Hello Please show me how I connect my IPad to IPhone 3GS through Personal Hotspot as wifi modem?

Hello,
I recently tried to turn on my IPhone 3GS Personal Hotspot to use as a wifi modem for my IPad2 to browse web outside of my home as I normally use Internet wifi modem at home, but the IPhone 3GS does not show up the Network Name and Password and my IPad does not show up the network name in wifi section. Please show me if you know how to set up the Network and Password (Security). Thank you

iOS: Understanding Personal Hotspot
http://support.apple.com/kb/HT4517
Use Bluetooth to tether your iPhone, iPod touch, or iPad
http://www.macworld.com/article/1159258/bluetooth_tethering.html
How to Connect an iPad to an iPhone Via Bluetooth Tethering
http://techtips.salon.com/connect-ipad-iphone-via-bluetooth-tethering-25472.html
 Cheers, Tom

Similar Messages

  • How to connect my iPad and iPhone to my new apple tv ?

    how to connect my iPad and iPhone to my new apple tv ?

    Also, make sure that all devices are on the same Wi-Fi network (e.g. not on a "guest" connection), and verify the ATV settings to see that AirPlay (and HomeSharing while you're at it) are turned on.

  • How to fix iTunes 10.6 iPhone's USB Personal Hotspot problem

    I'd updated iTunes to  10.6 and iOS to 5.1 this morning and found out that my iPhone 4S's Personal Hotspot using USB was never connected. Even before updating iOS to 5.1, installing iTunes 10.6 causes the usb hotspot on iOS 5.0.1. iPhone 4S iOS 5.1 usb hotspot is still working on my PC with iTunes 10.5.3.
    Is this happened to anyone else?

    Same problem for me. iPhone 3GS running iOS 5.1 with iTunes 10.6, and I'm no longer able to use Personal Hotspot (tethering) via USB, which worked fine last week with the previous versions (iOS 5.0.1 and iTunes 10.5.3). Bluetooth tethering is fine with iOS 5.1 and iTunes 10.6.
    Some additional data points which I haven't seen mentioned yet:
    1. I'm running Mac OS X 10.6.8, so the problem is not unique to iTunes 10.6 running on Lion.
    2. I tried restarting my Mac, in case the driver installed by the iTunes update hadn't loaded correctly. It didn't help.
    3. I tried my iPhone with another Mac (also Mac OS X 10.6.8) which was still running iTunes 10.5.3 and had never used an iPhone for tethering. On connection via USB, the Mac reported that it had found a new network interface. I went into System Preferences and did an "Apply" to confirm the change to network preferences, and ensured there were no other active network connections. iPhone was listed as a network interface, with a red status indicator, and the USB tethering connection didn't work.
    Combined with evidence earlier in this thread, this strongly suggests the problem is with iOS 5.1 running on any iPhone model, and is independent of the iTunes and Mac OS X version. maclucassen's suggestion of testing tethering using an iPhone running iOS 5.0.1 with a Mac running iTunes 10.6 would be useful data for further confirmation that it is a bug in iOS 5.1.

  • I  bought an ipod touch 5 from Dubai carrefour. Th seller told me that the ipod that ı bought has a facetime . But when ı want to activate ipod ı couldnt see the facetime app. Please show me how ı could activate facetime.

    I  bought an ipod touch 5 from Dubai carrefour. Th seller told me that the ipod that ı bought has a facetime . But when ı want to activate ipod ı couldnt see the facetime app. Please show me how ı could activate facetime.

    If FaceTime is not hidden by Restrictions (Settings>General<Restrictions) you got duped. iPods officially sold in Dubai and some other countries that prohibit FT do not have FT and there is not way to get FT on those iPods.

  • I am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

    i am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

    You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

  • Hello, please tell me how to download microsoft word . Thank you

    hello, please tell me how to download microsoft word . Thank you

    As Terence said, Word is not a free program. It's part of Office 2011 and must be purchased. If you are looking for a free program that can work with Word documents, try LibreOffice:
    https://www.libreoffice.org/features/
    Regards.

  • Hello, could you please tell me how much is replacement of cracked iPhone 5 screen. Thanks

    Hello, could you please tell me how much is replacement of cracked iPhone 5 screen. Thanks

    Depends on your country
    In US
    some Apple stores will replace the screen on iPhone5 and 5C and if the service is available the cost is $149
    Where the service is not available  then an exchange iphone  price is $269

  • Please help me, How to connect my printer Canon pixma MP160 to my mac OS X Yosemite?

    please help me, How to connect my printer Canon pixma MP160 to my mac OS X Yosemite?

    You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

  • My friend uses firefox to email me. When I open email it seem to me that firefox blocks my Gmail. So I cannot access my gmail inbox any more. Please show me how to debug this.

    My browser is IE9. While I read my friend mails that are sent through Firefox. Suddenly I received an error message "Bad request error 400". Now I cannot access my gmail inbox anymore. I don't know what to do now. Please show me how to debug this so I can go back to my gmail because there are a ton of email in gmail inbox. Please help!!

    The following relates to inbox problems in GMail in Nov 2011, no error 400 was seen, only a blank area where the message should have been. Since two people tied into this message this week I think theirs may be a need to update Adblock Plus filters per question [https://support.mozilla.com/questions/896267 896267]

  • Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface.

    Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.

    Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
    Also make sure you close all other applications except Logic to ensure it is not running in slave mode...

  • Hello please tell me how you can unlock the phone I bought İclod worker can not find the old vledeltsa. sorry English is not good, I know

    Hello please tell me how you can unlock the phone I bought İclod worker can not find the old vledeltsa. sorry English is not good, I know

    If it's locked to the previous owner's account then only he/she can remove it from their account : http://support.apple.com/kb/TS4515

  • I have been with google for while now but I still can't access to google wallet, Would you please show me how? thanks

    I HAVE BEEN WITH GOOGLE FOR WHILE NOW BUT I STILL CAN'T ACCESS TO MY GOOGLE WALLET, BOTH ACCOUNTS, PERSONAL AS WELL AS BUSINESS. WOULD YOU PLEASE SHOW ME HOW? THANKS

    Seems like that would be a better question for a Google forum since it it Google's app. Here is a link about it from Google:
    https://www.google.com/wallet/
    If you need further help, I would suggest you post to a Google forum.
    GB

  • Can someone PLEASE show me how to Create a play list on a ZEN TOuch

    )ok from what i see so far i go on the player i select the track i want.
    2) Then i go too create play list and name the playlist
    3) But when i go to add other songs i witness 2 problems
    a) It saves all the songs for that artist
    b) it ask too override what was in the play list so i lose the songs i saved before?
    4) What is the whole point of the select as is button?
    Can someone please show me how to make a play list on the player not the media source....

    I don't mean to bump this after over a month, but I just found it with a search. I agree... playlist creation seems like it would be such a simple thing... and they make it so hard.
    Would added playlist function be able to be upgraded through firmware?
    It seems like along with the "Add to selected", there could be an "Add to playlist" thing you could click, then it would ask which plalist you would like to add it to. That way, even from the 'Now Playling' listing, you could add a song that's playing right now to any one of your playlists. Or you wouldn't have to interrupt what's playing to add a track in the library.
    The Zen software is pretty terrible too... you can't even easily arrange your playlist. You have to drag the tracks. I can't just click something like "Arrange playlist by artist" or anything. It's crazy.
    I love that you can do playlists... a lot of players don't even have this feature. But it seems like they could easily make it more... well... easy for us.
    For a software solution, I've found the Zen Winamp plugin to be by far the best thing for making playlists. It's great!
    - Darin

  • My laptop quit so how do I connect my ipad and iPhone to the new one and make it work?

    My laptop quit so how do I connect my ipad and iPhone to the new one and make it work?

    Hello Tamthom,
    It sounds like you would like to sync your phone to your new computer. I would start by using the following article to transer your iTunes and App Store purchases to your computer from your phone.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/ht1848
    Note: If you had content that was not purchased from the iTunes Store you will need to re import the content from its original media, to your iTunes library separately.
    Then backup your device to iTunes with this article:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    After your puchases are transferred, and your device is backed up you can Erase and Sync the device, and restore your backup to it, that way moving forward you can sync it like you used to.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705. E

    I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705.
    Everytime I restart the computer now I get a open with window.
    When I select Notepad and open it I get
    0x54c  Noswal\.android\adb_usb.******
    How do i undo that.
    If it helps the Article ID:474705 this says at one point
    3. Open a shell prompt and enter the following command: echo "0x54c" >> $HOME/.android/adb_usb.******.
    I gues that's what's creating the problem.
    Please help.

    Hi elishacuthbert.
    Try disabling the start-up items in your computer to troubleshoot the issue. Follow the steps mentioned below:
    Right click on the Taskbar > Task Manager > Start-up > Select the applications > Disable.
    Note: If my post answers your question, please mark it as an "Accepted Solution."

Maybe you are looking for