Hello, is there any calender application which keeps historical data for iPad 2?
hello, is there any calender application which keeps historical data for iPad 2?
The one built-in keeps whatever historical data you sync to it.
Similar Messages
-
I have just purchased a subscription of Acrobat XI Pro, which I installed in my computer a long time ago, when I first tried it. Alas, I cannot open the application, which keeps asking me for a serial number I have not yet received. What the hell is going on?
[discussion moved to Acrobat Installation & Update Issues forum.]
-
Hello, is there any way of having a reboot disk for lion that I'm downloading, like the one I have with snow leopard ?
Once the Lion download is complete quit the installer and follow these directions. The file you need to make a boot disk disappears after you install Lion.
Egg Freckles | Burning A Lion Boot Disc
However, the Lion installation includes a recovery partition. It won't be of help if your entire HD dies but is very handy otherwise. This Knowledge Base article has a lot of good information about Lion's recovery partition.
OS X Lion: About Lion Recovery -
I am using iphone 3gs, I upgraded my i-os to 6.0 from 5.1.1 however I am facing performance issue, along with this all the applications including settings or any other shuts down automatically. Is there any way by which I can use my phone in better way?
No, downgrading from any version of iOS to an earlier version is not supported.
-
I recently bought a macbook and im trying yo sync all my 2600 photos to it but my phone is synced to another computer in another country which i cant access!! Will i loose all my photos or is there any other way of keeping them and uploading to my new mac?????
Hi jonnywilson78!
Here is an article that will instruct you on importing your photos from your iOS device to your new computer:
iOS: Importing personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/ht4083
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Is there any alternative application to the Carbid...
Hi,
Is there any alternative application to the Carbide.ui Theme Edition?
Solved!
Go to Solution.I've tried carbide.ui several times over the years but never stuck with it long enough to get any decent results. The program is aimed at developers and offers total control but that also makes it feel complex.
The creators on those sites are very simplified and aimed at users without any theme creating knowledge at all. As a result you have much less control over your theme. If you are looking to create themes for your own use then they are fine but if you want to create professional quality themes your only option is carbide.ui.
There are guides for working with carbide.ui which you can find by searching google but you will still need to invest a lot of time and effort if you want good results.
Personally I now just stick to using themes created by professionals such as babi, pizero and tehk along with custom wallpapers that I adapt or create myself.
Message Edited by psychomania on 27-May-2009 01:19 PM -
ARE THERE ANY WAYS BY WHICH I CAN FIND THE Appln Servlet Container Memory
ARE THERE ANY WAYS BY WHICH I CAN FIND THE Appln Servlet Container Memory .
You can check out Tomcat memory usage using Tomcat Manger
and clicking server status.
It gives the information like this
Free memory: 489.80 MB Total memory: 508.12 MB Max memory: 1016.12 MB
For specific application stats, i think there are some profilers which u have to search in google. -
Is there any standard report which contain all these fields
is there any standard report which contain all these fields
1. plant
2. material no.
3. profit center
4. movement type
5.g l a/c
6.posting date
we have it in z form one of the job it does is that what all materials entries came to a single gl we can know from it
like we can know what all materials were charged to repair to p and m a/c.
can any one tell where can we find these field in any standard format in sap.
pls send some suggestions.Hello Sanjeev,
I don't think there is an existing standard report with all the information from KE5Z plus material name.
What I would suggest to you is either:
1) Copy the standard KE5Z program (RCOPCA02) to a Z program one and insert the additional field from MAKT table (it would demand ABAP coding and some considerable effort to develop it);
2) Create a Query (SQ01 transaction) by selecting data from GLPCA (table that is used in KE5Z) and MAKT (table that contains the material name by language).
Hope it helps you.
Best Regards,
Daniel. -
can't I get Xcode for leopord for free? or is there any other compiler which supports many languages?
XCode is Apple's official SDE (as in Software Development Environment). It is meant to be used to develop all kinds of full-fledged applications, which are organized as projects. To use it that way, you run the main XCode front end, called appropriately enough Xcode. In the older versions of the product, prior to Lion's v4.3.x, everything was found inside the /Developer folder located at the root of the boot volume. (If you ever move on to Lion, XCode 4 is now an app found in the Applications folder and there is no longer a /Developer folder.)
An alternate way to access the compilers is via command-line mode in Terminal, on traditional Unix fashion. After installing XCode, it will have set up the PATH variable to point to the appropriate directories so that gcc and its ilk are directly accessible. For instance (note that silverflash is the name of my Mac and my userid is macjuan):
silverflash:~ macjuan$ which gcc
/usr/bin/gcc
silverflash:~ macjuan$ gcc -v
Using built-in specs.
Target: i686-apple-darwin11
Configured with: /private/var/tmp/llvmgcc42/llvmgcc42-2336.1~22/src/configure --disable-checking --enable-werror --prefix=/Developer/usr/llvm-gcc-4.2 --mandir=/share/man --enable-languages=c,objc,c++,obj-c++ --program-prefix=llvm- --program-transform-name=/^[cg][^.-]*$/s/$/-4.2/ --with-slibdir=/usr/lib --build=i686-apple-darwin11 --enable-llvm=/private/var/tmp/llvmgcc42/llvmgcc42-2336.1~22/dst-llvmCore/Developer/usr/local --program-prefix=i686-apple-darwin11- --host=x86_64-apple-darwin11 --target=i686-apple-darwin11 --with-gxx-include-dir=/usr/include/c++/4.2.1
Thread model: posix
gcc version 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.1.00)
silverflash:~ macjuan$ gcc --version
i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.1.00)
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -
Is there any standard report which give all information about purchase orde
hi
is there any standard report which give all information about purchase order.
i need following information from Purchase Order.
Vendor No, vendorname, PO No, basic , Excise , insurance , Frieght.
thanks .Hi,
Try following
MC$G PURCHIS: Material Purchase Val Selection
MC$I PURCHIS: Material Purch Qty Selection
Kedar K -
Is there any standard report which give all info about purchase order.
hi
is there any standard report which give all information about purchase order.
i need following information from Purchase Order.
Vendor No, vendorname, PO No, basic Excise insurance Frieght.
Thanks.Hi,
Following are reports for PO list.
ME2C Purchase Orders by Material Group
ME2J Purchase Orders for Project
ME2K Purch. Orders by Account Assignment
ME2L Purchase Orders by Vendor
ME2M Purchase Orders by Material
ME2N Purchase Orders by PO Number
Message was edited by:
Vigneswaran S -
Is there any way by which I can not use Thunar Sys Tray icon?
I am using stalonetray in OpenBox in Arch and when I copy-paste or cut-paste files in Thunar, a sys tray icon pops up. I don't want it to pop up.
Is there any way by which I can make it to not pop up?Trilby wrote:
I haven't used thunar for a while - but I don't remember it ever doing this before. I just verified that it doesn't here (freshly installed thunar, and cut-pasted, copy-pasted, etc, and I didn't get a tray icon.
Are you sure this isn't some other tool, like a clipboard manager? Are their any tooltip popups or menus available on the tray icon and/or what happens when you click the icon?
No. I use only Thunar. When I hover on the icon it says that "1 file operation running" when a copy-paste or cut-paste operation happens and when I left click and right click on it, it shows the copying window of thunar. The icon shows two small yellow folders placed diagonally. It's the same icon that appears on the file operation progress window of Thunar. I don't know whether Numix has anything to do with the specific icon though.
Last edited by chosentorture (2015-01-11 00:13:32) -
Is there any way through which I can stop download of my ABAP programs???
Dear all,
I want to know is there any way through which I can stop download of my ABAP programs so that no one can download or copy my programs without my permission.
Thanks in Advance
Sachin GautamHi again,
1. In that case we cannot do much.
2. However,
we can use
the exit
SEUED001
(fm is EXIT_SAPLS38E_001)
to restrict the program
in edit mode,display mode
etc etc.
depending upon the PROGRAM NAME.
I hope that serves your purpose.
regards,
amit m. -
Is there any default calendar which I can use on my form and report
Hi All,
Is there any default calendar which I can use on date field on my form and report.
just by change its property like double click on date field and property calendar = yes
or any other way.
thanks
mohanhi
create a functions something like this.i hope it helps u.
function call_calender ( f_dtm_set in date default sysdate ) return date is
l_dtm date;
l_list paramlist := get_parameter_list ( 'CALL_CALENDER' );
begin
if
not id_null ( l_list )
then
destroy_parameter_list ( l_list );
end if;
if
trunc ( f_dtm_set ) != trunc ( sysdate ) --> if you call the calendar function with a date, the calendar will change to that date
then
l_list := create_parameter_list ( 'CALL_CALENDER' );
add_parameter ( l_list, 'DTM_SET', text_parameter, to_char ( f_dtm_set, 'dd/mm/yyyy' ) );
end if;
copy ( null, 'global.calender_date' ); --> create a null global
call_form ( 'form_name', no_hide, no_replace, no_query_only, l_list );
if
not id_null ( l_list )
then
destroy_parameter_list ( l_list );
end if;
if
name_in ( 'global.calender_date' ) is not null --> if the global is not null, give the choosen item back
then
l_dtm := to_date ( name_in ( 'global.calender_date' ), 'dd/mm/yyyy' );
end if;
erase ( 'global.calender_date' );
return ( l_dtm );
end;sarah -
Hi,
Archiving Database Schema states that in the tables SessionDetails and Conferences tables, the column 'SessionIdTime'
holds datetime value at which session request is captured by Archiving service.
But, is there any order in which the records are stored in the db?
Say, a session 'S1' starts at 1:00 PM and another session 'S2' starts at 1:05PM. 'S2' ends at 1:10 PM and 'S1' is still on going. I have observed that on ending the session the record is written to DB, so is it possible that details of session S2 is written
in db prior to 'S1'?
Is there any way to query these tables, in the order in which the records are stored?
Thanks and Regards,
ArjabhHi,
You can export records that have been stored in the Lync Server Archiving database with the following cmdlet in the link using Lync server manageshell.
http://technet.microsoft.com/en-us/library/gg398452.aspx
You need to write a SQL query/view or report server report to display the information.
More details:
http://blogs.technet.com/b/dodeitte/archive/2013/06/02/sample-lync-server-archiving-report-available.aspx
For the issue about “is there any order in which the records are stored in the db?” you can post a case to SQL forum and more experts will help to verify the issue.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
Maybe you are looking for
-
Error while addind A/R Creditmemo
hi Experts , while adding A/R Credit memo the document was not getting added and throwing an error as ' reconsilation date must be on or after the last posting date for transaction selected for reconciliation [Message 3821-3]'
-
How can i see my contacts on the itunes?
Hi I have damaged my phone screen and cannot see anything on the phone. Just Synch my phone. How can i view my contacts in windows?
-
How to use airplay do I need additional hardware
Cant see the airplay icon how do I use this I am trying to conect with Logitech UE Air Speaker and iphone 5 ? ipad air sorry if this is silly question but I've never used airplay before so not sure if I need any this else.
-
List versions causing performance problems
We have a List - not Library - List - with about 100 columns (Yes. We know that's a lot and have verified that one Item wraps to two DB rows), none of which is indexed. An InfoPath form is used to enter and view the List Items. Versioning is on for
-
HP Pavilion Entertainment won't start just shows blue screen
HP Pavilion Entertainment won't start just shows blue screen. Sometimes says missing operating system after changing boot order. I have seen error message 303. This happened after I couldn't stop coolncheap popups so I saved everything to another com