Hello, "problom" with my MSI Cd-Rw

Processor –
Intel® Pentium® IV 2.8Ghz 800Mhz FSB 512K Cache HT
      M-Board –
MSI© 875P Neo FSI2R MS-6758
Ram –
256MB DDR-SDRAM PC3200 400Mhz * 2
Video Card –
Power-Color  Radeon  9800Pro 128MB DDR
Hard Disk –
Western Digital 80GB 7200RPM 8Mb Buffer
Chassis –
Yeng Yong CR-1298 – 2 120mm fans(very loud!) 300W p.s
Drives –
MSI 48* DVD
MSI CD-RW 24/52/24
Hello to all of u , im new here- and i have a "problom" with this MSI Cd-Rw:
http://www.msi.com.tw/program/products/optical_devices/dvs/pro_dvs_detail.php?UID=500
When i turn on the computer and everything goes like it should(no crashes or stuff)
I noticed that the cd-rw is suddnly openes and then closes itself!
And when the computer is turned on and something is wrong the cd-rw doesnt open!
Its not exactly a problom but it kinda botheres me

Quote
Originally posted by Raven_
because you are pushing the psu very hard and when it fails NOT IF when it can take the entire computer with it.
you have spent much money on equipment and use cheap psu.
not good.
Quote
And when the computer is turned on and something is wrong the cd-rw doesnt open
could be that there aint enough power left.

Similar Messages

  • Hello I have problome with YouTube on my apple tv. When I add playlist on my Mac I can see the movies and play them but I can't see the movies on my appletv only the name of the playlist and I am can't watch the movies. Anyone know the problome? Please..

    Hello I have problome with YouTube on my apple tv. When I add playlist on my Mac I can see the movies and play them but I can't see the movies on my appletv only the name of the playlist and I am can't watch the movies. Anyone know the problome? Please..

    Geesh - all this information and no  one has any clue to this? Not even someone from Apple?
    Can someone at least point me in the right direction?

  • I want to replace a MS-7646M1 with another MSI motherboard

    Hello,
    I want to replace my MS-7646M1 (Medion) motherboard with another MSI motherboard, does someone knows the best replacement with te same connectors (front panel)?
    Manual of the motherboard: http://www.medionowners.be/downloads/0MB_MS7646%5B1%5D.pdf
    Thanks
    KingWolf

    If you're using the existing case, then any MSI m-ATX Socket AM3 board will fit, and you should be able to use your existing CPU and RAM. But be warned, these Medion PCs usually come with junk PSUs, so you may want to replace that also.
    Better to just buy a new case, then you can use any size board and PSU you like.

  • Hp p6230it with a MSI MS-7613 (Indio) can i use a Nvidia Gtx750ti ?Bios problems?

    Hello,
    I have an Hp Pavillion p6230it with a MSI MS-7613 (Indio) motherboard, the stock GPU is gone, continues to blackscreen and goes over 100 degrees. I love this product and wish to do an upgrade with a CoolerMaster power supply(600w) and a a Nvidia GTX750TI but I'm worried about compatibility and bios issues( a friend tried this on a different HP desktop and he got to replace the motherboard).Called HP italy to have infos and they told me that they cannot say anything to help me...anyone can help me here?Thank you so much

    The power supply unit (PSU) should work fine.  However, the video card may cause you problems.  I believe that all of the GTX 750 ti cards require UEFI in the motherboard, instead of the standard BIOS.  I suggest deciding which manufacturer's video card you want to buy and contacting their Tech Support to assure that it will work in your computer.  This is the best way to save yourself problems.  They will need the Specifications of your computer.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Problem with apple installing with itunes.msi in windows 7

    At the beggining my computer showed an error with itunes.msi and I tried to fixed the error. Then I tried again to install the itunes but now itunes say that the program cant be installed. Can somebody help me??? Thanks

    Hey vic22,
    Sylvia is correct -- the 9174 has been thoroughly tested on the USB 2.0 standard.  But we still expect it to communicate properly with USB 3.0 ports.  We have seen a few cases in which specific host controllers cause unexpected behavior similar to what you describe, but in general, our USB devices are compatible with USB 3.0.
    Of course, if sticking with a 2.0 port works for your application, that will be the quickest/simplest recommendation that we can make.  If you need to move your cDAQ to a 3.0 port, let us know -- there are some troubleshooting steps we can take to figure out why you're seeing errors.
    There are some additional details in this somewhat related article.  Upgrading the drivers for your USB Host Controller might be worth a shot.
    Kyle B  |  Product Support Engineer  |  ni.com/support

  • Is there any way to open a file with a .msi extension on my new mac?

    I have Camtasia from the pc I was using. It has a .msi file extension for the installation file. Is there any way to open the Camtasia installation file with the .msi extension on my new Mac?
    Thanks,
    Jerry

    That's a Microsoft program which requires Windows. You could run on your Mac if you install Windows on it.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows 7 or Windows 8.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Hello, starting with today I have a strange problem: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

    Hello, starting with today I have a strange problem with Final Cut Pro X: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

    Here`s the screenshot.
    But anyway:
    The drive is Makintosh HD from my Macbook and it is shown in the event mediathek and in the projects. Since I`ve recognized this problem I installed FCPX again and consequently the event and project directory created by FCPX is where it should be and it shows all the test events including it`s files.
    So what happens? Opening FCPX you see only one event and that a new empty event. All previous events are not shown there even if you can see them in the finder. So if you import again the clips they are in this new event library. After closing correctly FCPX and reopening there again is nothing than an new and empty event. What it does is that it recognized that i.e. there are events with previous numbers and so it creates an new one with the next available counting number.
    If you want to open one event from the finder it by clicking to the file it opens FCPX but it says it cannot open the clicked file.

  • Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?

    Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?
    My client requirement is process 100 files  from biztalk with in 5 min ,actually it is taking 20 min .
    So I decided to created same instance of the application with multiple time in BTS admin console ,as I understand biztalk admin console never allow to install same
    schema’s with multiple  time .
    Any help can be  appreciate ..

    BizTalk will automatically process multiple messages on separate threads so you may need to tune your system. The following link should get you started:
    http://social.technet.microsoft.com/wiki/contents/articles/7801.biztalk-server-performance-tuning-optimization.aspx
    Another possibility is to set the Batch Size property on your receive location if the adapter uses batch size to determine how messages are picked up.  As an example, it you want  the MSMQ adapter to immediately pick up messages and start
    to process them, set the batch size to 1.
    You may also need to distribute the processing across multiple BizTalk servers by installing BizTalk on additional servers and joining the existing BizTalk group.
    David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.

  • After installing 1.5 with the msi, can I then zip it up and use it...

    After installing 1.5 with the msi, can I then zip it up and use that version on another computer? I've done this successfully already for my needs etc. Just not sure if this was "kosher" etc.
    I've installed Java JRE/JDK 1.5 using:
    jdk-1_5_0_12-windows-i586-p.exe
    I installed it on computer A at C:\jdk1.5.0_12. I then zipped it up and ran it successfully on computer B for my Tomcat service needs. It went seamlessly. However, did I over look any risks doing it this way. I did it this way because the MSI prompts a user for a install path. I need it for both the JRE/JDK to use C:\jdk1.5.0_12. Zipping up my installed version prevents that pesky user-error stuff/support tickets due to user error stuff.
    Granted, I'd rather have users fill out a support ticket due to a typo then erroneously think I was successful at repackaging Java for our needs etc. Follow?
    And therefore, was it ok to zip it up and port it?
    Thanks a lot for your time and help. Truly appreciated!
    Jeff

    JyefuDCJS wrote:
    After installing 1.5 with the msi, can I then zip it up and use that version on another computer? ...No. It will fail on Macs and Unix/Linux (don't know, don't care about other Windows boxes).
    [Java Web Start|http://java.sun.com/javase/technologies/desktop/javawebstart/index.jsp] *(<- link)* is a better alternative for installing (and updating) Java apps. JWS works on all OS' for which there is a JRE.

  • What's with the MSI support?

    I bought a MSI-K8N Platinum about 6 weeks ago and since that day I've had nothing but trouble with my wireless network. As I'm not one of those who gives up instantly I figured that I might solve the (what seems to be software)-problems on my own or at worst with the guidance of MSI:s cunning support. It seems that I was severly mistaken though.. I've posted in two threads in this very forum without any answer and I've mailed the MSI support concerning my issue without any luck. Now it seems that my hard work has payed off with a mainboard that it's too late to reship and with an useless wireless network that cost me another 200$ of my hard earned student-salary.
    When can I hope to get an answer to my questions? Or any response at all for that sake?
    Here's links to the threads concerning this issue:
    https://forum-en.msi.com/index.php?topic=66928.0
    https://forum-en.msi.com/index.php?topic=25278.0
    Furthermore I'm still waiting for the support to contact me. I would very much like to get to use my high-end equipment before it's yesterdays news...
    Sorry if this thread makes me come of as a b**ch, but it seems that I'm not getting attention with this matter of mine. I'm sure the support and this forum is an excellent node for other concerns.
    // Klab0

    In Reply to syar 2003:
    I've already had my wireless network for a while and it (still) works perfectly with my old Abit m0b0. It consists of a D-link DWL-G520, D-link DWL-G650 and a D-link DI-624 accesspoint.
    In Reply in general:
    I've tried with belkin for my workstation but it seems to be in conflict with my other D-link products. Hence I don't want to mix network brands because as you say, they usually has quite poor compability, and for another thing I would like to be able to use the "boost"-functions available when using all D-link Etreme G products (Extended range and "108Mbs"). It seems quite odd to me that pretty much every D-link product except my DWL-G520 is supported by my mainboard, and since I know for a fact that there's nothing wrong with the card I'm led to beleive that the problem has something to do with my software configuration.
    Problem specifics:
    I've updated to the latest mainboard and ethernet drivers for my mainboard, I have NOT installed digicell though since I figured it would be messy with two separate programs trying to configure my wireless network. I've deactivated the firewire, GbLAN and ethernet in the BIOS without any result. I've tried with the PCI-card in PCI-slot 5 and 4 (the orange one optimized for wireless networks and the one next to it.) The system seems to find the card with the right drivers and it seems to work perfectly except for one thing: I can't achieve contact with the acesspoint.
    In one of the threads i hijacked the person who made the thread said that he solved the problem, so I'm still hoping to work this thing out somehow. What I'm really wondering is if there's some basic mistake (a BIOS-setting etc) that often comes up as a problem for lamers like me when setting up a wireless network with this mainboard. I will try with the MSI wireless PCI-card that came with the mainboard if I can't solve it with my existing DWL-G520, but it is really a pain in the a** since I suppose it will only lead to compabilityproblems with the acesspoint instead.
    If anyone has a slightest clue, please don't hesitate to mention it. It might as well be something very basic that has been overlooked. Thanks guys.

  • TS3074 Hello anyone with Windows 7, not sure why having followed instructions above, install of latest version of itunes won't work and can no longer open old version either.  anyone help with this?

    Hello anyone with Windows 7, not sure why having followed instructions above, install of latest version of itunes won't work and can no longer open old version either.  anyone help with this?

    Hi,
    thanks for your reply.
    Yes, except n°1 - empty Temp directory, I had tried/checked all of those.
    I emptied the local temp folder tonight, but it still won't work.
    Please note: the installation doesn't give me any problem. The program was working fine, until at one point *plouf* it stopped working. I can re-install it without any problem, it just crashes when opening.
    \\edit\\ I seem to have located the problem, it's in the library files. If I re-install iTunes without my library, it works fine (though there is no music in it, yet). As soon as I import my library, or replace the My Music\iTunes folder with the old one, it stops working.

  • Having trouble with itunes update.  Error with itunes64.msi. Windows 8.1 64 bit.  Thanks.

    Having trouble with itunes update.  Error with itunes64.msi. Windows 8.1 64 bit.  I tried uninstalling, but I am stuck now trying to reinstall.
    It says itcan't find the itunes64.msi destination folder.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • System with exclusive MSI items problems

    Hi,
    I've bought a system built with only MSI items from Comrace Computers Romania (so it's very easy for you to reproduce the problems).
    System is:
    1. Mb - MSI 865 PE Neo2 FIS2R
    2. VGA - MSI FX - 5600 - VTDR 128
    3. TV Tuner - MSI TV @nywhere Master (with FM Radio)
    HDD is a Seagate 80MB 7200. RAID, SATA etc. are disabled.
    CPU is 3.06 with FSB 800
    1 GB DDRAM 400 dual channel mounted.
    Drivers, bios and applications are uptodate as of yesterday, 4th of august 2003 h 17 pm GMT+2, from msi site with liveupdate 3 (including multimedia center patch).
    Operating system is WinXP SP1 with all updates from winupdate also as of yesterday.
    I have troubles with both remote controls (from vga and tv tuner).
    There are 2 applications (both related to remote controls) that freezes the system: WinCinema Manager Application and WinIRXhelper.exe.
    Also I suspect a conflict between the 2 tvtuners (MS-8606 and vga wdm).
    TV @nywhere is set PAL-B Germany (settings for Romania - frequency table - are not functional).
    I've spent about 50 hours installing, reinstalling (also the operating system beginning with fdisk), checking every piece of software (drivers and applications) and now I have a somehow functional system with these settings:
    MS-8606 drivers from delivered CD
    Nvidia WDM 2.03 drivers from MSI, universal capture, tvtuner and crossbar disabled (tvaudio cannot be disabled, the system crash in blue screen).
    Nvidia 44.03 drivers from MSI
    Multimedia Center with patch
    Intervideo Windvr MSIPVS from delivered CD
    Wincinema manager and WinIRXhelp.exe disabled (not loaded at startup - if anyone of them are loaded, Intervideo Windvr msipvs and/or Multimedia center freezes at start, and sometimes the system freezes imediately after reboot, when loading one of these applications).
    The remote control from VGA card is working with IR receiver connected to tvtuner socket, but only inside Multimedia Center, but no way with intervideo windvr standalone (and for some reasons, i'd like to use it with windvr).
    I also suspect a conflict between one of the motherboard's items and the remote control function (but i've tried settings in bios with all the additional items disabled, usb, 1394, etc.)
    1. First question: any chance to have a better MS-8606 driver, with correct tables for PAL-B/G/D/K, Romania, Germany etc., with better image quality, and very important, with a clean uninstall, in order to be able to further debug conflicts if any.
    2. Second question: any chance to have a stable system with remote control function in multimedia center AND WinDVR AND WinDVD (standalone applications delivered with FX-5600).
    3. Where the hell is the conflict that freezes the system when loading wincinema manager and/or winIRX ?
    Thank you in advance,
    Costin

    OK, now I'm pretty sure the main problem is the tvtuner, drivers to be more specific (ms-8606 and remote control dlls).
    If I let nvidia wdm capture drivers enabled, the remote control isn't working anymore. But if nvidia wdm are disabled, in multimeda center you cannot scan tvtstations anymore  (the system freezes 8o - soooo funny).
    So, if anyone spent money on this tvtuner, and have fx-5600 vtdr128 video card with capture drivers, the solution is:
    1. install both ms-8606 AND nvidia wdm drivers
    2. install and configure multimedia center (with patch applied before any attempt to configure it) and intervideo windvr msipvs - VERY IMPORTANT: disable Wincinema Manager AND WinIRXhelp.exe from startup, imediately after installing windvr and multimedia center, and leave them disabled for good (with msconfig for example).
    3. scan for tvstations
    4. now disable nvidia wdm drivers (universal capture, tvtuner, video crossbar, tvaudio crossbar cannot be disabled)
    5. you have now a somehow stable system, with remote control working only inside multimedia center

  • Help with the MSI 645 Ultra!

     I've got a very frusturating problem. I just bought the MSI 645 ultra mobo to upgrade my system, along with a brand new P4 2.0 GHZ processor and 512 mb DDR ram to go onto the board. My problem is as follows: The computer is not booting up. No OS, no BIOS, no nothing. When I turn the power on and hit the switch, all the hardware in the case starts up and sounds fine... but the screen remains blank. All four lights on the little diagnostic tool/usb port thingy that came with the board stay red, which, according to the manual, indicates a problem with the processor.
    The processor is either bad (highly unlikely with it being an Intel chip) or for some reason its not working with the mobo. So, heres my question: Does an Intel P4 2.0 GHZ Northwood processor work with the MSI 645 Ultra?
    Under the list of supported speeds, 2.0 ghz is not listed ?( . Can anyone tell me whats going on here?

    Quote
    Originally posted by Confused_Bystander
     I've got a very frusturating problem. I just bought the MSI 645 ultra mobo to upgrade my system, along with a brand new P4 2.0 GHZ processor and 512 mb DDR ram to go onto the board. My problem is as follows: The computer is not booting up. No OS, no BIOS, no nothing. When I turn the power on and hit the switch, all the hardware in the case starts up and sounds fine... but the screen remains blank. All four lights on the little diagnostic tool/usb port thingy that came with the board stay red, which, according to the manual, indicates a problem with the processor.
    The processor is either bad (highly unlikely with it being an Intel chip) or for some reason its not working with the mobo. So, heres my question: Does an Intel P4 2.0 GHZ Northwood processor work with the MSI 645 Ultra?
    Under the list of supported speeds, 2.0 ghz is not listed ?( . Can anyone tell me whats going on here?
    ANy beep?

  • Msi GTX 770 lightning compatability with an msi 990xa-gd55

    Soon I will be upgrading my pcand cant be sure from my research that the msi GTX 770 lightning is compatible with the msi 990xa-gd55 motherboard.  So I thought I'd ask for a proffesional opinion.  Thanks

      You're welcome!

Maybe you are looking for