or 4g access?  Anybody can help me?

    Hi,
    I am planning a trip to South Africa in Nov/Dec.  I live in Winnipeg Canada and own an Ipad wi-fi cellular.  I would like to know if it is easy once in South Africa to use my device the way it is (i.e. with its existing SIM card etc).  Or do I need to acquire a different SIM card?  Also in order not to pay a fortune for the service is it better to acquire if needed a SIM card only once there?  Also if I need a different SIM card where does one go to get one in South Africa?   I have never travelled anywhere other than across Canada with my ipad (I am a fairly recent owner of such a device) and could use some help as to the best way to be able to use my machine in South Africa safely efficiently and at a reasonable cost. 
    Any advice would be appreciated.
    Thank you

    Also in order not to pay a fortune for the service is it better to acquire if needed a SIM card only once there?
    Check with your carrier about roaming charges.  They are usually prohibitive.  Best to get a local SIM.

  • I would like to know about the iphone 5 unlocked

    I would like to know about the iphone 5 unlocked
    Dose it support lte 1800 ghz gsm
    Coz i am moving to kuwait and their lte provider is for gsm 1800
    Thank u

    You should be fine based on this...
    http://www.apple.com/iphone/LTE/

  • A few days ago i bought the macbook pro in a Providence. In late Summer i will come back to my Country - Ukraine. I would like to know about a tax for my laptop. Can i return tax? Through the TAX FREE or return in airport? What should i do?

    A few days ago i bought the macbook pro in a Providence. In late Summer i will come back to my Country - Ukraine. I would like to know about a tax for my
    laptop. Can i return tax? Through the TAX FREE or return in airport? What should i do?

    You need to talk with the tax authorities in the countries to which you traveled and that of your home country. We are all end-users liek you and not Apple agents.

  • I need to upgrade memory slots on my Mac mid 2010 up to 4 GB module which is currently 2GB with two different 1GB memory  slots.Is it compatible and would like to know about the cost?

    I need to upgrade memory slots on my Mac mid 2010 up to 4 GB module which is currently 2GB with two different 1GB memory  slots.Is it compatible and would like to know about the cost?

    this sub forum is about running windows on macs maybe you should try
    https://discussions.apple.com/community/notebooks/macbook

  • Hello, I would like to know how to transfer one of my two "membership" to an other computer because I just bought a new Mac.... ? Or how to cancel it on my old laptop so I can activate it on my new computer. Thanks a lot !

    Hello, I would like to know how to transfer one of my two "membership" to an other computer because I just bought a new Mac.... ? Or how to cancel it on my old laptop so I can activate it on my new computer. Thanks a lot !

    Hi Virginie,
    You need to go under the help menu option and sign out from Muse and then install it on the other computer that you want using the creative cloud desktop app.
    - Abhishek Maurya

  • Hello, I would like to know how to add or delete single cell in numbers.

    Hello, I would like to know how to add or delete single cell in numbers.

    If by delete you really mean clear the contents of a cell, then just click once on the cell and hit the 'delete' button.
    Before:
    After hitting delete button:
    In some circumstances you can actually delete one cell.
    For example here, I make this choice:
    Resulting in this:
    So it's not strictly true that Numbers does not delete one cell, ever.  It can if you have a one-column table. 
    So never say never or not ever! Enough pedantry for today!
    SG

  • Hello i would like to know if you have apple shop in birmigham and i want to tell me the cost of iphone 4s because here in your shop i found it 199$ and it is too cheap

    hello i would like to know if you have apple shop in birmigham and i want to tell me the cost of iphone 4s because here in your shop i found it 199$ and it is too cheap

    We're not Apple here, just your fellow users. And you can look this all up yourself:
    http://store.apple.com/uk
    http://www.apple.com/uk/retail/
    A price of $199 would be in the US and would be subsidized by the cell carrier, requiring a two-year contract with them.
    Regards.

  • HT204266 hello i would like to know why my gnome village app as stop working since ihave done a up date to ios6 on my ipod touch

    hello I would like to know why my gnome village app as stop working since I have done a software up date to a ico6 on my ipod touch

    iOS: Troubleshooting applications purchased from the App Store
    Have youwent to the developer's site?

  • I would like to know about the subtitles of movies...

    Hi!
    I'm from Greece an i would like to know about the subtitles of movies.
    Specially, how i can know that the movie i would like to buy or rent has greek subtitles?
    Thank you in advance

    I don't think there's a lot of technical information in those specs.  And most of these questions aren't straight forward.
    Easiest first, the color temp is around 5500-6000K, a little cooler than sunlight and will vary depending on power.
    The flash duration is a bit more vague and depends on when you draw the line (consider it to be off).  It can change the specs significantly.  The full power spec from Canon puts it at about 1/800 for the 580exII, but anyone who has tried to freeze motion at full power will tell you that's false.  I find it to be more like 1/200.  You can losely extrapolate the lower power times as flashes simply double duration to double power.
    Actually, I found this website that has some info on the 580II durations, which should get you in the ballpark for the 600.
    http://speedlights.net/2011/04/18/canon-speedlite-580ex-ii-flash-review/
    And David Hobby had a great article on it at Strobist:
    http://strobist.blogspot.com/2010/06/rise-and-fall-of-machines-understanding.html
    There's even more technical discussions you can dig up if interested.

  • I would like to know about repair full request.

    i would like to know about repair full request.

    Check the following :
    Repair full request
    Delta loading not possible if FULL requests already available in ODS from same datasource & souce system combination, In order to delta's FULL requests should be changed to Repair FULL full requests. Then system allows Deltas.
    Repair Full Request

  • I would like to know about conversion exits.

    i would like to know about conversion exits.

    Hi,
    Under Domain of a data element of a field, Output Characterestics field 'Convers. routine' is used to create conversion routines, system will do the data changes with in these routines while storing the data into table and retriving the data from table.
    Ex: if coversion routine is defined as 'ALPHA' for a standard domain , with this value system will create two function modules.
    CONVERSION_EXIT_ALPHA_INPUT
    CONVERSION_EXIT_ALPHA_OUTPUT
    you can also create your own conversion routines by defining the value in this field. i have defined conversion routine to convert NUMC type data to DEC type data with 'ZCNV'.system will generate two FM's. you need to write the code in those FM's according to your logic.
    see the code for this :
    CONVERSION_EXIT_ZCNV_INPUT
    FUNCTION CONVERSION_EXIT_ZCNV_INPUT.
    ""Local interface:
    *" IMPORTING
    *" VALUE(INPUT)
    *" EXPORTING
    *" VALUE(OUTPUT)
    DATA : ws_output type numc10.
    ws_output = input.
    output = ws_output.
    ENDFUNCTION.
    CONVERSION_EXIT_ZCNV_OUTPUT
    FUNCTION CONVERSION_EXIT_ZCNV_OUTPUT.
    ""Local interface:
    *" IMPORTING
    *" REFERENCE(INPUT)
    *" EXPORTING
    *" REFERENCE(OUTPUT)
    data : ws_value type dec12.
    ws_value = input.
    WRITE: ws_value TO output DECIMALS 0.
    ENDFUNCTION.
    Thanks & Regards,
       Sunil

  • I would like to know about transactional infocube.

    i would like to know about transactional infocube.

    Hi satish pattanayak,
    Transactional InfoCubes differ from Basic InfoCubes in their ability to support parallel write accesses. Basic InfoCubes are technically optimized for read accesses to the detriment of write accesses.
    Use
    Transactional InfoCubes are used in connection with the entry of planning data. See also Overview of Planning with BW-BPS. The data from this kind of InfoCube is accessed transactionally, meaning data is written to the InfoCube (possibly by several users at the same time). Basic InfoCubes are not suitable for this. You should use Basic InfoCubes for read-only access (for example, when reading reference data).
    transactional infocubes can be filled with data using two different methods: using the transaction of BW-BPS to enter planning data and using BW staging, whereas planning data then cannot be loaded simultaneously.
    Anyway, the data from this kind of infocube is accessed transactionally, meaning data is written to the infocube (possibly by several users at the same time); basic infocubes are not suitable for this. I think this is the only proper use of this type of cube...
    We have an option to switch the Tranasaction cube such as "Loding allowed and Planning not allowed" and "Planning allowed and loading not allowed".
    please check these links,
    http://help.sap.com/saphelp_nw04/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm
    function module to read and write to a transactional infocube
    read and write to transactional infocube
    read and write to a transactional infocube
    Thanks,
    kiran.

  • I would  like to know about structure,cell editor .

    i would  like to know about structure,cell editor .

    Hi satish ,
    structure is used to creat a set of rows and calumns values.
    for example,
    if you palce char1 in rows and key1 and key 2 in coloums ,
    if you want to reuse these you can place the selection in structures and can reuse making them as global structures.
    regarding cell defination once you have two active structures i.e., one characteristic structure and key figure structure,
    than you can get the "cell editor in menu bar of Query designer next "table" option.
    Just go throw the below description.
    cell defination will be activated once you have two structures.
    if you want use the same characteristic in two structures, you can do that one in cell.
    Just go throw with below description.
    You can use any cell that you define in a formula. If you want to reuse the value from the implicit, generic cell definition that is automatically created at the intersection of the two structural components of a query, select this cell in the Cell screen area and, using the secondary mouse button, choose New Cell Reference. A description taken from the two structural components now automatically appears in the cell. The symbol shows you that a cell reference exists for this exception cell. Now you can reference this cell. You can continue to use the implicit cell definition and do not have to manually generate this value using a new selection.
    Functions of explicitly defined cells:
    Select a defined cell and choose the required function from the context menu (secondary mouse button).
    &#9679; Edit
    &#9679; Cut
    &#9679; Copy
    &#9679; Paste
    &#9679; Remove
    &#9679; Where-Used List
    Before you delete a cell, you can check for the formulas in which the defined cell is used in the where-used list.
    You reach the properties of a defined cell by selecting the defined cell. In the Properties screen area you can also make changes such as:
    &#9679; Changing the description of the cell
    &#9679; Changing the highlighting of the cell
    &#9679; Hiding the cell ( if you do not want to see the values of the cell)
    Help cells
    In the Help Cells area you can define additional cells for help selections or help formulas. You can use the functions New Selection and New Formula in the context menu to define help cells that are not displayed in the query to serve only as objects for help selections and help formulas.
    For example, you can define an invoice in a help cell and use this in a “real” cell to calculate a duplicated invoice.
    a. Using the secondary mouse button, click on the empty cell next to Help Cells to reach the context menu. From here, choose New Selection.
    b.Use Drag&Drop to drag the Invoice key figure into the right-hand Details of the Selection area.
    c. Enter a description.
    d. Choose OK. The cell contains the description of the selection. The symbol shows you that a selection exists for this exception cell.
    e. Now choose New Formula from the context menu of the required cell of the query. The new formula that is not yet defined appears in the cell.
    f. Select the new formula and choose Edit from the context menu.
    g. Use Drag&Drop to drag the cell you have just defined, which you can find in the Available Operands window under Cells, into the Detail View window. Click on the button twice.
    h. Enter a description.
    i. Choose OK. The cell contains the description of the formula. The symbol shows you that a formula exists for this exception cell.
    Result
    You have defined one or more exception cells for a query.
    Regards,
    shailaja

  • I would like to know about MIDI,

    I would like to know about MIDI,
    Are there information or code?

    honestly, i didnt know anything at all about programming MIDI and i learned
    it in a day (well enough to make a software synth for my usb keystation in one night).
    the java docs and some simple googling pretty much covered all the bases.

Maybe you are looking for

  • OSX 10.9.5  Edge Animate v. 2014 1.1 How do I put an object into a div in this version?

    The lesson says to go to Modify>group element into div, but this version just says Modify>Group Elements, there is no mention of div. 

  • Adobe Acrobat 9 Pro - Form Wizard isn't detecting form fields?

    Hi there, I've been scouring various forums, blogs, etc. to find an answer to my problem, and have yet to be successful.  Here it is: I've created a form in Illustrator CS5 using the rectangle shape tool to indicate form fields.  I need users to be a

  • Want to buy Aperture as a gift from app store.....

    I already own aperture and would like to purchase it as a gift for someone else.  When I find it on the app store, there is no "gift this app" option from the drop down menu next to the price.  I am aware I could just go buy an itunes gift card, but

  • Java.io.notSerializableException:weblogic.jdbc.pool.Connection

    Hello,           In my servelts only sometime I get this exception. I am using WLS7.0 jDK           1.3.1(the one which comes with WLS7.0). I am using Java Beans which are all           serializable.(I have declared that the classes implements Serili

  • WRT300N V2 pptp error

    Hi. I can't correct setup WRT300N V.2 for connect to ISP VPN Server. I obtain IP address from ISP by DHCP (some think like 10.15.28.xxx) ISP VPN IP - is 10.15.0.x How correct setup this parameter in WTR300N. I can't how setup DHCP address if I select