Hello Problem with my DCIM pictures files of my Iphone 4

Hello
I have a problem with copying pictures taken with my Iphone 4 on my PC; since the change of IOS version apparently, the structure of the Iphone pictures files has been changed in the DCIM files.
The subfiles are not anymore classified by dates but according to "strange" subfiles with names such as "815KMYLY" or "965YOKDJ" dated all with the same dates giving no indications of which pictures are included inside each of them.
Which means also a large problem to find where are your latest pictures you want to save.
Do you know how I can go back to the previous structure of my Iphone 4  DCIM files to unable me to copy and paste my very last pictures on my PC ??
Thanks a lot for your help.
BOGAERT

You should be importing your pictures to the computer. That is why they have a program that runs on the PC in Windows to do that. It knows what to import based on what has already been imported. When you plug the phone into the computer, it should come up automatically like a digital camera,or you can go to My Computer like you are, and instead of opening it, right click and select Import photos. There will not be a change to the file structure, and you have no access to that portion anyway.

Similar Messages

  • Problems with sending/receiving picture messages

    Does anyone know how to sort problems with sending/receiving picture messages on the iphone 4S?  I've gone through all the re-setting etc at the place I bought it and it still doesn't work!! Spoken to 02 and they said it's an issue with Apple software?? Any help appreciated.

    Can you send/receive SMS's? If so, and you can't send/receive MMS's, and MMS is turned on in Settings, 99.9% of the time the problem is on your carrier's end...most likely MMS is not provisioned properly on your account, regardless of what your carrier is telling you. Call back & have them remove MMS from your account & then re-provision your account for MMS.

  • I have 2 iphones syncing on one computer and on the same apple ID. Before i updatad my Itunes to the last available update and my Iphones to 5.01 i had no problem draging jpg. and mp3 files into my iphones DCIM folder (the picture folder that opens when c

    I have 2 iphones syncing on one computer and on the same apple ID.
    Before i updatad my Itunes to the last available update and my Iphones to 5.01
    i had no problem draging jpg. and mp3 files into my iphones DCIM folder (the picture folder that opens
    when conecting to Itunes). Since my updates Itune wont let me drag and drop any files' even pictures that
    were taken with my Iphone on 4.3.3.
    Please help as we have no itunes music in Israel, only apps and i cant copy any of my old music from my computer
    to my iphones.
    If it helps, i am using a pc with 32 bit windows 7.
    Other from the obove Itunes works fine and does sync pictures from my computer to my Iphone from "my pictures" folder.
    Thank you for your time
    Yoni Bliss
    [email protected]

    The title of my initial post is a bit misleading. I already took a chance deleting one of the iPhones, hoping if I deleted the wrong one, I can still reauthorize it (all with the same Apple ID acct, so not subject to 90-day waiting period, right?) The iTunes database just updated itself, and it says I have 4 "devices" "in the Cloud", but 5 "computers" associated w my account. How can I find out what computers are associated? Isn't there a list I can see? I dont have a clue what computers they might be. If I use the  "Deauthorize All" option, is it a pain to add them all back in. I assume I would have to log in from each computer to reauthorize each one. Would I have to be running the newest OS or version of iTunes to reauthorize? I think I have a PowerBook G4 Titanium with an older OS and iTunes. I'd like to keep that authorized, if possible.

  • HT204382 Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no d

    Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no diference

    Download and install the free VLC for Mac - that should work:
    http://www.videolan.org/vlc/download-macosx.html

  • Problem with Preview and PSD files - random gray square

    Hi guys, hope you can help...
    I've got a problem with Preview and PSD files.
    If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
    If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
    I've tried the same psd on my older iMac with leopard...and got no problem at all.
    I suspect it got something to do with my Ati...
    (this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
    Thanks for your help.
    DAve.

    maybe I'm onto something...
    I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
    It seems like the i7 is much faster than the Ati....
    Any more realistic ideas?

  • Problem with Append mode in File Receiver

    Hello,
    I am facing some problem with Append Mode in File Receiver.
    In channel config, i have given :
    Construction Mode : Append
    File Type : Text
    Message Protocol : File Content Conversion
    The size of the file which i am trying to send is about 9.5MB.
    I got this error,
    "Recovering from loss of connection to database; message
    loaded into queue by recover job: System Job (Failover Recovery)".
    So, it would seem that there was a loss of connnection to the database    
    while the file was being written.
    Note -  XI successfully recovered from the connection loss and   
    successfully wrote the file, however since the communication channel  
    was set to append, it appended to the partial file that was written   
    before the database connection loss. This is not correct. The file    
    should have been overwritten after the recovery even though the communication
    channel was configured to append.                                     
    Can anyone help me on this regard.
    Thanks,
    Soorya.

    Hi Venkat,
    I would suggest u to split the file in to chunks if u face any problem in processing at a time in append mode and also
    Memory Requirements are must 4 processing huge files:
    Q: Which memory requirements does the File Adapter have? Is there a restriction on the maximum file size it can process?
    A: The maximum file size that can be processed by the File Adapter depends on a number of factors:
    o The most important one is the size of the Java heap, which is shared among all messages processed at a certain point in time. In order to be able to process larger messages without an out of memory error (OOM), it is recommended to increase the size of the available Java heap and/or to reduce the concurrency in the system so that fewer messages are processed in parallel.
    o Another factor negatively influencing the maximum message size in releases up to and including XI 3.0 SP 13 is an enabled charcter set (encoding) conversion if the message type is set to "Text".
    o Using the transport protocol "File Transfer Protocol (FTP)" also uses more memory for processing than the transport protocol "File System (NFS)" (up to and including XI 3.0 SP 13).
    o If the Message Protocol "File Content Conversion" is used in a File Sender channel, consider that not only the size of the input file affects the File Adapter's memory usage, but even more the size of the XML resulting from the conversion, which is usually a few factors larger than the original plain text file.
    To reduce the memory consumption in this scenario, consider configuring the setting "Maximum Recordsets per Message" for the sender channel. This will cause the input file to be split into multiple smaller mesages.
    Plz do refer the following links:
    U may plan the availability of ur communication channel using "Planning Availability Times" feature
    http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
    /people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
    hi check the below links for reference
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10748ef7-b2f0-2910-7cb8-c81e7f284af5
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7086f109-aaa7-2a10-0cb5-f69bd2affd2b
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cc1ec146-0a01-0010-90a9-b1df1d2f346f
    Regards,
    Vinod.

  • I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    Is the menu bar missing (the one containing File, View, Edit etc)? If it is, the following link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing

  • I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

    I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

    Hi Arika,
    The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
    All these drivers are available for downloading on ni.com. To get the drivers, go to ht
    tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
    I hope this information helps.
    Best Regards,
    Wilbur Shen
    National Instruments

  • Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

    Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

    More information about this issue can be found here:
    https://forums.adobe.com/thread/1672655
    A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
    Then download each of the individual updates and run them sequentially. 
    I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
    You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
    http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
    Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
    Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
    Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
    Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
    Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
    Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
    Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
    Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
    Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

  • Problem with RTPExport output video files

    Hi, I have a problem with RTPExport output video files. One side streams H263/RTP(AVTransmit2.java) and other write this steam to a file by RTPExport.java. When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Pls how can I achieve output file that will have the same fps like original one? How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Its there a way to modifi rtpexport or avreceiver to do this? Thanks a lot!

    Trubka wrote:
    When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Okay, first off, the second file is smaller on purpose. RTP intentionally drops packets that are old/out of order in order to make sure real-time video stays as close to real time as it can. This is by design, so there's really nothing that can be done about it.
    How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Technically speaking, what you're getting in the RTPExport is exactly what you got on the receiving end. Any frames that are dropped during transmission will not be seen by the receiver, nor saved by the receiver.
    Pls how can I achieve output file that will have the same fps like original one? I'm not 100% sure that you can, but, you can give the following idea a try. I make no guarentees that it'll work, but it should work for you...
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]
    That example is an example of a "custom transport layer" for RTP connections. Essentially, it's some code that's handed the RTP packets on the transmission end, and it's expected to deliver those RTP packets on the other end. And it doesn't care about how they get from A to B, only that they do.
    If you were to replace the UDP socket in that example with a TCP socket, you would be guarenteed not to drop packets due to network reasons. Every RTP packet you were handed by the transmitter, you would then hand to the receiver. There is no guarentee that none of the packets would be cast away as "old" by the RTP protocol itself, but there's also no guarentee any of them would be. It's a crap-shoot at best, but it's certainly worth a try.

  • A problem with importing layered PSD file into Flash

    Hi.
    There's a problem with importing layered PSD file into Flash.
    If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
    If the higher layer has brush or transparent effects, it becomes worse.
    Any help with this problem?
    Thanks.

    How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

  • Problem with Snow Leopard and file sharing

    I mostly work at home where I have an 18 months-old intel iMac 24'' running Leopard and an older iMac G5 20'' (PowerPC) running Tiger. Besides, I have a three months-old MacBook Pro 17" in which I recently upgraded the system to Snow Leopard.
    Before this upgrade I never had a problem with the sharing of files between the three computers (I have them connected via Ethernet and a 5-port D-Link router wich provides flawless internet connection to the three computers). However, after the upgrade it has become impossible to connect the MacBook to the iMac G5 or vice versa via afp. Besides, getting the MacBook to connect to the (Leopard) iMac 24'' is frustratingly slow in either direction.
    A related problem is the fact that after the upgrade the portable is no longer capable of seeing directly my ethernet-connected laser printer (to one of the ports of the D-Link router) although... surprise! it does see it as a shared printer in the iMac G5 and this way it prints alright.
    Any ideas or suggestions to explore the cause of or solve this problem are warmly welcome.
    Emilio Faro

    Same problem here, did you find a solution?

  • Problems with mp4 (h.264) files, colour desaturated.

    Hey guys. I've been having problems with mp4 h.264 files (not quicktime h.264). When playback on windows media player and windows classic media player it looks terrible. the saturation are weird (espesially on colours like yellow and red) and there seems to be this weird blur on the image. For so long I thought there was problem with the export from Premiere Pro, today however when playback on Quicktime player or VLC player it matches the orginal. I exported the file through premiere pro. I don't know what the problem is, maybe it's just the playback on windows media player and window classic media player.
    Playback on quicktime
    Playback on media player
    Can someone tell me what's going on?

    When playback on windows media player and windows classic media player it looks terrible. the saturation are weird (espesially on colours like yellow and red) and there seems to be this weird blur on the image... when playback on Quicktime player or VLC player it matches the orginal...
    On the contrary, with more than high probability playback in QuirkTime shows you wrong colours because of its crooked colour management.
    How do you judge on colour matching between your source file and what you see in media players?
    What is your spec and GPU in particular? Do you use any sort of colour management in its settings?

  • I've switched from Google to Firefox because I was so tired of Google crashed all the time. Now I have the same problem with Firefox, Bank id, file down

    Hej!
    I've switched from Google to Firefox because I was so tired of Google crashed all the time. Now I have the same problem with Firefox, Bank id, file downloading, accessing Web pages, none of it works. What is the error?
    Ronnie.

    When Firefox crashes, it usually records information about what was happening at that moment and displays the Mozilla Crash Reporter. Are you seeing that, or is Firefox just freezing and you're killing it?
    Assuming you have crashes, you can submit that data to Mozilla and share it with forum volunteers to see whether it points to the solution. Please check the support article "[[Firefox Crashes]]" (especially the last section) for steps to get those crash report IDs, and then post some of the recent ones here.
    If that's not possible, have you tried Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    Not all add-ons are disabled: Flash and other plugins still run
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference?

  • How can I debug a problem with the 3g data connection on my iPhone 4s?

    This question didn't get any answers in the "Using iPhone" forum. Thought I would re-ask here. Note, I had to reset the network again today 2 days after the last reset:
    I've been having intermittent problems with my 3g data connection on my iPhone 4s on ATT. Whenever this happens I see full bars etc, but can't browse from safari or get any data in other apps. My wife's iPhone 4 right next to me has no issues at all. Switching on/off airplane mode and turning off/on Cellular Data does not help. The only thing that helps is resetting the Network Settings or hard restarting the phone.
    I figured my problems were hardware related so I took my phone in for a replacement the other day. Things started out fine but after I upgraded it to 5.01 and restored my backup and now I am back to having the same issue today. I assume the issue is with something coming from my backup / restore but is there any way for me to pinpoint what could be causing the issue. I have a lot of apps, I'd rather not have to reinstall and set them all backup manually, but I would if I knew that would fix the problem... but for all I know one of the apps could be causing it.
    Anyone have any logs I can check or testing I can do on my end?
    Thanks!

    Unfortunately, Apple does not make any logs available to the average schmoe (like us) for networking, kernel dumps, or anything else (assuming, of course, it is not jailbroken).
    Your best bet is to take it back into the store. Ask them to look at the notes in GCRM regarding the last time this occured, then explain after upgrading to 5.01 it is occuring again. Then ask them for a phone swap since it is a reoccuring issue and doesn't sound like an OS/SW issue. Good luck!

Maybe you are looking for