Hello .. Installation problems.

Hello.. I just purchased Photoshop CC. I am an elements 11 user. When I went to download it kept asking open aam files with application. This in itself is confusing. However finally leaned, chose the right creative cloud and begain. Immediately an adobe update available message appeared. Chose YES, installed part and then said. "update failed." Now the DOWNLOAD button doesnt work at all. You would think that a company taking so much trouble to simplify its programs would have an easier way to handle downloads!!
How do I download photoshop CC
How do I download photoshop CS6 which I understand is included!
Thanks
<Removed by Moderator>

run the Creative Cloud Cleaner Tool, try again. To download older versions, simply select them on the CC web page under the application icon.
Mylenium

Similar Messages

Installation Problem on Win8

Hello all
I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
Thank you guys for your support.
Installation Logs:
java_install.log - Pastebin.com
java_install_reg.log - Pastebin.com
JavaDeployReg.log - Pastebin.com

Hi people!
I have two problems with nokia suite...
first of all I can't install it at my windows 8.1, I receive the message attached...
Second,
in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
can somebody help me?
Attachments:
mokiasuit.png ‏13 KB

Xp_logininfo Installation problem

Hello gurus,
I'm facing the same problem as described in this link:
Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
the error I get is similiar:
<i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
but I just don't get how to solve it.
-I've tried to use the profiler but didn't find any information that will help me to solve.
-One of the guys wrote to add "logon rights" to the user ... what does it mean ?
Please advice,
Dimitry Haritonov

Hi sven,
Thank you very much for the quick and direct answer.
The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
Best regards,
Dimitry Haritonov

Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5

hello support,
i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1          oracle localhost.localdomain localhost
::1          localhost6.localdomain6 localhost6
is this ok? what can I do to bring the database-installation to success?
Thank's for help ;-)
Edited by: user5782904 on 09.05.2010 14:06

Here I paste you the configuration of my latest linux box which has a similar environment like yours.
# hostname
vmrhel6032.quist.ch
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032.quist.ch
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
# hostname
vmrhel6032
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Otherwise use the first example and don't forget to restart your server resp. the network service. ;)

Satellite L750 - drivers installation problem

Hello good people of the internet,
I have a problem with drivers' updates/installation on my Satellite L750-1E3, Windows 7-64 bit.
When I launch the installer, it decompresses, telling me it will launch afterwards, but then the window closes and nothing further happens.
I've read about the same problem one person here had with the L855-10P series but, maybe because I'm a girl or maybe because I'm not a native English speaker, I didn't uderstand what to do...
I actually have problem with more things.
My webcam stopped working, when I try to launch it I get the error message that tells me "the initialization went wrong, restart your webcam or computer".
So I tried to reinstall the driver but the problem I described above appeared.
The same driver installation problem appeared when Tempro told me to update my blu-ray driver (I download all the drivers from eu.computers.toshiba-europe.com).
And the last one, for about a month there are problems with the sound on my notebook.
First cracking of sound and then it stops working completely and I have to restart the computer.
Again, I tried to reinstall the sound drivers.
There are two drivers on the Toshiba site, one of them reinstalled just fine but the other one (nvidia, I think) had the same problem as the other drivers.
Someone please tell me what to do, because I am becaoming really desperate and I seriously considered throwing my notebook out of the window.
Thank you

Usually the HDD recovery is the easiest to get the notebooks factory settings and to get it running again.
>My webcam stopped working, when I try to launch it I get the error message that tells me "the initialization went wrong, restart your webcam or computer". So I tried to reinstall the driver but the problem I described above appeared..
Its interesting to know if the webcam or an unknown imagine device (probably webcam) appear in device manager. Please check this.
If the webcam isnt listed there, you should check if the webcam is enabled in BIOS.
To access the BIOS press F2. Then go to Advanced tab -> System configuration -> webcam
If the webcam is enabled in BIOS but still not recognized and not listed in device manager, then you should recover the notebook to factory setting to check if the webcam module isnt faulty.
>The same driver installation problem appeared when Tempro told me to update my blu-ray driver (I download all the drivers from eu.computers.toshiba-europe.com).
The Blu-ray player update works only for notebook equipped with blu-ray drive. If your notebook does not support blu-ray drive

Update installation Problems: Code U44M1P7 in Extension Manger 6.0.4 and Illustrator and PS CS6

Hello,
After the installation of several updates I find several errors in the error log:
" Update installation Problems: Code U44M1P7 in Extension Manger 6.0.4 and Illustrator and PS CS6"
I use a Mac Book Pro with Retina and MAC OSX 10.7.5.
What is the problem and how can I solve it?
Best regards
Frank

Follow the instruction given at the following link:
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Oraview.vrf(0) is missing -- installation problem

Hello:
I had a problem when I was trying to install Oracle 8.0.5 on my
RedHat 6.0 machine. Please help me if you happen to know the
solution. It seemed that everything was OK at the first stage of
my installation. After I set the environment variables, I ran the
orainst to install new product without creating database. After I
got the success result, I ran the "glibcpatch" script. I also got
the message saying "Applied glibc patch for Oracle 8.0.5.
successfully." Well, after I ran the orainst again to try to
create database objects, I got the problem. In the install
screen, I select "Oracle 8 Standard RDBMS 8.0.5.0.0". After the
installation ran for a while, I got this message:
Oraview.vrf(0): FILE_NOT_FOUND while verifying oraview.
(No such file or directory.)
I tried several times to install again from the very beginning.
But each time it stopped there. I got the same results. Did
anybody out there have the same problem before? If you know how
to solve this problems, please help me. Your help is greatly
appreciated. Thanks in advance.
Warren
null

Phan Anh Tran (guest) wrote:
: Hi all,
: I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
: However, I am running into a couple of post-installation
: problems.
: 1. root.sh (sucessfully ran).
: 2. glibc patch (successfuly ran). There were a few errors on
the
: screen with the "mv" commands (file does not exist). Is tha
: alright?
: 3. catrep.sql (problem). This is where I have a problem.
: I ran dbstart as oracle805 (installation account), but I have
no
: idea whether or not I really started the database. ps -aux did
: not yield any clue.
: I also tried svrmgrl and "startup", but the file "initXXX.ora"
: did not exist, so I copied the existing "init.ora" to
: "initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log
gave
: me the following:
: ORA-00202: controlfile: 'ora_control1'
: ORA-27037: unable to obtain file status
: So, in other words, I have no idea whether or not I have
: successfully installed Oracle. All insights are greatly
: appreciated.
: Thanks a bunch...
: Anh
Hei !
I also did this fault :-( See this webpage - it's excellent
and describes everything.
http://jordan.fortwayne.com/oracle/rh6x.html
null

Software Installation Problems with Media Source and Nomad Explo

Hello Creative Users,
recently I had to reinstall my operating system on the PC. I have an IBM Thinkpad R30 with a Sitecom USB2.0 pccard. I am running WinXP Pro SP2 with all latest updates.
I have a Nomad Jukebox Zen Xtra with Firmware .20.08 and an update harddri've of 80GB.
As long as I was running the software on my previous installation everything worked fine.
I installed the driver .26.02. This recognized the Jukebox. Musicmatch is able to communicate to the Jukebox and recognizes all files on it.
When I installed Nomad Explorer I got an error ctregserv failed because ctin...dll is not found.
When I tried to install Media Source from the original disk it showed an error after 30% Media Source not found. Install Media Source before continuing.
This is what I received now with all verisons of Media Source and Noamd Explorer incl. .30.0.
Can someone help me as synchronizing with Musicmatch is a pain.
Thanks
Rolf

Hi everyone,
as I saw many questions regarding installation problems with Mediasource or Nomad Explorer
in this forum I will answer my own question right here. I was pointed to the answer by a friend with a similar problem on some other software.
When trying to install the Creative software under WinXP SP2 I happens that the registration does not work. the reason are missing write attributes to the keys for
Creative software. To correct that go to: Start, Run and enter regedit. Hit ok and you are in the registration editor.
Find the Creative location unde HKEYS_SOFTWARE. Click right mouse button and choose
properties.
Check full access for your user as well the system user. click on advanced and mark both all the users you want to install from. Check the lower box below the user window sayin something about roghts being propagetd to lower folders etc. Cklick conform and ok, click confirm on previous screen and close regedit.
Now you should be ok and able to install.
Regards
Rolf

Solution to common Windows 7 Xfi Elite Pro installation problem

Solution to common Windows 7 Xfi Elite Pro installation problems Hello,? I have just solved what I understand to be a common problem when upgrading a machine with an Xfi Elite Pro from XP to 64 bit Windows 7. Apparently the console control software for the "older" PCI Soundblaster cards for Win7 isn't done yet. If you've installed Win 7, updated the product identification module and run the new driver that you can find easily on Creative's support site and you still have no sound, try going to the Control Panel in windows. Switch the display to the "small icons" option and select "sounds".
Choose the "playback" tab. You should find a list of possible sound output devices that exist on your machine. You need to highlight the Xfi on that list and then click the "Set as default" button at the bottom of the screen. That should do it for you.
It did it for me.

C The 'solution' you provided only touches a very small fraction of the problems with Creative sound cards. Only very unexperienced users may not control which sound card is choosen by their operating system. Many of us work with PCs for decades, being used to modify the registry and so on. The drivers of Creative are of an unexcusable low quality.

Installation problem: "Java Security Configuration Asistant" failed

Hello, does anybody can help for the following installation problem of Oracle Enterprise Manager 10g:
During installation, when I come to the step "Configuration Asistants", the "Java Security Configuration Asistant" can not pass, it always failed even after retry. Pls help!!!

I'm having the same problem installing on W2K, what I discovered is that it's unable to start listener, I hat to start it manually but it still won't end tihs task.
I also have a 9i Client / Manager software installed in a 9i Home which disapeared from home selector.
If I try to deinstall OEM10G it'll just get to a 2% advance and stop...
...is this a BETA?

Installation problem on Intel

I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..

I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
C

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Installation problem on RHEL4 ..

Installation problem on RHEL4 (Red Hat Enterprise 4) i have
install start at unzip tar.gz and tar -xf .... now i have run
./installFMS it show
./fmsini: error while loading shared libraries: libstdc++.so.5:
cannot open shar
ed object file: No such file or directory
ERROR: Your are running the Macromedia Flash Media Server
installer
on the wrong platform.
it not support for fedora or anything else?
plz help....

would be nice if someone responded to this.... Macromedia
wouldn't have been this lax in giving a reply :) AND they keep up
with OS updates too :)

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Lightroom 3.2 Installation Problem on Windows 7 64-bit

Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.

Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

Hello .. Installation problems.

Similar Messages

Maybe you are looking for