Hello once again.. i have formatted my external Hard drive it using exFAT, now my windows cant detect my device, can u plzz help me the whole purpose is getting ruined, i use Windows 7 ultimate 64 bit

hello once again.. i have formatted my external Hard drive it using exFAT, now my windows cant detect my device, can u plzz help me the whole purpose is getting ruined, i use Windows 7 ultimate 64 bit

This is a problem with the Mac OS X implementation of exFAT. I've had the same problem.
Best is to use a Windows box to format the drive exFAT. Then it can be read by both Windows and Mac OS.
But aren't Macs supposed to "Just Work"? Not in this case.

Similar Messages

  • I transferred my itunes to an external hard drive from my mac, now all of my music needs to be located. Help...

    I moved my itunes library to an external hard drive, now all of the music says it needs to be located. Not sure, but I believe it is not directed properly.

    if you do iTunes > Preferences> Advanced you can change the location of where your music is stored.  Click on change location and direct it to your external hard drive.  Of course, your external hard drive will need to be connected to your computer to play the music. 
    When you moved your music to an external hard drive, did you copy the folders or move the folder off your computer completely? I copied the folders, and left iTunes folder in my Music folder and all seems to work fine. one hitch can be is that your Library in iTunes will list all of your content, but if you have some albums on the hard drive of your computer and some on your external hard drive, iTunes will need to be told where to locate these files.

  • How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?

    How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
    I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
    Someone, Please help

    Hi Allen,
    Is there any way to store the back up to Mac and restore after formating?

  • How do i format an external hard drive for use on both windows and mac book air?

    how do i format an external hard drive for use on both windows pc and mac book air?

    Use exFAT on the PC.
    (71374)

  • I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS  without formatting it so that I can use it for Time Machine and the like?

    I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS  without formatting it so that I can use it for Time Machine and the like?

    There aren't any 3rd party apps or anything. I use PC's and Mac's at school and the only computer connected to a printer at my house is a PC so i need access to both

  • I have a an external hard drive formatted for Windows, and I want to move those files to a new hard drive formatted for both Windows and OS. Is this possible?

    I just purchased a MB Air 13", as well as a Seagate Slim Backup Plus. I have an older external hard drive that I was using with a Dell laptop. I would like to get the files off of the older external hard drive, and onto the new Seagate drive. Is this possible? I'd also like to be able to add files going forward to the Seagate from either a PC or a Mac and be able to view/use them on the MB Air 13".
    Thanks in advance.

    You will have to format the Seagate external HDD to a format common to both Mac and PC such as ExFAT.  That should allow you to transfer files from the old HDD and still allow you to use with your MBA.
    Ciao.

  • I have a Toshiba external hard drive that i used to back up my Windows 7 HP -- I want to transfer files to my new Mac and it won't accept. Help?

    I have a Toshiba external hard drive that I used to back up my Windows 7 HP -- I am not able to get the files off of it (pictures) onto the Mac. I am NOT a very technical person. IS there a simple easy way to explain and do this -- OR a simple way to just say it is not possible?

    If you connect the external hard drive to your Mac does it show up in the Finder? If so, do the files you are trying to transfer show up? What happens when you try to move them over?
    What kind of Mac are you using and what operating system does it have running on it?
    Let us know, we'll keep helping you.
    Best of luck.

  • If I have to format an external hard drive to make it Mac compatible, will it delete all the content in the external hard drive?

    If I have to format an external hard drive to make it Mac compatible, will it delete all the content in the external hard drive?

    As others have said, the answer to your question is a big YES.  Formatting a drive will delete everything!
    To keep your data, yet reformat the drive for optimal Mac compatibility, you will need to:
    1) copy your files to a different hard drive (I would recommend two different locations if you value your data)
    2) repartition/format the external drive
    3) then copy the files back to the external.
    You haven't given details but if you need the external to ONLY be compatible with the Mac (and no longer care if if can be read by Windows), then you will want to partition the drive using the GUID partition scheme, and format as the (HFS+) "Mac OS Extended (Journaled)" filesystem.  You can do so using the built-in "Disk Utility" application on your Mac (in the Applications/Utilities directory).  Here are instructions:
    http://support.apple.com/kb/ph5845
    If you need the drive to be compatible with both Mac and Windows computers then please post that so someone can recommend a solution for your specific needs.

  • External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

    External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

    Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
    Does the drive now appear in finder..
    If not reboot both drive and the AE.. it should now appear.
    If it doesn't work with direct connection try a powered hub.. that can help.

  • Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

    Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

    Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
    Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
    See http://www.alsoft.com/diskwarrior/

  • I have a seagate external hard drive with files copied from windows pc. If I will download NTFS driver from seagate to my mac, could I install it safely without harming my files in the external hard drive? I am afraid I may erase all files in there.

    I have a seagate external hard drive with files transferred from my windows pc. If I will download NTFS Driver from seagate to my mac, could I install it safely without harming my files? I am afraid.. I might erase all my important files during the installation..

    Thanks a lot! I have already downloaded Paragon Driver and it works well with seagate external hard drive. I am copying as of now my important files from my mac to it. However, I have only the trial version which will expire in 10 days. I don't have credit card to buy for it.

  • I have just bought a new pc with windows 7 my old one can not be started so I can not deauthorise etc, how do I now put my iphone 4 on my new computer, I don't care about the songs I have those on external hard drive, but I don't want to loose my contact

    I have just bought a new pc with windows 7 my old computer cannot be started so I cannot deauthorise it etc, how do I now put my iphone 4 on my new computer, I don't care about the songs I have those on external hard drive, but I don't want to loose my contacts, calenders etc

    Terry,
    Plug your iPhone 5 into your Leopard Machine.
    Fire up iPhoto.
    The phone should become available in iPhoto, and then you can import the camera roll.
    -Alan.

  • How to format an external hard drive for vista and snow leopard?

    I want to format an external hard drive to attach to Airport Extreme base station to us with Snow Leopard and a PC with Vista. What format should I use for read/write access for both?

    I use NTFS for my external drives being used on both Macs and Windows. To get the Mac to write to NTFS, you need a separate program. I use Paragon for Mac software. It works behind the scenes. There are also some free things that do the same thing but I found them cranky and unreliable. YMMV.
    Windows can not read any of the Mac disk formats without additional software.. FAT32 is fine but is extremely limited.
    For the last year, I have had absolutely no problems on any computer, Mac or Windows.

  • I get the following error when formatting a external hard drive. Partition failed with the error:  POSIX reports: The operation couldn't be completed. Cannot allocate memory

    I get the following error when formatting a external hard drive.
    Partition failed with the error: 
    POSIX reports: The operation couldn’t be completed. Cannot allocate memory
    I have a Macbook pro 13" A1278. I purchased it around december 2010. I have a HHD 3.5" drive desktop select II 1.5TB. I purchased it around Febuary/March 2011 to use with my Macbook pro. I formatted it and moved all my files to there, I got it so my macbook's hard drive wouldn't brake and I lose everything on my macbook.
    Is there any fixes?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • Photos. They are on my macBook, backed up on time machine. Copied them (hours and hours) to external hard drive. They are now in alphabetical order (19,000  of them) NOT IN THEIR EVENTS or date order-and have been taken with different cameras- help!!!!!!

    Photos.
    They are on my macBook, backed up on time machine. There are 19,000+ of them, some rescued from a pc crash- which I used the nifty iPhoto to put back into date order.    
    I want to take them all off my laptop, now............as I need to use it for WORK!!
    Copied them (hours and hours) to another external hard drive.
    They are now in alphabetical order (all 19,000+ of them) NOT IN THEIR EVENTS or date order. (-They have also been taken with different cameras over the years and some of the generic camera numbering remains.)
    I have tried to copy them (only a few as an experiment)  one event at a time, but that again "opens up" the Event "folder" and tips them out as individuals and therefore just lists image letters and numbers alphabetically.
    How can I copy
    the whole library still in  "Events" to an external hard drive?
    the folders/albums I have already made on to this hard drive?
    and how can I add to this back up monthly, again keeping events and folders separate and updated?
    Mac is so user friendly - there must be a way.........
    Thanks

    UPDATE : I have re-installed from disk, various apps that were no longer functioning such as iLife, iWork etc. So, I now can access my photos again.
    Also, I had to re-install all the software for my printer ( Stylus Pro 4880 ) and reset it so the printer is working again.
    Photoshop CS4 won't open. I think I will have to get in touch with Adobe as basically, I guess they have a built-in "blocker" which prevents me from opening the app as the license is for only 1 user and having re-installed the OS, there are now, in effect, 2 users ( Me and Me 1, I think ).
    So, having added on a new external HD, Time Machine has made a copy of most of the files, folders, apps etc onto the external HD. The internal HD is still nearly full ( 220 GBs out of 232 GBs ).
    I am guessing the way to go now in order to free up space on the internal HD is to delete/trash older photos from my iPhoto library and hope that if needed, I will be able to access them on the external HD.
    Am I correct ? Please advise before I do something I will regret.
    Thanks, Sean.

Maybe you are looking for

  • Managed Attachments - I/PM is not working when called from EBS

    Hi. When we click on "Managed Attachments" I/PM login screen should be populated. It was working fine before... Today, it is not working as expected. The following exception is coming in I/PM console logs... *<Dec 18, 2011 5:00:23 PM GMT+04:00> <Erro

  • How to get incoming call number in j2me

    hi all, Is there any way to get incoming call number in j2me??? thanks in advance mraj

  • Office 365 subscription - 60 minutes not included(...

    Hello, I have purchased a Windows tablet which has Office 365 subscrption including skype 60 minutes. I live in Germany.  I could not see these free minutes under Services and Products in my Microsoft account. The FAQ for the tablet says: The basic p

  • Nikon D2x and High Speed Crop

    Just an interesting observation.... With Aperture and Tiger, Nikon D2x images shot with the smaller MP High Speed Crop (HSC) mode displayed 24 extra columns/rows (depending on orientation) of pixels; thus an image that should be 3216x2136 showed up i

  • Center image on canvas

    Hi, the following code scales an image (srcImage) to a maximum size (maxSize). My aim is to center this image on a square canvas of maxSize. The existing code so far:   public BufferedImage fitImage(BufferedImage srcImage, int maxSize)     // determi