Hello - just looking for some guidance. I have MBP running OS X 10.10.2, Acrobat X 10.1.13. The display on MBP is perfect except in Acrobat - where the fonts are jagged not just on the document but also in the menus and dialog boxes. Any ideas how to corr

If anyone can help me, that would be hugely appreciated!

I have the same issue now after downgrading my Flash plugin. I downgraded from 10 to 9 latest because I like using Camino and for some reason Flash 10 doesn't play nice with Camino. But all of a sudden as I use Camino 2b2 for everyday and Safari 3.2 for banking and such, the browser hangs requiring a forced quit when I close it. I've re-installed the browser twice now with all the previous folders, and preferences erased and caches emptied. I even when to re-installing 10.5.6 and it still crashes, it's odd. Maybe 10.5.7 will address this.

Similar Messages

I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?

I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?

Hi Cjroyle,
Thank you for using Apple Support Communities.
From your post I understand that your iPhone will not boot past the Apple logo on the screen. To troubleshoot this issue I'd like you to please follow the steps in the article below.
iOS: Not responding or does not turn on
Take care,
Alex H.

Question: I cannot start my iPhone 4. It just "died". I connected it ti my Mac, but tha Mac doesn´t recognise it. Any ideas how to wake the phone.The battery is fine, I just cannot get it working!

Question: I cannot start my iPhone 4. It just "died". I connected it ti my Mac, but tha Mac doesn´t recognise it. Any ideas how to wake the phone.The battery is fine, I just cannot get it working!

See Here for
Frozen or unresponsive iPhone
Try this first... You will not lose any Data...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
If that does not work... try letting the battery fully drain.
Then Charge for an Hour and try the suggestions again.

Looking for some guidance on how to splice 2 vidoes together in Adobe Elements 13.

Looking for some guidance on how to splice 2 vidoes together in Adobe Elements 13.

ScottWarnerBC
What computer operating system is your Premiere Elements 13 running on?
What do you mean by splice 2 videos together?
a. put them side by side on the Timeline and export them to one file saved to the computer hard drive or burned to disc
or
b. something like the following even before import into any Premiere Elements project
ATR Premiere Elements Troubleshooting: PE12: Seamless File Merging Before Import
If it is "a", then we need to know the properties of those 2 files so that the project settings can be set accordingly.
What is your intended export? Based on the properties of the source media, we can then decide on export settings
to produce a file with properties as close as possible to the source (if that is what you want).
We will be watching for further information.
Thanks.
ATR

Adobe Acrobat Reader XI no longer copies the selection to where I want to insert it in an MSWord document, but only to the top of the page! How fix this?

I have Window 7 Professional SP1.

fouada2 wrote:
Adobe Acrobat Reader XI no longer copies the selection to where I want to insert it in an MSWord document, but only to the top of the page!
I have no idea what this means; can you elaborate?

I cant update my software. It downloads updates , then says, 'an error has occurred and updates have not been installed'. I am now behind 6 months on updates. Any idea how to fix this?

I cant update my software. It downloads updates , then says, 'an error has occurred and updates have not been installed'. I am now behind 6 months on updates. Any idea how to fix this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update. Post the log text, please, not a screenshot.
If there are runs of runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.

HT201412 I have iPhone 4 and phone lately unresponsive, you press application and takes a vile to open and typing is really slow and logy. Any ideas how to fix it?

I have iPhone 4 and phone lately unresponsive, you press application and takes a vile to open and typing is really slow and logy. Any ideas how to fix it?

Basics from the manual are restart, reset, restore.

My call will not end when pushing end sign even when shut down and restarted. any ideas?

call will not end when pushing end sign even when shut down and restarted. any ideas?

Sounds like a major hardware problem.
If no change after restoring your iPhone as a new iPhone or not from your iPhone's backup, there is a hardware problem.

Following the recent iTunes upgrade I am getting two error messages (-42404) and (-50). Any ideas how to rectify?

Using iTunes for the first time since the upgrade I am plagued with error messages - one telling me that a required component is not installed (-42404) and a second that my iTunes store request cannot be completed (-50). I've reset my old iPod as the message tells me but am reluctant to do that on my iPhone and risk loosing content. I've uninstalled and reinstalled iTunes but it's made no difference. Any ideas how to fix please?

Disable your firewall/security software.

Just looking for some advice for a Networking 'noob'

Hey folks,
I manage the post-production workflow for a small agency. We're getting ready to move into a new office space, and we'll be looking to make some upgrades to our video workflow and data management.
At the current time, we have two G5s (PowerPCs) and a new Intel Mac Pro. We may be adding a fourth (or even fifth) workstation. We shoot everything on the DVX (24p DV), but we're also (strongly) considering upgrading to an HD workflow and investing in a few HVX packages so we can have the option of shooting 720p. We will NOT be shooting anything higher than that, (no uncompressed, digibeta, no 1080p, etc.)
Right now, when we need to access media from other computers, we simply use the AppleTalk feature of our internal ethernet and mount the drives remotely. This actually works fairly well, and we usually don't have any issues with latency. But it becomes frustrating at times when we want to search for a particular media file or FCP project file and we can't remember which drive it was stored on. We'd like to have all of our editing workstations be able to access the same media simultaneously in one shared 'Mother Ship.'
I guess my question is: What should we get? Final Cut Server? G-Raid? Xsan?
I'm not really an IT guy, so I can't say I really know the differences between these different options, but any advice you can offer would be most appreciated.
And as for budget, we're prob looking to spend something in the range of $8,000-$10,000 dollars on this new system. (that's NOT including the HVXs, of course.
qp

Ok... here we go, not sure what you are doing except editing DV right now,
but this will work for HDV, DVCPROHD, Uncompressed SD and some ProRes
as long as you have a good Gigabit Router to transfer files. Please consult
a professional if this sounds scary to you.
*Redundant FILE SERVER* for project files, important stuff
1. Install at least 4GB RAM in G5 #1 (max $200)
3. Make sure there are two identical SATA drives in the G5. Install OSX Leopard Server ($499) on 1 drive. Use Carbon Copy Cloner (Free... http://www.bombich.com/software/ccc.html) and clone
the main drive to SATA drive #2 when drive #1 is set up completely. Use drive #2 as backup.
4. Connect CalDigit 2.56TB HDOne External Hard Drive Array (RAID-5) with PCI-X adapter ($2830)
SubTotal: $3600...ish
*Current MacPro* Add unprotected scratch disk for main edit suite
1. Install Sonnet Tempo SATA e4p Serial ATA Host Adapter ($260)
2. Connect Sonnet 2.5TB Fusion D500P eSATA Array System (RAID-0) ($1700)
Subtotal: $2000...ish
*2nd G5* convert to p2 Logging/backup Station
1. Sony BWU-200S Internal 4x Blu-ray Disc Rewritable Drive (599.95)
2. Roxio Toast ($85)
SubTotal: $700
*NEW Intel MacPro* will increase productivity
1. 8 Core 3ghz Intel MacPro ($3600)
Total: Around 9900-10,000
(Buy from PowerMax.com or other out of state vendor to avoid sales tax)
If you want to organize things, then FCS will help. You can install
on G5#2 for 999.00 more. I would focus on hardware first though.

Looking for some guidance on an Internet and Wan failover design

Hey Everyone,
I have a project that has been somewhat dropped my lap. The person who was going to do the project has abruptly bowed out. I'm stuck in a position where I can either find another contractor, or just do the work myself. For sake of saving my company, and putting another notch in my belt, I think I'm just going to do it myself. For background info, I am a CCIE Collaboration. I have held a CCNA in route switch for several years, and have used it extensively. I have done some pretty large networking projects. But I've never done this particular aspect of route switch. I'm hoping someone here can point me to a good location for reference materials or videos.
Here is what I'm looking to do. We have 30 branch offices, with 2 major data centers. Both data centers have a 100mg internet, and a 50mg mpls connection. Today our MPLS comes directly in to a Cisco 3945 router and then uplinks in to our datcenter on a 3750 stacked switch. Our internet connection comes in to a HA pair of ASA 5510's and then also uplinks to our switches. All of our branches come back to the datacenters over the MPLS for their internet services. Today, all of our offices go to our west coast datacenter. The only thing using our east coast datacenters internet is that office itself. I want to achieve two goals:
1) Make all internet connectivity load balance. If one site loses internet, all traffic routes to the other site.
2) If the MPLS is lost, I want the datacenters to reroute traffic through a VPN tunnel between each other
The way I understood it from the person who left the project is that I need to bring the internet connection and the MPLS in to a single router, or pair of clustered routers. That router can then make the patch selection and handle the BGP with our carrier.
Thank you all in advance.

I acually have similar setup at home using a 2611 router and forwarding port ranges to multiple ips on the internal network and it works great! My issue is that I have one dynamic ip assigned by my ISP and eventually I will have to manually change the ip for each nat statement. I wanted to know if there is a way to point to the outside interface instead of using on ip address. I found out that you can use a static nat statment
"ip nat inside source static tcp 10.0.0.2 22 interface fa0/0 22" instead of
"ip nat inside source static tcp 10.0.0.2 22 72.xxx.xxx.85 22 extendable"
but I cannot find how to point my route-map to the interface to fully resolve this dynamic ip change in the future. My config is listed below which works great if you have static ips assigned by your ISP!!! Though I would love some guidance on the dynamic issue if possible. Thanks
~Roman
P.S. ip nat statements work like numbered access lists and have to be in order or it will not work. I found out the hard way!.
interface fa0/0
ip nat outside
interface fa0/1
ip nat inside
interface s1/0
ip nat inside
ip nat inside source list 1 interface fa0/0 overload
ip nat inside source static tcp 10.0.0.2 22 72.xxx.xxx.85 22 extendable
ip nat inside source static 192.168.1.3 72.xxx.xxx.85 route-map DESKTOP extendable
access-list 1 remark NAT OVERLOAD List
access-list 1 permit 10.0.0.0 0.255.255.255
access-list 1 permit 192.168.0.0 0.0.255.255
access-list 1 permit 172.16.0.0 0.15.255.255
access-list 100 remark Desktop computer port-forwarding
access-list 100 permit tcp host 192.168.1.3 3389 any
access-list 100 permit tcp host 192.168.1.3 28960 any
access-list 100 permit udp host 192.168.1.3 range 28960 32000 any
route-map DESKTOP permit 10
match ip address 100

Beginner programmer just looking for some info...

Hey, I've posted a couple questions on here already today. And with those questions I've received a lot of great feed back. And I thank all of you for your help. But here's another question, and actually probably more important for me at this time than my other ones. I've just recently started working with Java a little bit. It is the first programming language I've used (other than picking at QBasic way back when, just messing around as a kid). But now I'm extremely interested in programming and was hoping some of you would be able to help me get started. Pointers, tips, suggestions? How did you all get started? Any good tutorials online that could help me? Good book suggestions? Basically, where should I start? Thanks, again, for all of your help!!!

Any good tutorials online that could help me?http://java.sun.com/docs/books/tutorial/
Basically, where should I start?Well, most of us probably started by taking classes at school and by doing assignments. If you are doing this on you own then you will need to read and create your own assignments. One way to do this is to find a topic that interests you and then attempt to answer questions in this forum on that topic.
For example, I was interested in learning how Swing worked, so I read the Swing tutorial from the link given above. Then, to test my knowledge, I tried answering questions on the Swing forum. If I didn't know the answer outright then I would read the API some more, or search the forum to see if the question has been asked before. The more questions I answer, and the more answers I see from other people help me to increase my knowledge. Slowly I increased my knowledgw and have now fooled some people into thinking that I actually know something about Swing.

HT203167 just bought a new computer and installed itunes. I have de authorized my old computer and authorised my new computer but i cannot find my music lists. Any idea how to access them?

just bought a new computer so I am trying to access my music on itunes but i can't seem to find it. I have de authorized my old computer and installed itunes on my new computer but my music doesn't seem to be there. Any ideas what i'm doing wrong?

Your music and playlissts will only be where you put them.
Have you copied them to your new computer from your old one?

Just looking for some advice at this stage

Hello all, been a while since I posted here... That's cause it's been a while since I've upgraded :D
Anyway, I'm just planning my build now and I want to check up on a few things... I'm going Conroe obviously (E6600) but I'm not decided on which flavour of board I'll go for just yet. Depending on what AMD/ATi pull out of the bag it'll either be the 975X or a P6N SLI (in some form or other). At this point three things are on my mind:
1. I want to go for 4Gb of (matched) RAM on two sticks... anything I need to be aware of regarding 2Gb module compatibility? Any makes to avoid (OCZ seem to be unpopular in that regard).
2. I'd like to move to a SATA optical drive, and issues there? Makes to avoid etc. especially in the case of the 975X as the tested hardware list only seems to include PATA drives.
3. What the recommended Amperage on the 12V line these days? I'm currently looking at the 620W Corsair PSU as a safe bet, other recommendations are welcome though.
Thanks for any advice/opinions offered in advance... hopefully with a bit more info this time I'll be able to avoid trouble shooting posts :D
Gift.

Right so I've done it, two PCs at the spec posted in my sig...
They seem to be working fine, nice and stable but a few little niggles I'd like to sort:
1. Updating the Mobo drivers, live update doesn't seem to like Vista so should I just DL the ones on the mobo main page?
2. Vista seems to behave strangely when it greys out the screen to indicate a UAC box needs attention. It fades in ok on both PCs but seems to flicker off once I'm done with the box in a way that seems to render the graphics weirdly. I wouldn't go so far to describe it as graphical corruption more like a kind of rendering lag... Anyone else noticed this, I've an idea uptodate mobo/gfx drivers might be the problem (I've just gone with the stuff vista DL'ed installed, for me) but otherwise all good games run stably so far (touch wood).
I'm off for a night of installing software :D Deep joy.
Gift.
PS sorry this was late, parts got delayed in the post :D And I had no probs with my RAM if peeps are interested.

HT4972 when I try to update it says I have purchased items not backed up on itunes but I believe they're all there. any suggestions how to find these items or just upgrade anyways?

I have tried to update my ipad 2 several times. I have connected it to my computer in itunes had it download or backup my info. But when I go to update it states you have purchased items not backed up are you sure you want to update now? So I go back and check it for all my apps and they are all there on the computer in itunes. I still have the original iso 4.3.3 please help as all

Even though you think that all of your apps and purchased content is in iTunes, transfer your purchases using these instructions and then try and update again.
iTunes Store: Transferring purchases from your iOS device ...

Hello - just looking for some guidance. I have MBP running OS X 10.10.2, Acrobat X 10.1.13. The display on MBP is perfect except in Acrobat - where the fonts are jagged not just on the document but also in the menus and dialog boxes. Any ideas how to corr

Similar Messages

Maybe you are looking for