Hello, My Ipad3 does not show the music videos in iTunes.
Hello, I have sync my new Ipad with my Imac and now the downloaded music-videos I bought from Itunes won't show on my Ipad, I hear the sound from the video but not the video.
I also tried to buy from Itunes directly from my Ipad. It was all the same, sound yes, no video.
I have also an Ipod touch, no problem with the music videos
Watch them in the video app, not music.
Similar Messages
-
I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?
You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.
-
hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date
Hi,
How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
Get-MailboxFolderPermission -Identity
CEO’s email address:\Calendar -User assistant’s email address
Also check with:
Get-Mailbox -Identity CEO’s mailbox
| fl *GrantSendOnBehalfTo
Please let me know the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
InsertRow does not show the inserted row on the view
hello:
The code below works well and shows the row on the view when added. However, when there are several existing rows and I have to scroll to next pages. an insert button on that page does not show the new Row at all. Is there a way for me to see the row even if I scroll over to the last page and try an insert?
ViewObject myVO = this.getMyView();
Row newRow = myVO.createRow();
newRow.setAttribute("Id", myId);
myO.insertRow(newRow);
ThanksHi,
I also have problems with code above for inserting a new row.
When I insert a new row in a table and click on column header (to change sorting), that row (and any other new row before committing) disappears from table. And if I commit that table (without missing row), the missing row reappears with next refresh.
Selection in that table (using SelectOne component with Autosubmit=true) also doesn't work with new rows (with existing rows it works fine). Selection allways sticks on first inserted row!
Something weird is happening here...
Please help. -
Exporting does not export the music tracks.
hello- i am needing help exporting my movies from Adobe Premiere Pro 2014. When i try to export a movie, it does not export the music tracks. the audio is fine, but it is not exporting the music beds. any ideas as to why would be VERY helpful! thank you!
==============================================
Edited by moderator to trim the title down to the essential.More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840 -
The Move/Copy option does not show the phones gall...
Hello,
I want to move some photos (wallpapers) to the phone's Gallery to use them for slide set but I can't do that... The Move/ Copy option does not show the phones gallery. It only shows the MMC, Games and My Apps. Please tell me what should I do.
Thanks.
Moderator's Note: Post was moved and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.Because you posted this message in a thread about the Nokia 301 before, are you about a Nokia 301 as well?
Nokia 301 » Menu » Apps » Files or Gallery » … » (do not open but highlight) your file » Options » Move. Did that help? -
PI sheet does not show the table of materials to be consumed.
Hello,
Weu2019re trying to customize the pi-sheet on SAP 4.7 (SAP-APPL Release 470) and weu2019re having some problems.
On transaction O12C (Define Process Instruction Categories), weu2019ve created an Instruction Category for Material Consumption using Type of the process data request equal to Repeated process data request. Doing this, when we create a Process Order, the PI sheet does not show the table of materials to be consumed.
If we use Type of the process data request equal to Simple process data request instead of Repeated process data request, the PI Sheet works well (The table of materials to be consumed are showing).
Thanks in advance.Hi,
Is the issue resolved...? If yes then how...
If not, then can you please elaborate more on the process instructions charateristics you have used. Just list first ten characteristic and there values.
Regards
Neeraj -
Field Explorer in Crystal Reports does not show the same names as Bex Query
Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advanceHi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo -
I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?
iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.
-
Why this query does not show the result?
Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID OWNER OBJECT_TYPE
69662 HR TABLE
OE SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYSHi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl -
Report does not show the main section while calling from forms 6i
Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advancecan you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report
-
my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?
I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
It seems to be Apple bug.
Thanks for you efforts -
I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
do I have to partition it and name it first. -- if so just one partition?Do this:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation. -
ME23n , Does not shows the values correctly in print preview
Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandibIt turns out that this problem went away after the program crashed. Everything seems to be working well now.
-
Acrobat Pro "save as" function in the file menu does not show the current directory of the file
I have installed CC but Acrobat Pro gives me headaches.
The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
I use Windows7 professional 64bits.I use what seems to be the latest version available on the Cloud:
To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
So here it is, open:
When I do a "Save as", it takes me to a totally different place on the disk!
Very annoying...
Thanks for your time!
JJ
Maybe you are looking for
-
Can't Get speech recognition to work.
When i try to get speech recognition to work nothing happens. I have calibrated it, it regognises everything i said when i calibrated it. I know i am using the right microphone (internal) and it works because you can see. When i click on speech comma
-
I've created an iBook with iBook Author, downloaded it onto my iPad. When looking at my iBooks in list view the title and author are shown but there is no category and I can't figure out from any documentation where you can define the category for th
-
Hello, it says it will take 65 hours to download a movie that was already purchased on the Cloud, How do I speed up the process. It says to go to Setting in I- tunes Store and select a lower video resolution but I don't see the Settings symbol in I
-
Hi, I have a issue when trying to burn a dvd with encore cs5, I get a error message before the burning process. PGC "sequence 1" has an error at 01:12:43:03. The data rate of this file is to high for DVD. You must replace the file of a lower data rat
-
HP Deskjet 3520 Prints too small and when trying to Scan it says can't find Computer..
HP Deskjet 3520 ALL IN ONE & E-PRINTER I have had this printer about 1 year and have never got it to print out things(Some) where it can hardly be read. (I have to have a magnifyng glass to read some of it others fine. The kind I AM NOT ABLE to rea