Hello there. I have MacBook Pro 17" (2008) Core 2 Duo
Hello there. I have MacBook Pro 17" (2008) Core 2 Duo, i installed RAM 2Gb 2Gb, and for 4Gb RAM i have only 3Gb. Now i installed Lion, but anyway i have only picture in "about this Mac" 4GB but in process it using 3GB. What can i do to make my machine powerly form 3 GB???
hi. thank u for help topic. This is my machine information
Model Name: MacBook Pro
Model Identifier: MacBookPro2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP21.00A5.B08
SMC Version (system): 1.14f5
Serial Number (system): W87161NUW0J
Sudden Motion Sensor:
State: Enabled
did u see? Memory: 4 GB!!! But in app Activity Monitor the system memory using only 3 GB
Similar Messages
-
I have a MacBook Pro with Intel Core Duo and Snow Leopard 10.6.8. Would like to upgrade to Lion but it requires a minimum of Intel Core 2 Duo. Can I get what I need or do I have to buy new MacBok Pro?
I also have a core duo MBP with Snow Leopard and it runs perfectly. There are very few things it cannot do as compared to the faster, newer MBPs, but that is attributable to the CPU, not the OS. There are some who view Lion as downgrade rather than as an improvement. If there are important applications that reqire a fast CPU or Lion features that you find essential, by all means get a new MBP.
I have an aphorism: Obsolescence is more often a perception rather than a reality. Besides the silver keys look much classier than the black ones.
Ciao. -
hello there
I have Mac Pro I broced the screen but it still under apple care so I just want to know if they going to fix the secreen or change hole the Mac Pro?Mac Pros are towers and have no monitor. A MBP does have a screen, but unless the screen damage was a manufacturing defect, Apple will not cover the damage under your warranty. But they will fix it at your expense.
-
I have macbook pro running Intel Core 2 Duo if I upgrade to Lion OS Xv10.7 will my macbook run slower?
I have a 13" MBP with the Core 2 Duo processor. I do have 8 GB of memory, needed because I need to run Windows in a virtual machine (Fusion) to access client web sites that require ActiveX controls. The Windows VM environment locks up 3 GB of the memory.
I did all the maintenance steps in disk utility on the harddrive before upgrade, double checked compatability with all applications and drivers and made sure that I had a drive clone in addition to my Time Capsule backup.
The only thing that didn't work on Lion was my RingCentral VOIP client, and that was expected from my research.
The upgrade went smooth and I really haven't noticed much speed difference. -
Windows 7 RC Build 7100: No Audio on MacBook Pro 1,1 (Core Duo)
On Thursday, I installed the brand new Windows 7 RC Build 7100 on my MacBook Pro 1,1 (Core Duo). This version of Windows seems to be zippy and far more polished than Vista: boot time is much, much faster. So my main problem is this: I can't get sound to work at all. In the Device Manager, the audio device is banged out and shows as a "High Definition Audio Device" rather than AC'97 or whatever it's supposed to be. If I check the properties, under status it says, "The device cannot start. (Code 10)". I've tried to installing the drivers from RealTek about a zillion times, the Boot Camp drivers from the Leopard install disc and I've run all the little setup programs as Administrator and in Vista compatibility mode, but no luck. Has anyone else had any luck in getting the Windows 7 (7100) to run on an early model MacBook Pro with working audio? Thanks!
Can't speak for MacBook, but for the desktop Mac Pro, the audio issue with Windows 7 install on boot camp is a known issue. You probably need to install the Realtek driver from your leopard install disk. It worked for me. Fixed the audio in about 5 minutes.
Try this:
while running windows 7
Insert 10.5.4 or later Leopard disk
Go to Boot camp folder
Locate the Realtek driver .exe file
Run it, it's an installer file
Restart.
Fixed my problem, similar to yours.
Mike -
I have MacBook Pro. I have my iPhoto library on external hard drive only. It has 30,000 photos on it. I have bought a 2nd external hard drive and would like to copy my iPhoto library onto it as a back up. I tried plugging both in and dragging the iPhoto library into the 2nd external harddrive. It looked as though it was working as it said 20 hours, however I then got a message box saying FiNader could not complete the task due to incompatible files. How do I do this please.
lllaass wrote:
Yes, you should format the HD.
A Mac can natively write to a NTSF drive and that is what most drives com formatted with.
You should use the Mac journaled format.
Once again you are posting incorrect information
Until we know what format the drive is it is impossible to state that it must be formatted - that is just a guess
And a Mac can not Natively write to an NTSF drive - it can natively read it but can not write to it with special software
And since formatting a drive erases it it is critical to tell users not to format until they have a positively known good backup
The TOU for these forum state that you should test your answers prior to posting them -- you obviously are not doing that and you advice is endangering users photos - please only post tested answers
LN -
Please help.
Your macbook pro has a 32 bit processor and not a 64 bit processor?
If so, i believe photoshop cs5 is the newest photoshop version that will work on your Macbook Pro.
System requirements | Photoshop
You can get a 30 day trial trial version of photoshop cs5 from here:
http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
Also, photoshop cs through cs4 should work as well, but cs3, cs4 and cs5 will run better since cs and cs2 require Rosetta and can be kinda slow at times. -
Macbook Pro 1.83ghz Core Duo - Boot Disks
Hello. I have misplaced my startup disk. Any chance I could paypal someone some money in order to get a burned copy mailed to me? The apple store doesn't have any.
Thanks!
TomCall Apple tech support. They can send you a set for a reasonable fee.
-
Hello, I have macbook pro, late 2008, OS X 10.5.8 and I want to upgrade to new soft, which one is the proper one for me Snow leopard or Mountain Lion, and what is the differences between those.
What do you recommend at this time for me.
Thanks a lotYou can upgrade to Mountain Lion, but you have to upgrade to Snow Leopard first. Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Then, make a backup, insert the DVD and upgrade. After upgrading, open Apple menu > Software Update and install the most recent version. Mac OS X 10.6.8 includes the App Store, so open it and purchase Mountain Lion. See if your programmes are compatible > http://www.roaringapps.com -
MacBook Pro Late 2008 (Unibody) doesn't boot
Hello,
my good old MacBook Pro Late 2008 running Mountain Lion won't boot anymore. The sleep light does not light on, the green battery status indicator light is showing that the battery is full. I had this problem two or three times, and usually my Macbook comes magically back to life after one or two days.
At the Apple store they said I'd have to make a SMC reset, and when they did it in the store, it worked. But it doesn't work for me (and I am sure I am doing the same thing, so maybe the Apple guy was just lucky – or is there another special trick?). What could be the solution to my problem?
Unfortunately, I can't really tell the exact specifications, but it is the standard model, and I didn't change anything since. I just had the problem that it was getting really hot like half a year ago, but then I cleaned the fans and since then it was running rather fine (just sometimes froze).
Any help greatly appreciated!
JulianI've got the same, or almost the same problem on a MBP 2008 (late).
MBP 15.4/2.53/2X2GB/320/SD/512VRAM upgraded to 8 GB 1067 DDR3 (OWC memory)
In my case the computer works fine when I'm able to get it on. If it is turned off and the MagSafe charger disconnected then left that way for a few hours, and the MagSafe is re-connected, let it charge for a bit, it can often be turned on via the power button. HOWEVER, .....
If it is left OFF overnight (Apple > Shut Down .... ), and the backlit keyboard goes dark, then a little pause before closing the lid, and left overnight, it will usually not be able to be turned on. The battery is in reasonably good condition (~+3500 mAh) and the newer battery (~ guess +5000 or more mAh) it doesn't do any better, and it won't turn on. Cycle count 183.
Take the battery out, (disconnect the MagSafe first! Never have the MagSafe charging without a batter in the computer) wait half a minute, reinstall battery (I like the 5,1 because the back section can be easily removed to access the battery and the hard drive), attach the MagSafe charger then wait a bit (few minutes), and the computer can often be turned on the first time. If not the first time then repeat the process. Tried hitting the Power button with the battery off but that doesn't seem to change anything.
Erased the HD (Hard Drive) and reinstalled Yosemite, have Fire Vault turned off, did a Utilities (Cmd + r ) check of the hardware (no problems), also did a few other tests - no problems. PRAM reset. Investigated BONJOUR - haven't gone into the Terminal yet. Would be nice to disable Bonjour without disabling DNS. https://www.apple.com/support/bonjour/ and http://apple.stackexchange.com/questions/151485/how-do-i-disable-bonjour-visibil ity-after-yosemite-install and http://forums.obdev.com/viewtopic.php?f=1&t=6106
The Genius Bar tested it and couldn't find a problem. Suggested the Logic Board be replaced and that i$ expen$ive! I've investigated having the Logic Board repaired and that would cost around $150 + shipping. Won't do the oven trick. Other problem sources I've come across is the graphics chip (mainly on the 2008 (early) MBPs.
Since erasing and reinstalling OS X Yosemite the computer really screams but I've started to reinstall some of the applications (FCPX & Motion), Documents, and Movie files. Still screams though! Nothing like a real cleaning of the hard drive. Didn't do a Time Capsule-type backup because I wanted to minimize "junk". The CanoScan LiDE 90 scanner won't work because Canon won't come up with a driver to work with Yosemite. Won't buy a Canon scanner again and didn't want to buy it to begin with due to a previous Canon problem. Bought a new Canon camcorder, $1,600 + tax, back when they had mini-tapes, it at the Maxwell tape but just outside the warranty period and wanted something around $500 to fix it. Turned out that was a typical problem.
Really running out of options and ideas at this point. Hate to send it off to repair the Logic Board. Still looking for a software or setting fix. -
MacBook Pro (Late) 2008 running 10.8.4
I was using my computer every morning as I do everyday with no issues. I had left home for most of the day. Closed lid and while I was gone for a couple of hours. I returned home, opened my MacBook and nothing but a black screen. I've tried many things all evening try and fix this problem out of "safety sleep mode, and other similiar tricks that other people had tried.
I still have a Black Screen and cannot get my macbook out of what seems to be the sleep mode.
I've done a master reset and after I restart, I do get the power up chime but still a black screen. I don't know what else to do. Please help. Should I bring computer to a local repair shop or is there something I can do to fix myself. I just don't know where to start.
Thank you.
SusanGenius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do -
Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive. The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?
I have posted this annoying Robles to bugreport.apple.com. Hope I can get locution (although Apple normally will not respond):
On a software name Appfresh, it alerted me to update my MBPr 15 inches running latest OSX 10.8.2, with Chinese Word List Update 1.2. When I clicked on Software Pdate, app Store return No update available.
My system have Chinese Word List Update 1.0 installed, and on October 5, 2012, Chinese Word List Update 1.1 was released by Apple, as alerted through AppFresh. However, this update never get updated on m system. I have to manually download chinesewordlistupdate.pkg from reviews.cnet.com/macfixit and install it manually. By doing so, I have Chinese Word List Update 1.1 on my system.
The same problem occurred again today on November 5, 2012, where Chinese Word List Update is released by Apple. again, it fail to update from Software Update menu.
Can you please:
1. Explain why this problem occurred. This is so annoying.
2. Advise me how can I get this Chinese Word List Date to update to version 1.2. Can you please send me the chinesewordlistupdate.pkg for version 1,2 so that I can manually install it on my system?
3. How can I prevent similar problem with he subsequent version?
Why Apple don't make this update standard as other update?
Support please. Thank for response in advance -
Running an old MacBook Pro 2.5ghz core 2 Duo. Battery went chemical meltdown and expanded out of its housing. Removed it and was running off the power cord. This worked for a while. Now it won't start up. Have a Replacement on order. Is there a bigger issue or does a battery need to be in the compartment to boot up? Appreciate any help. Thanks.
Working battery needs to be in for the computer to function.
-
Does anyone else think that the AppleMac group of products are marketed in a greedy way? I have MacBook Pro 10.5.8 with Leopard and am now told that I have to upgrade to Snow Leopard so that my system can download the relevant iTunes upgrade to sync my new iPad and get my audiobooks (which don't appear anywhere on the device right now). Of course there isn't enough memory on the MacBook and Snow Leopard costs more also? I don't have financial resources to pay for all the new memory requirement and related upgrades they say I need just to sync my iPad with my purchases.
Thanks for the reply but I already knew this. $20 for Snow Leopard which asks for 5gb free memory. I can only see that I have 4 gb (which I feel is rather a pathetic amount of available memory for any computer). To upgrade this computer's memory will cost another fee (I haven't researched this yet but gather it's more than $20). Then of course I could also be told that the OSX Mackbook Pro that I have can't be memory upgraded - which means I'm being told to buy a new computer - hence my very frustrated last email. I have been given a lovely iPad 2 as a present and now can't sync at all with anything because of this ongoing upgrade nightmare. How on earth am I going to be able to sync my movies, audiobooks etc to this new device??
-
Hi, I have macbook Pro, running Leopard OS X. I partitioned my hard drive a while ago to install windows and only allowed myself 10 Gig of data. I deleted windows after i realised i wasnt enjoying using it at all and wasted my hard drive. I now decided that i want another OSX on there instead yet i have only allowed myself 10 gb on the partition. I have ben thru some programms but am struggling on making this partition bigger.
I only want it at 20gb but cant seem to make the partition bigger, only smaller or split it into further partition.
Is there a way to do this, i have all installation discs from original OSX so think this could help.
Any help please would be fantastic.
Thanks ChrisHi, dragging the partition will only make smaller, not larger. In disk utility you can only split or make smaller the partitions. Yes i booted from installation disks also but still no help.
And Brody, I am willing to erase the disc completely, infact jus started doing a backup in order to do so but that failed also. And the information you gave on partition a hard drive, Although very simple and i already know how to do this, but it wont let me make the partition bigger, and i dont want to make a new partition, just enlarge the one i already have, which i dont see possible from disk utility.
Getting really frustrated now, even backing up is saying no to me. **** external being a douche.
I dont mind erasing the hard drive but surely this must be doable without deleting the secondary partition back t a single volume, and re partitioning into 2 volumes again.
Thanks again
Maybe you are looking for
-
Performance of AQ when using callback procedure (using PL/SQL notification)
I am enqueueing XMLType in AQ.XML file is large in size.NOw I want to dequeue the AQ using PL/SQL notification(using callback procedure which will call DBMS_AQ.DEQUEUE to dequeue the AQ and process the XML.After fetching the data from XML ,I want to
-
Maxl doesn't logout after Calc Script execution
Hi All, I have a batch script which runs to load data and then aggregate data using calc script. Maxl completes the load and then starts the calculation execution but this never ends. I tried looking into the logs and it shows that Calc Script execut
-
Device works using max but not with VI
Hi All.. I am able to control a kepco power supply with comminicating by MAX. But with VI (7.0) that has the same command structure it s not possible..Moreover, i dont get any error message either. Could you have a look the VI attached and make ur co
-
Hi I wonder is anyone else having trouble with iphoto doubling your imported photos? I connect my Nikon D90 and it is recognized but then it displays 2 of each picture on the SD card. If I import it imports 2 of each photo. Help!
-
Release notes for Enhancement Pack 3
Hello; when will the Release Notes for Enhancement Pack 3 be available? It is due to come out of rampup very soon and the Release Notes are usually provided then. Many thanks. Nick Taylor EDS SAP Practice EMEA