Hello, the perennial question on getting the Touchsmart touchscreen to work with WIndows 7

My IQ526 touchscreen does not work after upgrading to Win 7 Ultimate, using the upgrade software provided by HP.
I have a good installation of Win 7, diagnostics run fine, and installed the touchscreen drivers from the HP website in the recommonded order.
The Touchsmart software seems to be installed OK, and the screen "pings" when touched, but the touchscreen functionality does not work.
Any ideas on where I go from here, please?
Thank you.

CoburnStreet wrote:
My IQ526 touchscreen does not work after upgrading to Win 7 Ultimate, using the upgrade software provided by HP.
I have a good installation of Win 7, diagnostics run fine, and installed the touchscreen drivers from the HP website in the recommonded order.
The Touchsmart software seems to be installed OK, and the screen "pings" when touched, but the touchscreen functionality does not work.
Any ideas on where I go from here, please?
Thank you.
hey Coburn, if you've done all of that ... it's either a touch failure or some type of software failure. have you tried performing a system recovery? if it works after the system recovery then it's like a software problem but if it doesn't, it's a hardware problem. at that point you should contact HP.

Similar Messages

My scanner on the MF4370dn will not work with Windows 8 or 8.1.

I have a Canon MF4370dn which the scanner portion has not worked right since I got a computer with windows 8 and will not work at all since I downloaded windows 8.1.
I have reloaded the scanner tools, tried the Presto! PageManager that came with the oomputer. I have downloaded the latest drivers for the scanner from the site.
It worked with Windows 7 fine, but that computer no longer is functional and I use my scanner often.
Any ideas?
Solved!
Go to Solution.

Fixed my own problem by redownloading and installing the Windows 8 (x64) drivers and the toolbox software. Thanks anyway.

How can I get my Canon A620 to work with Windows 7

Just signed up here, ot the brightest with tech stuff. I'm trying to get my Powershot A620 to work with Windows 7. I'm guessing there's drivers I need to down load ? Will they be on the Canon website or on this help site ?
I'll keep looking around.
Steve

If you need photo software and don't have any you can download Canon software here.
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a620#Dri...
But if you already have software you use there is nothing special you need. Ether connect the camera using a USB cable or remove the SD card from the camera and use a card reader (either an external one or the computer may already have one built in.)
If you decide to connect the camera via USB you don't need a driver; its built into W7.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. Any ideas?

Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. The program installed ok and the S/N took.
The program does record video and audio HDV M2T.
The problem is video doesn't display or play back on the monitor component @ 16:9 or 720 p. 4:3....
The scopes respond as do the audio components when recording. (with a blank monitor component).
The video does play back on my system no problem.
Any ideas?
Dan

Moving the discussion to OnLocation
Thanks,
Atul Saini

Getting old Laserjet printers to work with Windows 7

Hi Everyone,
For those of you, like me, that may have an old Laserjet 4, 5, or 6 I figured out how to get it to work with Windows 7!
First, new computers do not have LPTx ports. So, when you first set up your Laserjet you MUST select a USB port - this is the main problem with getting your old laserject to work on a new computer. MY computer dispalyed USB001 and USB002. Since I have another HP printer installed using USB001, I selected USB002. You will also need a Pararellel to USB adapter cable - you can buy one on Amazon (I paid just $11.87).
Next, when selecting a printer driver you MUST select HP, NOT Hewlett Packard. Scroll down until you find Laserjet 4,5, or 6. NOTE, if you don't see these models, click on the Windows update button in the dialog box. NOTE: This may take a few minutes to display the updated list. Again, select HP and scroll down the list of drivers until you find your model Laserjet (Laserjet 4, 5, or 6).
At this point you should be good. Just finish the install process and make sure to print out a test page.
Good luck !

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Itunes can not connect to the iTunes Store, I work with Windows 7.

Itunes is working on my computer with Windows 7 I only cannot cat in contact with the ITunes store ITunes is the whole time searging

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

How do i get a scanjet 5200c to work with windows 7?

I have a Scanjet 5200c that worked well with Windows XP. When I went to Windows 7, it stopped working. HP support said they did not support this machine with a driver for Windows 7. Why not? How can I get this perfectly good scanner up and running again?

BSLund, welcome to the forum.
I do not work for HP, but I have experience with driver development. Once printers/scanners get older, it becomes too difficult to continue updating the driver. There are newer printer/scanners that have to be supported. Drivers are difficult to develop and maintain. It is not as simple as going to the code and changing the model or OS version.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I need help getting my Thunderbolt display to work with Windows 7 through Bootcamp.

I recently bought a thunderbolt display and it works great in my Mac environment. But I recently added Bootcamp and Windows 7 (I need since my Broker Dealer only uses Internet Explorer). Unfortunately, I can't seem to get Windows to recognize my Thunderbolt display. Today, I spent 2 hours with a very kind advisor from Apple Support but we didn't have any success.
Here's my setup:
MacBook Pro (purchased new in 2011) with i7 processor
Thunderbolt Display
Lion OS (all updates installed)
Bootcamp with Windows 7 Ultimate 64-bit (all updates installed)
With the help of Apple Support, I downloaded and reinstalled (through the repair option) all the Bootcamp drivers. I shut down my computer, plugged in the Thunderbolt display, turned it on and booted into Windows 7. When the Windows Welcome screen appears, it shows on my Thunderbolt display for about 2-3 seconds. But the thunderbolt quickly goes black. My MacBook Pro changes to a 640x480 resolution and the Thunderbolt remains blacked out--with no signs of even a single flicker. Once the computer finishes the start-up, my MacBook Pro remains in a 640x480 resolution, with no option to change the resolution (it's grayed out in Windows control panel). If I unplug the Thunderbolt cable from my MacBook pro, the high resolution of my MacBook pro snaps back to normal.
To me, this seems like some type of driver problem but I must be missing something simple because it appears that Thunderbolt works with Bootcamp and Windows 7--based on some of the readings I've found here in the Apple support community. I'm most appreciative of anyone's help here.

Moving the discussion to OnLocation
Thanks,
Atul Saini

How can I get Acrobat 7 Pro to work with Windows 8.1 Pro?

Apparently Acrobat Pro 7 is not compatible with Windows 8.1 Pro X64. I am trying to save a web page to pdf but this feature does not work in Windows 8.1 Pro. Is there a patch or update that will fix this problem?

It might be possible to get a lot of it working, but you will have to install a separate PS driver and rename it Adobe PDF and set the port to File. The print process is then to print to the Adobe PDF printer and then open the created file in Distiller to complete the process. I have been successful with this on a Win7, 64-bit system, but not tried it on a Win8 system. You are pretty much on your own if problems arise, unless you are willing to try wild suggestions that we might give (guesses really).

Getting my ipod touch to work with windows 8

i have trouble getting my ipod to work in window 8

If the problem is that the iPod does not appear in iTunes then:
iOS: Device not recognized in iTunes for Windows
Otherwise what is the problem?

I am unable to get Airport Extreme WiFi to work with Windows 8 Sony Laptop

My Airport Extreme WiFi works with my Mac Book Pro, iphones, ipad and DVR's, but will not work WiFi with my Sony VAIO laptop running Windows 8. Although it does work with the laptop using a ethernet cable. Has anyone else had this issue and can you please tell me how to resolve the problem?

Windows can have issues with the wireless name.
Make sure the name conforms to windows standard.
Short, 2-20 characters
No spaces,
Pure alphanumeric.
eg AEwifi is a good wireless name.
Fred Blog's Airport Extreme Wireless87AD34 is a really bad name.
Test also by removing the security and just see if you can connect if the short name doesn't help.
WPA2 Personal is really the only security worthy of the name and the password should be mix of upper and lower case plus numbers.. keep it pure alphanumeric also.
Set fixed wireless channels at least for 2.4ghz may help, depending on your location geo standards wise.
Test 11, 6, 1 in that order. With no security briefly. And a short name. (different name on the two bands is also a good idea).
Then wireless is not compatible.. you should download another driver for whatever wireless card the Sony uses.. intel most likely and they have a reputation as lousy. So download latest and a few prior to that as well.

How do I get Adobe Professional 8 to work with Windows 7?

I have a new computer with Windows 7 on it and when I try to install Adobe Professional 8 it says I need a Windows Vista Adobe PDF.dill file. Where can I find this file? I do not have Windows Vista.

Error "The file AdobePDF.dll is needed" | CS3 | 64-bit Windows

Does the 4th gen shuffle work with windows 8

I have a 4th gen shuffle and my laptop, windows 8, is not recognizing it. What can I do??

iTunes needs to be installed, to give Windows the necessary device drivers and services. You can get the latest iTunes installer here
https://www.apple.com/itunes/
Does the shuffle's light come on in any way? If it does, what does it do when you connect it to USB?
If the light does not come on, first make sure the docking cable plug is completely inserted into the shuffle's headphones jack, as shown in this document.
http://support.apple.com/kb/ts3572

My Photoshop CS (£500 at the time) will not work with Windows 7, what am I supposed to do about it?

I have just spent at least two hours messing about trying to activate my Photoshop CS (using a new hard disk) until finally being told (via a long useless telephone call and two long chat sessions) why I can't activate it, and also that it cannot be replaced by CS2 because that is only for Windows XP which of course is to be faded out next year! It seems to me unreasonable that such a large expenditure (£500 at the time) should be casually dismissed as CS being 'not being compatible with...' and it being a very 'old' program. It was working well for me. Why am I supposed to have to pay for another version? Is this even legal? At the very least there should be some special offer for people in my position.
Photoshop justify this?

Dear Old Bob..I enjoyed that! I and thanks so much ...I would have done it if I could have done it but I was blocked by Photoshop at every stage! Thankfully my own IT Guru and friend came to the rescue remotely last night and has down-loaded it. But it took him quite a bit of time.
As XP is faded out, there will be an awful lot of people like me complaining.
But truth is my problems are only at a start! About 30 prints (some not yet on my 'blog' (juliamatcham.wordpress.com) all have varying settings which I have noted. Everything depends on these settings.
All are Apple RGB (although my computer is a PC) and they were all set for my printer Epson Photo 1800. Also they were set at varying settings...Standard or Vivid 1.5, 2.5 whatever suited the design.
These settings appear not to exist on CS2 which is a nightmare for me as each print was carefully proofed with a great deal patience and at some expense as in the end one has to use expensive paper even for proofing.
If you have any hints for how to translate these old settings...I would kiss your feet!
Just looking through how things work, I can't understand why I can't change my first printing option to landscape ...everything esle so far seems comprehensible.
I do hate change!
Meanwhile, thanks so much to Curt, Noel, Nahraka and Old Bob for cheering me on. I am obviously going to be back asking more questions about CS2!
Julia

Is there a driver for the PXI-8310 that works with Windows 7?

The only one I can seem to find is for XP.

Hello LouisTI,
Unfortunately there is not a Windows 7 driver for the PXI-Cardbus8310, as this is a legacy device which is currently going EOL (End of Life). The XP driver for the 8310 (which you may already have found) can be downloaded here:
http://joule.ni.com/nidu/cds/view/p/id/370/lang/en
If using Win 7 is critical, we recommend the PXI-ExpressCard 8360 as a replacement for the 8310:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/202294
Hope that helps!
James M. | Applications Engineer | National Instruments
James M. | Applications Engineer | National Instruments

Hello, the perennial question on getting the Touchsmart touchscreen to work with WIndows 7

Similar Messages

Maybe you are looking for