Hello, sombody knows how to start MS Excel from LabView (version 8.2)? Thanks

Hello, sombody knows how to start MS Excel from LabView (version 8.2)? Thank you in advance.
Regards Robert

In the example finder  ">Help>Find Examples >>search for Excel", you'll find a sample program called "ActiveX Event Callback for Excel".
It opens the Excel Application..  You can build on this to open/create new worksheet(s), etc.
RayR
Message Edited by JoeLabView on 06-20-2007 08:21 AM
Attachments:
OpenExcel.PNG ‏34 KB

Similar Messages

  • How to convert llb from LabVIEW version 8 to 7.1

    Can someone tell how to convert the llb from LabVIEW version 8 to version 7.1?
    I hope to sent the program to the others, but the other side are using LabVIEW version 7.1 but not version 8.0.
    I know I can save to VI file as previous version, but it contains severals of VI in the library, it is quite time consuming.
    Can everyone sugguest any method or solution to solve my problem.
    Thanks.

    Hi anson,
    it will run also in LV7.1 - but you should check those warnings (probably things not/differently supported by LV7.1...) anyway!
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Hello, I would like to know how I can open a file without downloading it? Thank you

    Hello, I would like to know how I can open a file without downloading it? Thank you

    matrix wrote in message
    news:[email protected]..
    > I tried that, attached is the vi.
    > My actual aim is to allow data to be plotted to the graph 4 24 hours,
    > after which, it should clear the chart and start at the beginning
    > agin.
    > Does this vi do this.
    No. The attached is the simplest way of modifying it to do as you want. I've
    sped things up a little to make it obvious.
    > Will the array be able to keep all the data, is there a way i can do
    > it without arrays, i.e. kind of dynamically, and therefore try to save
    > memory usage.
    You already are. You're making the arrays as you go along so only the memory
    needed for the data that's in the plot is in use at any one time. To do it
    without storing
    arrays at all you'd need to keep retrieving the data from
    the XYgraph, adding the new datapoint and writing it back. Messy and I
    suspect incredibly inefficient.
    You're going to use the memory in any case- a better option would be to
    pre-initialise an array and fill it slowly. At the end of each 24 hour block
    zap all the data and start again without destroying and recreating the
    arrays. Or if you're only doing the 24 hour wipes to save memory, simply
    start again at the start of the buffer woithout erasing the previous data
    and you always have 24 hours of data to liik at once the system's running.
    Do a search for keywords like "pre initialise" or "circular buffer" on
    ni.com
    [Attachment xy-time_modified.vi, see below]
    Attachments:
    xy-time_modified.vi ‏51 KB

  • My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this. I updated both windows and iTunes.

    My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this? I updated both windows and iTunes.

    Work through all the suggestions in this Apple support document first.
    iPod: Does not appear in Windows or iTunes and Device Manager is empty
    B-rock

  • I want to bring my iTunes and content from a Windows PC to my new MAC mini and dont know how to start

    I did find the migration assistant on the MAC but no counterpart on my PC.
    Therefore I don´t know how to start.
    I found the
    www.apple.com/migrate-to-mac
    page.
    I think this will help with the migration assistant for Windows

    Move iTunes Library from PC to MAC
    http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html

  • Hello anyone know how to use the locked iphone outside USA

    hello anyone know how to use the locked AT&T iphone 5 outside US. I'll go to Japan. Don't know if the phone can be used there.any idea will be appreciated.

    You'll need to get it unlocked by ATandT to avoid paying huge roaming costs.
    See: http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820

  • Hello, i got an ipod nano 5 gen, anyone knows how to sync the contacts from my macbook. thanks

    hello, i got an ipod nano 5 gen, anyone knows how to sync the contacts from my macbook. thanks

    Hi there,
    I would recommend taking a look at the information found in the articles below. The first two articles have the same content, but are geared towards either OS X or Windows.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12113
    How to use multiple iPhone, iPad, or iPod devices with one computer
    http://support.apple.com/kb/ht1495
    -Griff W.

  • I need to copy and paste as I am loading content onto my website through an online user panel, I dont have the know how to start re-writing coding as the help message stated when I try to copy some text, is there a simple solution to this task?

    I really need to copy and paste as I am uploading content onto my website through an online user panel, I dont have the know how to start re-writing coding as the help message stated when I try to copy some text, is there a simple solution to this everyday type task? Thanks in advance. Mark in Cheshire.

    kaymarhar wrote:
    Because it took me AGES to manually configure the text to wrap around my little pig friend there and I would be so bummed if I had to do it again
    Next time, you can use the Text Wrap function, so you don't need to manually wrap the text.

  • I just downloaded CS6 and don't know how to start it... Please advise

    I just downloaded CS6 and don't know how to start it... Please advise

    After downloading it have you installed it ?
    If you are on Windows run the .exe file to install it and if on a MAC run the .dmg file to install the program.
    If you have already installed it, then on Windows click on 'Start' button > Go to 'All Programs' and select the application you want to launch from the CS6 Suite.
    If on a MAC the program is listed under 'Applications'

  • How to start a selection from an exact time of the clip?

    Hello,
    I'm a new user of iMovie '08 and I'd like to know how to start the selection of a part of a clip from an exact point.
    Let me explain (I'm not english, so I hope everyone understands) :
    Let's say I have one clip that lasts 1h20' ok? I remember that at 9'20'' there's a scene I want to catch. And It's very important to be at 9'20'' because there's a peculiar frame I want.
    Let's also say that my problem is not about a single point, but a lot of them. I wrote down (as an example) these parts I want.
    9'20''
    15'10''
    36'00''
    ok?
    How do I place myself in that part of the clip? I don't want to look at the scene since I don't remember it well (I wrote down the minutes since I short in memory).
    I hope this is possible. Thank you very much for your help

    QuickTime Player Pro (a $30 upgrade of QuickTime Player, available from Apple) lets you do exactly what you want to do. It lets you select a chunk of any movie using one of three time formats (one is min:sec:frames). You can Copy that chunk and Paste it into a new movie. In other words, it lets you extract just the frames you want that go in a new movie that you save as a standalone movie.
    To use the new movie you would drop it in the iMovie Events folder. (Or more likely, create a new folder in the iMovie Events folder where you drop all your chunk movies.)
    When you next launch iMovie it will generate thumbails for each of your chunk movies. Now you can use them in iMovie 7 like any other import.
    If you have iMovie 6 you can also do it there, for it shows you the min:sec:frames of your one long clip. To use any chunk elsewhere, you would use iMovie 6 to split the clip, then use the Share selected clip only checkbox in the export dialog window to export each chunk to a Full Quality DV movie.
    Karl

  • HT5824 Does anyone know how to transfer my contacts from my iphone onto my icloud that is on my laptop please? I have lokd and tryed everything and still i have no idea how to do it.Yur help would be apreiated.thanks

    Does anyone know how to transfer my contacts from my iphone onto my i cloud please? I cnnot do it no more s they have made something so simple to do into a task that seems so omplicated.ive tryed ooads and now im starting to loose my cool.Thanks if you can help.I bet it's really easy to do,but im not seing it clearly.

    On your Mac.
    Sign into iCloud, turn Contacts and anything else you want, on.

  • My safari browser seems to have been taken over by a malicious program called only-search.  Does any one know how to uninstall this program from safari?  I am running osX 10.10.

    My safari browser seems to have been taken over by a malicious program called only-search.  Does any one know how to uninstall this program from safari?  I am running osX 10.10.

    There is no need to download anything to solve this problem.
    You may have installed the "VSearch" trojan. Remove it as follows.
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • I would like to know how can I delete emails from my email block have more than 8000? Thank you.

    I would like to know how can I delete emails from my email block have more than 8000? Thank you.

    I want to say, delete the 8000 not one by one, or 50 in 50... Minimum of 200 by
    200

  • Who know how to reach Create SO from PO Output (IDOC)

    Hi,  experts,
           I have met a problem that need create SO from PO output using IDOC, anyone knows how to reach it? please give me detail steps, thanks very much!
      we need to create an SO in company code XYZ from the PO output IDOC( Message NEU ) of another company code ABC.
    Im trying to create the SO in the same System and same client , but in a Different Company code.
    Edited by: zheng michael on Mar 14, 2011 3:55 AM

    Hi,
    Take help of ABAPer,
    In my project I had done this with help of ABAPer, but not on basis of output.
    When P.O saved in one company code,system create sales order in another company code.
    Kapil

  • My iPhone was stolen.  How do I retrieve the pictures etc that were on imt.  I know they must be in the iCloud but I don't know how to get into it from my iPad.  Also, I would like to try to locate the phone ...how do I do that from my iPad?

    My iPhone was stolen.  How do I retrieve the pictures etc that were on imt.  I know they must be in the iCloud but I don't know how to get into it from my iPad.  Also, I would like to try to locate the phone ...how do I do that from my iPad?

    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
     Cheers, Tom

Maybe you are looking for