Hello, Newbie here,. Capturing is set to "Audio Only"

Hi. I'm here in behalf of my sister, she seems to have a problem with Final Cut Express. It's that the capture setting is set to Audio Only, and we don't know how to deselect it and/or select Capture Video and Audio. Sorry, we're not so good with Final Cut Express HD and can you help us?

Did you quit the application? Are you looking the user preferences? There is no way to switch this off as the whole functionality you're seeing is not normally available within FCE. You might need to completely uninstall and reinstall the application.

Similar Messages

  • Hello Newbie here

    I am trying to install an update and it is telling me to close the ElementsAutoAnalyzer.exe????  Where do I find this and how do I do it?

    Windows: Alt+Ctrl+Del opens Task Manager. Highlight the process and click 'End Process'.
    Mac: Use the Activity Monitor in Utilities to find and end the process.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Capture Problem - No Video-Audio only TC

    Hello,
    I haven't had this problem before, and I've done a search on this forum. But none of the solutions that seemed to have worked for other posters has worked for me. So here we go.....
    I'm using OS 10.4.11, QT 7.4.1, FCP 6.0.2 on a Dual 2.5GHz G5, Decklink Extreme.
    I'm trying to capture MiniDV material on a Sony HVR M15 player (Pal version) via Firewire. In the Log&Capture window, I can control the player, and I see the TC, but no Audio or Video comes through. I've checked the deck controls, the tapes are recognised as MiniDV 50i.
    I get video and audio with the Blackmagic Deckcontrol app, but that is rather clumsy.
    No other device uses a FW port. Capturing to my 2nd internal harddrive.
    I hooked the deck up to my Intel MBP and I got a glimpse of video, but then it disappeared and I got the same problems as with the G5.
    On the G5, I then trashed my prefs, shut down, waited for 5 minutes, started the deck, turned on the G5, tried it again, no use.
    I used Easy Setup DV-PAL, btw....
    Anyone have any ideas, am I missing something? I know the deck works, I hooked it up to my TV via composite out.
    Sheesh, always when it rains.....
    Cheers,
    Colin

    Hi X,
    good to know that. however, in my case the fw cable wasn't attached. I had to attach the deck to my telly, which is in another room. Well, I did get some excercise yesterday.
    But thanks for your help. One thing I know is that I won't hire this deck again. It wouldn't work with my G4/G5/MBP, different OSX and FCP versions.
    Oh well, I wouldn't mind so much if it hadn't also wrecked one tape. I guess if things go wrong, they REALLY go wrong.
    Ok, gotta go through the material now, try and do something nice with it.
    Hope you'll have a better week and thanks,
    Colin

  • Audio only Capture

    Hello Folks,
    I am currently working on information video project and before I hire voice-over artist, I recorded my voice myself in order to lay out the footage on timeline, however, my FCP3 just won't capture audio only even thou I set on "Audio Only" on capture window.
    Anybody know why this is happening outthere???

    Randy is correct, it would help to know how you're capturing and that recording the VO to your camcorder or deck will provide you with a timecoded source in the event you need to recapture.
    One thing about audio only capturing from a non-video source: FCP needs a video signal to accompany the audio - even if you're capturing audio only. For example, if you connected the analog audio signal to a DV device such as the ADVC110 converter without a video signal, FCP won't capture.
    You can connect any video source. A powered on camcorder, VCR or whatever is handy. Since you will only be capturing audio, it won't matter as long as it's a viable signal.
    -DH

  • Audio Only programs on IPTV

    Is there a step by step guide for setting up Audio Only programs in the Content Server for IPTV? I am trying to stream audio conferences. I would much appreciate any help on this

    Hi
    You can play Audio only program in the same way as you are doing with normal program(Audio & Video). IP/TV send the audio & video data on different ports.
    So you can make Audio only Live capture program in IP/TV CM as you are doing for normal programs, just uncheck the Play Video option in program creation page in CM.
    http://www.cisco.com/univercd/cc/td/doc/product/webscale/iptv/iptv35/mgr_usr/chap4.htm#1014462

  • Setting up Audio in New Project

    Hello:
    I am fairly new to CS3 with a lack of understanding for audio channels. I shot a two person interview the other day with each person miked with a lav. Each lav was recorded on a separate track. I set up a new project in CS3, 720p 30fps, audio – stereo. I imported the clips and starting bringing the HD clips into the timeline. What I see is one video track and one audio track. I expected to see 2 audio tracks because there were two lavs. Well, I decided to start another project and try again. This time, I set the audio as mono, imported the clips and when I bring them onto the timeline, the video and both tracks of audio appear on Track 4 and 5 (which I assume is reserved for mono). So I am confused. Why do I have to create a mono project in order to see both tracks? Perhaps I doing something wrong. Can you please walk me through how I set up a project when I am working with footage that has two channels of audio recorded on it.
    Thanks, Steve

    Ann and Jim are both correct. Leave the Project's Master set to stereo/2-channel, as that will be the most common for Export formats (DD 5.1 SS being the second, but that takes a DD 5.1 SS Encoder to produce).
    The 2-channel Audio files can be split in PrPro easily, or you could also do that in Soundbooth, Audition, or even the free Audacity.
    Though it does not directly apply to your question here, this ARTICLE might make for good reference, regarding Audio in PrPro, Audio Tracks and channel-count.
    Good luck,
    Hunt

  • Can I use one hard drive for two computers?  Newbie here.

    Newbie here.
    I currently use Time Machine for my iMac (Intel)
    I've been using my Macbook Pro (Intel) a lot lately and would like to back it up from time to time as well.
    Can I simply attach the external hard drive to my Macbook Pro and set up Time Machine?
    Can use the external hard drive for both machines?
    Will Time Machine recognized that my Macbook Pro is a separate computer and set up a separate folder on the external hard drive automatically?
    Thanks

    Hi,
    you can use the drive for as many Macs as you like, just make sure it's big enough. Time Machine will create separate folders for your Macs and will "know" which one you're using.
    Björn

  • Premiere Pro Does Not Support Audio-Only Capture For Some Formats, Such As HDV?

    In the PPro CS 5.5 Help file  under, "Recording audio", it says:
    "Note: To capture an audio-only file from a digital video source, choose Audio from the Capture menu in the Logging pane of the Capture panel.
    "Premiere Pro does not support audio-only capture for some formats, such as HDV."
    I'm shooting in HDV and if I want to capture audio only, would I just need to switch my setting to DV?
    The only thing is my Canon HV20's HDV audio is MPEG-1 Audio Layer 2, 16 bit, 48 kHz.
    My DV setting is PCM audio, which I think is a better quality format, right?
    Would there be any noticeable difference?
    Thanks.

    Capture your HDV material in the normal way and just drag audio only from the source monitor to the timeline.

  • How do I capture audio only, no video?

    I'm trying to capture an audio cassette, patched RCA/XLR to a Kona Card, to a G5 tower running FCP6. Since I want to capture audio only, I unchecked the video box in the clip settings tab of the LogCapture window. But when I capture now, I get a message saying "This operation could not be completed as there is no video".
    How can I capture audio only? Can't turn off the video in Kona ctrl panel, must be in FCP.
    Thanks in advance for the help.

    Yes, as I mentioned, I did uncheck that video box, after which I got the message 'operation could not be completed as there is no video' (& capture failed). My capture setting is to Kona, but I've also tried Generic, but no luck.
    This then led to my first crash course in SoundtrackPro, which is now recording the audio I needed. But I would love to figure out why FCP is not letting me capture audio w/o video, so any further suggestions are appreciated.

  • Audio Only Capture with IoHD - Problem

    I'm trying to do an audio only capture in FCP 6.0.1 using our IoHD as the input device. The XLR cables are live and plugged into CHs 1&2 on the IoHD. I've setup an audio only capture preset in FCP but I can't get any levels from the box and the level meters on the AJA do not register anything either. Using a capture preset I made using the Macs internal audio I was able to capture just fine but so far no joy using the IoHD. Anyone run across this problem?
    Thanks,
    Matt

    I'm having a similar problem, and would appreciate advice. I'm feeding analog audio into FCP 5.1.4 through my Multibridge Pro. I too have set up an Audio Only capture preset, and finally figured out how to get the sound coming through. I've selected "Non-controllable Device" in the Device Control menu. But as soon as I click on Capture "Now" the Capture window appears AS THOUGH it is capturing, with the message "press Escape to stop" but the audio is no long audible. And when I press Escape, no clip has been created. I have to close out of the Capture tool and open it again in order to hear the audio coming in and see the VU meters moving again. What's going on? Thanks.

  • How can I capture Audio Only?

    Hello,
    I have FCEHD 3.0 and would like to capture audio tracks only with Capture Now (from a non-controllable device via Canopus). There is no "Audio Only" option in the capture window. Any ideas??
    Thanks,
    C.J

    Hi(Bonjour)!
    No way to capture audio only with capture command.
    Simply delete the video track in the timeline.
    Or:
    Plug your camcorder audio output in your in-line socket on your mac with an audio 1/8" wire, do a voice over record.
    The resulting audio file will be a "analog" one.
    You can also use a sound editing programm like Sound studio or audacity to capture your audio-in content, and import the resulting file in FCE.
    Michel Boissonneault

  • Capturing audio only in fcp5

    I am rather new to Final Cut Pro 5 and have been trying to teach myself as I go along. I am, however, having trouble capturing audio seperate from video. I am shooting a 16mm film and need to capture audio and video to seperate files in order to synch them for edit. While I am able to capture straight video (i.e. without audio) I am unable to capture straight audio (i.e. without video in the same file). The only way that I have been able to capture audio is if some form of video is captured along with it. How can I capture an audio only file. I am using FCP 5 on a PowerBook G4 - capturing through a "Dazzle Hollywood DV Bridge" with a Canon ZR 45 for video and a Sony TCD D8 portable DAT for audio. Any information is greatly appreciated and I patiently await your response(s).
    Thank you,
    Tayman Strahorn

    I am rather new to Final Cut Pro 5 and have been trying to teach myself as I go along. I am, however, having trouble capturing audio seperate from video. I am shooting a 16mm film and need to capture audio and video to seperate files in order to synch them for edit. While I am able to capture straight video (i.e. without audio) I am unable to capture straight audio (i.e. without video in the same file). < </div>
    My welcome also but, as a beginner, you really need to run the tutorials and learn how to use the resources you paid for when you got your applications.
    Look in the online help system for audio only. Look in the manual index for audio only. Examine the chapter on capturing.
    How are you doing Video Only if you don't understand the Clip Settings function or where it is located?
    You can force DV to build separate audio and video files while capturing but it's not recommended (dunno why not). If you force separate files, you can simply delete the ones you don't want.
    bogiesan

  • Hi newbie here  . .

    Hi everyone
    (Sorry if this post is in the wrong thread but am just getting sorted).
    Newbie here and having just swapped from a Windows machine to my mac I am finding a problem with itunes.
    Please in words of one syllable . . could some one please say if using the "Open Stream" in advanced icon will allow me to connect to BBC local radio?
    If so, please could they say how?
    Ta
    ibook    

    Hi Macadam_ace,
    Welcome to Apple Discussions
    Do they have their show on the internet? The iTunes Help document says,
    "If you know the Internet address (URL) of an MP3 streaming broadcast, you can connect to it using iTunes.
    Choose Advanced > Open Stream.
    Enter the full URL of the file you want to listen to. For example, http://www.apple.com/itunes/sample.mp3."
    I hope that helps,
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • Thanks in advance..apple newbie here.  Have 12 photos/videos on camera roll, but only 3 appear on photostream (which is on), how do i get the rest over so that i can see them on apple tv.  thx so much

    Thanks in advance..apple newbie here.  Have 12 photos/videos on camera roll, but only 3 appear on photostream (which is on), how do i get the rest over so that i can see them on apple tv.  thx so much

    FAQ photo stream http://support.apple.com/kb/HT4486

  • Getting the following message on Final Cut Express "audio only capture selected video preview disabled" how can I get the video capture back?

    I'm getting the following message on screen when attempting to capture video  "audio only capture selected, video preview disabled."  How can I get the view preview back?

    FCE doesn't allow for audio only capture, it's in a twist somewhere.
    Try trashing the FCE preferences.
    Al

Maybe you are looking for