Hello, we are using Lab View, to run testers, for checking our production parts. At different times during testing we are getting an error message with a number indicating something.

The number appears to be different every time. The error will stop the test. Sometimes, the test will complete, but instead of passing or failing, we get an error message. Most times these keep comingup every other or every 3rd part.Most times we can reset the problem, and at least get rid of the errors for a while, by shutting down the whole system, including the main disconnect. Then powering back up. HELP!! This has been going on too long!!

What's the error number and message? Is it a LabVIEW error code or a user created one?

Similar Messages

Hi there,both my uncle and i are using iphone 5 that runs on 6.1.2 whenever i send or receive tweets i'am not getting the twitter default sound,i'am getting tri-tone sound.My uncle however would get the default twitter sound whenever he sends or receive.W

Hi there,both my uncle and i are using iphone 5 that runs on 6.1.2 whenever i send or receive tweets i'am not getting the twitter default sound,i'am getting tri-tone sound.My uncle however would get the default twitter sound whenever he sends or receive.What's up with that?

Check: Settings - Sounds - Tweet - Set to your preference.

Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?

HT5487 So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "inte

So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.

A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert

HT4236 I get an error message with I try to plug into itunes; This iPhone cannot be used because the Apple Mobile Device service is not started.

I get an error message with I try to plug into itunes;
This iPhone cannot be used because the Apple Mobile Device service is not started.

http://support.apple.com/kb/TS1567

I run mac os 10.4.11 and firefox 7 will not open, and I get an error message saying firefox is not supported on this version of mac os. is there a different version I can download? Am I missing something?

firefox used to work no problem, I updated firefox a few month ago, now firefox will not open and I get the error message as above

As of Firefox 4.0 and newer one needs both OSX 10.5+ and a Intel Mac.
The last version to work on a Intel Mac using OSX 10.4.* is Firefox 3.6.*
http://www.mozilla.org/en-US/firefox/all-older.html
http://www.mozilla.org/en-US/firefox/7.0/system-requirements/
http://www.mozilla.org/en-US/firefox/4.0/system-requirements/
http://www.mozilla.org/en-US/firefox/3.6/system-requirements/

Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive. I get the error message E:/not accessible or something similar. Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive. I get the error message E:/not accessible access denied. Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

Apple has really crappy NTFS read-only that does not always work. And it is probably a licensing issue.
Paragon Software is constantly being updated and supported with their NTFS for Mac OS X - they also have an HFS+ driver for Windows that works - Apple's HFS+ read-only driver for Boot Camp / Windows does not.
I keep seeing problems and lack of support for MacFUSE, that could change.
http://www.bing.com/search?q=ntfs+for+mac

I have been using itunes on my windows based pc for years but since installing the latest itunes update I have been getting the error message A required itunes component is not installed. Please reinstall itunes. (-42404)

I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I blog on TypePad using Word 2007 and documents freeze when I'm looking at them in Windows explorer; why do I get the error message that Mozilla is looking for a script?

I have now had two error messages - the first one looked for this script: Script: resource://gre/modules/XPCOMUtils.jsm:258. The second one (today) looked for Script: resource://gre/components/nsPrompter.js:68.
I have reset my word template, also reset word registry for data and options (as per Microsoft's help pages) for both those 'fixes' there was an initial improvement, but the problem happened again after I reposted on my blog today and then went to Windows explorer to view my files. It seems to 'seize' as I select a file, so that the preview does not appear (for up to 15-20mins).
I see on the internet using the second script as a search just now that one other has had a similar problem and one also since Mozilla 4 upgrade. My problems have also been pretty much since I upgraded.
It happens (apart from my fixes) every time I go to look at a word document via Windows explorer. Excel files are less affected.
One web suggestion is to clear the cache, but I am hesitant to lose all my passwords unless I have to.

I still have the problem although I uninstalled Mozilla (clearing the cache didn't work and neither did Word diagnostics), so have ended up thinking it could be Norton (the manual update worked x1) or Windows. Today I found an answer: disable the preview pane in Windows Explorer - there's a history of problems with this view.

I am running Microsoft Outlook for Mac 2011 and all my tasks on my imac are gone. I can create new ones but cannot find my old ones. I have tried to rebuild the database but I get an error message with [-18000] code

I am using Microsoft Outlook for Mac 2011 and in the last two weeks all my tasks disappeared. I have tried to establish a new identity but the database will not rebuild (error code [18000]. I have tried to restore a backup from time machine but get the same problem. Any help would be appreciated

Not very many Outlook users here. You'll to better asking in Microsoft's Office:Mac forums here:
Office for Mac forums

I keep getting an error message that says the safari browser version you are currently using does not support the community toolbar. how do I fix it?

Everytime I open my imac I get an error message that says: "We're sorry but the Safari browser version your are currently using does not support the community toolbar." I can't see where it affects anything else, but getting an error message on an imac, just doesn't seem right, ya know? How can I get rid of the message.

Apparently an add-on named Community Toolbar was installed at one time, and is causing the problem. To get rid of it, quit Safari, then throw away these files -
Macintosh HD/Library/Application Support/Conduit
Macintosh HD/Library/InputManagers/CTLoader
Macintosh HD/Library/Receipts/ctloader.pkg
Macintosh HD/Library/Receipts/<Toolbar name>.pkg
Macintosh HD/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
Macintosh HD/Users/<User name>/Library/Application Support/Conduit
Note - if you are using Lion, the Library folder in your home folder (user name folder) is hidden. To get into it, in Finder open the Go menu; with that menu open, press and hold the Option key. An item "Library" will be added to the list, and can then be selected. That will open the Library folder in your home folder.

I keep getting an error message when trying to connect to sync on my Android saying the user name and password are invalid.

I am using Firefox 4.0 Beta 7 on both my Android as well as my laptop. I am trying to set up the sync feature and keep getting the error message on my Android saying that the username or password are invalid. I have tried uninstalling and reinstalling, I have tried changing my password. I continue to get this error message.

Can you try again with Firefox 4.0b8 (desktop) and 4.0b3 (Android)? We have changed the way that Sync setup works, and it no longer requires entering the password and sync key by hand.
For details, see: http://blog.mozilla.com/services/2010/12/22/easy-setup-for-firefox-sync/

I had OS 10.5.8 on my Macbook and couldn't run turbotax 2012 because of that. I purchased Snow leopard on CD and installed it. Now, about my ABOUT this mac says 10.6.8. Now, I can't print to my Lexmark z705. I get an error message.

I had OS 10.5.8 on my Macbook and couldn't run turbotax 2012 because of that. I purchased Snow leopard on CD and installed it. Now, about my ABOUT this mac says OS 10.6.8. Now, I can't print to my Lexmark z705. I get an error message with no explanation.

Unless there are drivers provided by Apple to work with the printer, you're out of luck. The latest drivers provided by Lexmark are for OS X 10.4 Intel. Unfortunately, this can happen when slightly older peripherals and newer software don't mesh.

Since I installed Nero 2104 I get an error message when I try to start iTunes: registry settings changed probably due to other cd/dvd burning program please reinstall iTunes, which I've done using repair option but the problem persists...?

Since I installed Nero 2014 I get an error message when I start iTunes that registry settings for importing and burning cds/dvds have changed probably due to other burning software installed please reinstall iTunes, which I've done using 'repair' option, but the problem persists. I have been able to import cds to iTunes since I installed Nero, but it won't anymore. Does anyone recognize this problem and have a solution? Thanks for any help. Using Windows 7.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters

How to shutdown the PC using Lab View

Hi,
We are doing UPS project. In this project we have to shutdown the PC if there is a battery low condition. I want to know whether is their any library function in Lab View to shutdown the PC. And also we want make this labview to run in background whenever PC turns ON, is their any way to make Lab View VI to run in background process. We are also planning to send UPS Status through SMS message to specified mobile number using modem, is their any way to do this using Lab View. Please help me in this regards.
Regards
Shivakumar Singh

Sorry
Attached now
"Qod natura non dat, Salmantica non praestat"
Attachments:
Shutdown_labview.zip ‏67 KB

Hello, we are using Lab View, to run testers, for checking our production parts. At different times during testing we are getting an error message with a number indicating something.

Similar Messages

Maybe you are looking for