Hello! My ipod touch have a problems whit audio. After I upgrade to iOS6

Sometimes my ipod don't have volumen. This problem start with the new upgrade iOS6.
I'm waiting for another upgrade...

Try doing a hard reboot on your iPod (Press and hold down your home and power buttons at the same time until the iPod reboots) If that doesn't work, restore your iPod in iTunes.

Similar Messages

  • Ipod touch no longer charges in car after software upgrade. Wants app?

    I have an Ipod touch 4th generation. It was working beautifully connected to the USB port in my 2012 Honda CRV until I upgraded the software to 5.1.1. Now it says that I need an App but it won't tell me what App and it no longer charges through the car's USB. It still plays through the car stereo but I have to disconnect it from the USB to control it.

    You can try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.
    If still problem then the iOS broke full compatibility. you have to then wait for either Apple to fix the problem in an iOS update or for Honda to fix it via a firmware update/
    Have you contacted Honda?

  • IPod Touch 2G Home button not working after OS4 upgrade

    Hi there,
    hope someone can help. Upgraded an iPod Touch 2G to OS4.1 and teh home button will not work now normally, but will work if its attached to a PC and iTunes. Anyone seen this before and how to fix it?
    Cheers,
    Martin

    HI there,
    thanks for the reply. Tried both of what you suggested, also tried the home button thing only working while plugged in with two computers and two different leads which is why I suspect is an operating system thing.
    I may try downgrading the operating system next, just have to find a copy of an old one somewhere.
    Cheers,
    Martin

  • Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load wit

    Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load with the USB but do not load the battery me the icon of the battery appear and below of her the beam that indicates that this being loaded but this way I have left it the whole yesterday and what goes of today and continues without loading anything! They can help me porfavor I am grateful for them to him very much!   And my PC does not detect it not itunes

    Try the not-charging topic of:
    iPod touch: Hardware troubleshooting
    It could be that the battery is dead.

  • My ipod touch screen has gone white with bright white spots, I have restored it but it is still white.  It shows in ITunes but I cant do anything with it.  Can anyone help please

    My Ipod touch screen has gone white with bright white spots on it.  I have restored it and it shows in ITunes but the screen is still white.  Is there anything I can do? The warranty has run out so I will have to pay for any repairs (if it can be repaired).  Any help would be much appreciated.  Thank you in advance.

    If you still have problems after restoring the iPod to factory defaults/new iPod then you very likely have a hardware problem.  I would make an appointment at the Genius Bar of an Apple store.

  • Why does my iPod Touch have a white screen and how do I get rid of it?

    Why does my iPod Touch have a white screen and how do I get rid of it?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1414 iPod Touch has a blank white screen and the computer does not recognise it. I have tried pressing the Home button and Up Volume button and Off button to no avail. Thank you

    I tried to download an upgrade that was recommended by APPLE, the upgrade stopped halfway through and the iPod Touch was turned off, now the iPod Touch has a BLANK WHITE SCREEN and is UNRESPONSIVE to the COMPUTER
    I wonder if anyone can help
    Thank you
    Brizey

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • My ipod touch is showing a white blank screen, have tried resetting it but doesnt work????any suggestions?

    my ipod touch is showing a white blank screen...have tried resetting it but nothing! any suggestions??

    Let the battery drain completely. Then let it charge for about an hour before trying another reset. Helped with mine.

  • I have a ipod touch 2nd gen has white screen how do i fix this?

    my ipod touch 2nd gen has white screen how do i fix this?

    try to reboot your ipod, to do this hold the power button for 5 seconds, continue to hold the power button and press the home button for 10 seconds (at about 8 seconds the ipod will turn off ignore that) after that realease the buttons and your ipod should return to normal. (this working on my ipod 4g when it went green screen) hope it works!!

  • IPod Touch 2G 32GB with White Apple Logo and Failed Restore / Recovery

    My Specifications:
    iPod Touch 32GB 2G
    iPhone OS 3.1.3
    2.8 Ghz. Intel Core 2 Duo iMac
    Mac OS 10.5.8
    iTunes 9.0.3 (15)
    Problem:
    After updating my iPod Touch to OS 3.1.3, my iPod touch started having sync issues where it would say the sync failed. The backup files stopped being created and the latest version was over two weeks old (from prior to the updated to 3.1.3). After an application became unstable and crashed frequently, I tried to do a reboot by holding the Power & Home buttons until the Apple Logo appeared to begin the reboot process. After waiting for 6 hours, the ipod still had not rebooted but was frozen on the White Apple Logo screen.
    Troubleshooting Steps I’ve Take:
    1. Attempted to follow Apple Frozen iPod Touch and Common Issue Troubleshooting Guide. The iPod will not shut down using the Power Slider function.
    2. Restore via iTunes using the DFU Restore Function (Power Button & Home Button for 10 seconds, releasing the Power Button, followed by plugging in the USB cable while holding the Home Button down). iTunes recognized the ipod at the point and began the restore process. The process took almost 32 hours and when it was completed, the ipod would not boot up by remained with the White Apple Logo. My original attempt was with using a powered USB hub.
    3. Repeated the restore process but by plugging directly into the computer and eliminating all USB devices except keyboard and mouse. Deleted the OS 3.1.3 updated and made iTunes download the file in case it was corrupted.
    4. Rebooted computer between each attempt.
    5. Deleted iTunes and the Apple Mobile Device Services as per Apple Article HT1747. Rebooted the computer and reinstalled iTunes. iTune would not recognized the iPod Touch to do a restore using the DFU method. I’ve retried various timings and versions with the cable plugin, booting with the cable plug in and not plugged in, etc... No effect.
    6. Repeated the above steps on a MacBook Pro running OS 10.6. iTunes wouldn’t recognize the iPod.
    7. Repeated the above steps using a different sync cable. iTunes wouldn’t recognize the ipod.
    8. Unplugged the iPod and let it completely drain until the screen went blank for 1 day. When pressing home button the Low Battery / Plug In warning appears. Recharged the battery using a wall plug for 12 hours. Retried the above steps. No change.
    What I’ve Eliminated As The Problem Via My Troubleshooting:
    1. Computer Hardware
    2. iTunes Software
    3. Sync Cable
    4. USB Conflicts
    What I Need Is A Solution:
    1. Completely wiping my ipod is an acceptable solution at this point. I’ve spent a week working on this and wasted way too much time. Is my iPod trashed thanks to an OS update?
    Any help or suggestions would be greatly appreciated. I've ready each forum posting involved White Apple Logo Issues and have come up empty. Am I the only persons would is having trouble restoring?
    Thank you,
    Paul

    More Troubleshooting Steps For Your Consideration:
    I was able to restore back to iPhone OS 2 by using a laptop that had not been synced with my ipod touch previously. When I did the DFU with it, iTunes downloaded OS 2 and it worked.
    Then I went back to my iMac and proceeded to install OS 3.1.3 and that seemed to work ok too.
    I've been getting the white apple logo of death, however, when I try to sync applications. All seems well, but as it is finishing the ipod touch reboots to the White Apple Logo Screen and stays there. iTunes seems oblivious to this taking place.
    During my second rebuild starting with OS 2 and then updating to 3.1.3, it worked again. When I tried to add apps, I only put on a dozen. That worked too. I did get the White Apple Logo Screen of Death once again and I did the third sync to get the rest of my apps in place.
    I'm on the third rebuild from version 2. I'm going to try to use an old file I have of 3.1.1 instead of 3.1.3. Also, I'm going to add one application per sync. At least this way I might be able to find out if it is a specific app that is causing the problems.
    In my further research, it appears that this bug has been in place since the early days of iPhone OS 2.
    All told I've spent over week with my computers tied up working on this problem. I think it would have more cost effective to just buy a new iPod. (I'd rather wait for the 4G version this fall!).
    Just in case anyone else has been having issues, that is where I'm at. I'll let you know if I figure this issue out in more detail.
    Thanks,
    Paul

  • HT201263 after restarting and restoring ipod touch, display is still white screen

    after restarting and restoring ipod touch, display is still white screen. I have done this several times. One time, the display went to the home screen, but immediately went back to the white screen when I plugged it into the charge cord. The music continued to play however. help!

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • Ipod Touch 1st generation: blank white screen - I tried holding both buttons and connecting it to the computer, restoring it, and still nothing. What else can I do?

    Ipod Touch 1st generation: blank white screen - I tried holding both buttons and connecting it to the computer, restoring it, and still nothing. What else can I do? I did not drop it in water.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • My iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

    my iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

    If you can't get it to shut down or restart when holding down the Home and Sleep/Wake buttons and you can't get it recognized in iTunes to restore it, the iPod may have suffered a hardware failure and will need to go to Apple for service. Someone else here may have additional suggestions, though.
    There is no "fifth generation" iPod touch, by the way, just for the sake of clarity; not yet, anyway.
    Regards.

  • HT1349 The screen to my ipod touch has gone completely white.  I cannot power it down or do anything at all.

    The screen to my ipod touch has gone completely white and I cannot power it down, or do anything.  I have it plugged into a power source right now

    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo.

  • My ipod touch is having problems with the headphone jack when I rotate a little song stops

    my ipod touch is having problems with the headphone jack when I rotate a little song stops

    Hey Silverdemon, sounds like a short, most likely in the headphones. Try a different set of headphones with this iPod or try the headphones with a different device. If the problem stops with your iPod or it moves to another device, then replace the headphones. If within 1 year of date of purchase Apple will replace the headphones for  free if problem is a defect, not abuse. If the problem continues with a different set of headphones, check the port for damage and foreign debris. If you note debris, attempt to remove it, if damage noted contact Apple and set up an appointment to have it evaluated. if nothing appears wrong, try plugging / unplugging to jack about 12 times maybe corrosion on the contacts if so that should clean it. Next thing to try reset your iPod. After that try restore from backup. Last resort, restore to new. Just make sure you make a full backup to your computer before you restore so no data is lost. If nothing works, contact Apple and set up an appointment to have your iPod evaluated. Good luck, Cheers.

Maybe you are looking for

  • Frequent kernel panics & rebooting

    My PowerBook will run fine for about 15 minutes at a time and then I am presented with a message saying "Your computer needs to be restarted. Please hold the power button down until it turns off, and reboot." I thought this was just going to happen o

  • Billing problem in depot sales

    Hi,     We was into the depot sales project.We have done till excise duty. That means,first we are created a sales order and then outbound delivery for that.So based on the outbound delivery number normally we do billing. But here after outbound deli

  • How to relocate table in new tablespace in Oracle 8i

    Hi all I would like to know how to relocate table from one tablespace to another tablespace in Oracle 8i. Currently, I create new table without data in new tablespace and then load data from old table in old tablespace. However, I think it is not eff

  • IPod iMessage troubles

    I am having troubles with iMessage on my iPod 5.  I have iOS 8.2.  It won't let me text just one person.  I can text anyone else but this person.  I send a message, and it just shows the red exclamation point and says "Not Delivered".  I tap "Try aga

  • Save problem!

    I got a problem with saving fla file in Flash CC. i edited my code -> crtl + s to save -> ctrl + enter to build -> close the swf -> close the fla file -> re-open the saved fla file -> my edited code disappear Here is my code: - Before edited: count =