Hello my iphone 3g can not connect to home network via wifi

Hello to all, with my iphone 3g can not connect to home network via wifi. This only happens if I apply protection to the network. Unprotected my Iphone connects fine. Obviously the password to write error-free. I can not figure out what depends on this factor, however, another iphone connects fine. Help me please.

I have a similar,but slightly different problem. My iphone 4 recgonizes my home wifi and shows it under Settings, but will not access it, no signal shown, just 3G. It will access other wifi signals. My wife's iphone works fine, as does an ipad and macbook. This is new for my iphone, about 2-3 days.
Help! I reset network settings and rebooted the router (Apple), no avail

Similar Messages

TS1398 my iphone 5s will not connect to the internet via wifi since the latest update was performed this morning need help

unable to connect to the internet via wifi since the latest update

Hello,
Try Reseting your decive, check your settings or manually restore your iphone bu putting it in DFU mode and connecting it to iTunes there are many youtube videos on how to do this I hope it works and wish you good luck with it. If It doest call apple care.

IPhone WiFi will not connect to home network.

iPhone will not connect to home network. WiFi is on and correct password is entered. iPhone error msg says incorrect password. Reloaded network software and did not activate password but iPhone still shows network as locked.

Some people who experience issues connecting to or even seeing there Wireless network should follow these steps.
These steps are just a guideline and its not 100% that it will fix your issue.
Mainly, if the issue persists, its possible there is an issue with your iOS settings or a hardware failure within your iPhone or iPad, specifically the Wifi adapter.
You would want to follow these articles to do a reset & restore prior to saying it is a hardware issue.
#1: Reset: http://support.apple.com/kb/HT1430
#2: Restore: http://support.apple.com/kb/HT1414
You will need to access your Admin control panel for your router.
If you have an Airport Extreme BaseStation, you just need to open the Airport Admin Utility found in Applications > Utilities Folder.
Enter your credentials and you will have access to the settings from there.
For a PC: Do NOT use the CD that came with your router. That is used for people who do not know how to setup a router properly and these settings will not be available for you in most cases.
If you are using anything other than an Airport BaseStation:
Open a web browser:
In the address bar, type:
192.168.1.1 (Mainly used for Asus, Linksys, etc) or 192.168.0.1 (D-link,Belkin)
How to figure out what the IP address is to type in?
Windows:
Hold down the windows key, then press R. This brings up the run box. In that box type "cmd" (without the quotes) and press enter. In the black box that pops up, type "ipconfig" (without quotes) then hit enter. Your default gateway is the IP address for your router. It will start with 192.168.....
Take that number and put it into the address bar in your browser and hit enter. It will then ask you for a user name and password. For linksys, it's admin for both. If you have another brand, just google "default password for ******" replacing the asterisks with the brand name of the router. Once you have entered the correct user name and password, you're there.
Mac:
1.From the Apple menu, select System Preferences.
2.In System Preferences, from the View menu, select Network.
3.Select the appropriate port. For example, choose Ethernet for broadbandconnections, AirPort for wireless, or Internal Modem for dial-up.
4.Click Advanced... , and in the sheet that opens, click the TCP/IP tab.
The number next to "Router:" is your default gateway.
Once you get into your admin panel do these setting changes.
1.On the router change the channel for the 2.4mhz band to channel 1, 6, or 11 (recommended), rather than auto.
2.Also set that channel width to 20hz only, rather than 20hz or 40hz (Auto)
3.Make sure Security is set to WPA/WPA2-Personal. Anything else will cause issues. (of course, make sure you know your password for security)
4.Make sure to Apply/Save these settings. Sometimes the wireless connectivity will go out during this change and will come back on within 15-30 seconds.
5.On the iPhone/iPad go to Settings > Wi fi > click the blue arrow beside the network > Select Forget network
6.Go to Settings > general > reset > reset network settings
7.Power the phone off and on. Connect again
For additional assistance in troubleshooting Wifi connection problems go here: http://support.apple.com/kb/TS1398

Iphone 4s can not connect to wifi

I have an iphone 4s can not connected to wifi even it was working the day before problem.

Power off your phone, unplug the router and modem for 2-3 minutes, then plug them back in, power your phone on, and try to reconnect.

IPhone 4 will not connect to macbook air via bluetooth. Message " not supported"

iPhone 4 will not connect to macbook air via bluetooth

Try the suggestions here > iOS: Device not recognized in iTunes for OS X
If nothing helped, repair permissions.
Disconnect the iPhone.
On your Mac open Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Then select: Repair Disk Permissions
This process can take a few minutes.
When it's done, restart your Mac and connect the iPhone.
If that doesn't help, reset the PRAM > About NVRAM and PRAM

Why I can not connect ipad2 and iphone5 to wifi by using d-link modle? but my computer and iphone3 can do it.

why I can not connect ipad2 and iphone5 to wifi by using d-link modle? but my computer and iphone3g can do it.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Equium A200 can not connect to the interest using Wifi

Hi,
Since having to reinstall Windows Vista Ultimate, I can not connect to the interest using Wifi. It works fine for Ethernet, but when choosing the "Connect to the Internet" screen, its blank and will not find any wifi connects or let me manually connect to one.
In Device Manager under Network Adaptors, it now only shows the Ethernet Controller and not the Wifi adaptor. I have tried to download the driver from this site and after rebooting nothing has changed. I have made sure the machine has all the latest Windows updates as well. I have also mader sure that the wifi button is switched on at the front of the machine.
Also one a side note I cant seem to find the exact name of the Laptop in the system section of Control Panel other than Equum A200. On the download driver page there is NOT a A200 listed only A300 and A300D.
http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&mode=allMachi nes&action=search&teddProduct=759&selShortMod=667
Any help would be grateful.
Spec:
Windows Vista Ultimate
Toshiba Equium A200
32-bit Operating System

>Also one a side note I cant seem to find the exact name of the Laptop in the system section of Control Panel other than Equum A200. On the download driver page there is NOT a A200 listed only A300 and A300D.
I guess you didnt look into the Archive the A200 is a little bit older therefore the drivers are placed in Archive!
If you want to know what driver you need then I recommend checking this faq:
http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78
All Wlan drivers can be found here:
http://aps2.toshiba-tro.de/wlan/

My ipad 2 and iphone 4S won't connect to app store via wifi but will connect via 3g

my ipad 2 and iphone 4S won't connect to app store via wifi but will connect via 3g - both are running 6.0.1 - I have tired several wifi networks but same result.

Hi LandJ1980,
I would recommend first trying these steps:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that does not work, this article has some additional ideas to try, even though you are only seeing this with the App Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers!
- Ari

My Iphone 5 won't connect to a network or wifi

My Iphone 5 won't connect to a network or wifi, I just got the phone less then a month ago.....It is driving me nuts and I don't know how to fix it!I

Have you read through the user guide and taken basic troubleshooting steps? What have you done so far to troubleshoot?

Iphone 3g "Can not connect to Itune"

I need help anybody there! For the past four weeks, I have a problem with "APPS" on my 3g iphone. At US western pacific night time, I always have this message "Can not connect to Itune" every time I want to buy an apps or surf the apps store on my iphone 3g. Is this server problems, heavy traffics around the world? I called Apple Tech and did exactly what they told me but.....not resolved. Help!

I would suggest calling apple tech support again and telling them what they told you to do did not resolve your problem and ask for more help. . .

"Can not connect to iTunes Store" via iPhone and iPad

I can not connect to iTunes store from my mobile divices. I can through iTunes on my Macbook Pro running Leopard (10.6.8). My company has not authorized update to Lion yet.
I have the same problem on my iPhone and iPad 1. This has occured since updating to IOS 5.0.1, but I do not know if it is the cause or just a coincidence.
Since I can make purchases through my Macbook and sync, it's not a crisis, but just an big irritation.

Apple ID problems.
An additional consideration might be that I have had Apple ID problems. With the move to an ID for iCloud my old Apple ID and a new one using an email address got mixed up and in conflict. It took Apple Support staff to clean it up. For a few days, everything seemed to be running fine on my new/old/restored single ID. I did not think this was a problem, because the error sited a connection problem not an ID or password problem. Could this be a factor?

IPhone 3 can not connect to new nets

Hi, I have an iPhone 3 and it has the problem that whenever I want to connect to a new wifi point access I introduce the correct password and the device says "It is not possible to connect to "NETNAME"" though my iPhone is near to the point access router, it is so near that I even put the device next to the router. This problem didn't happen before, I was able to connect for example to my university's wifi or office's wifi. They changed their nets, so I had to connect again for the first time and then it would be automatic to connect, but I can not connect for that first time, although the net is similar to the mentioned before. What can be the problem? PD: I can connect to my house wifi's but my device has to be really near to the router, its signal caption is really poor.

IPhone 3 G can only connect to Wi-Fi 802.11 b/g.
Maybe because of that since you have no problem connecting to your home wi-fi.

Iphone 5 will not connect to home wifi or Bluetooth after iOS 7.1.1 update! Using unnecessary data please help!

My iphone 5 will not connect to my home wifi or Bluetooth after I completed the iOS 7.1.1 update. Before the update I was able to connect to my home network with no issues. Now it rarely finds my home network (unless I'm right in front of the router and even still the signal is weak) and when it does find my home wifi network it frequently disconnects from it. I followed previous suggestions to turn off router or forget network settings and re-establish them but it continues to happen.
This also happening with my Bluetooth connection. My iphone 5 would automatically connect to my home phone Bluetooth prior to the iOS 7.1.1 update. But now my device no longer connects, which means my home phone no longer rings when my cell phone is ringing.
I probably would be less worries if I did not have to monitor my data usage with Verizon. However, I do have a limited amount of data to use and I recently reached the max and had to pay extra money due to my wifi being unable to connect. Can anyone please help me with fixing this?

If you have Applecare take it back to the shop and demand a replacement. If not you're stuffed. It's a bug that they've put in the software to get you to buy another iphone. You can maybe warm it up with an hairdryer near the speaker and then turn it off and put it in the freezer for 10 mins then retstart it and wi-fi is there. It could also be a problem with the chip, if you do the freezer thing it comes back.
Apple knows its a problem as there are millions of people out there that it is happening to, in my opinion get shut and get a Samsung!!!! That's what i've done and love my new Samsung S3 Mini miles better than the iphone!!!!
Go on youtube atnd look how many millions of people this has happened to.
Someone needs to put this in the media so they will actually do something the robbing bleeders!!!!!
Also whatever you put on these discussions will get it wiped if Apple don't like what you put!!!!

Can not connect to wireless networks with ipad 2

My ipad used to connect to the wireless net at home and in public areas.
Now all by the sudden it can't "see" the network.
Message: " could not connect to wireless network"
I have tried "everything" also on different networks,
except resetting the modem.
My iPhone works, as do all my other computers.
Modem is Zyxel P2812

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

When I set up a guest network on my time capsule nothing can not connect to this network

I have an airport time capsule and I set up a guest network on it. This network is visible, but I can not connect to this using my mac, windows lap tops iPhone and samsung galaxy note 4.

Actually the TC is the main router, but the problem is when I put this on NAT DHCP mode
The device that you call your "modem" is very likely a modem/router or gateway type of device that combines both the functions of a modem and router in one package.
The Guest Network feature will only work correctly when the TC connects to a pure modem.....not a modem/router or gateway.
To see if this is really your problem, please post back with the make and model number of the device that you call your "modem" so we can see exactly what you have.

Hello my iphone 3g can not connect to home network via wifi

Similar Messages

Maybe you are looking for