Hello ! What's the music in the last iPhone's TV Ad ?

Hello ! What´s the music on the last iPhone's TV Ad please ?

Alex ~ Welcome to the Support Communities. Keep an eye on 2013/04 iPhone 5 ad "Photos Every Day" (currently the last entry) here:
List of music used by Apple Inc.
...Found by doing THIS.

Similar Messages

  • What is the last software update for N95 8g..??

    what is the last software update for N95 8g and what are its problems any one feel after new update??

    IN N95 8GB sometimes when I try to open music player,it hang and close by itself although I use only 2 gigabytes of mass storage memory and I have to restsrt phone to make this music player work quickly and normally again but this problem repeat again and again in sometimes and I do not know what I can do to solve this bad problem and I found that when music player hang, every thing in mobile like web or search or camera applications....etc still work without hanging except gallery and video center and real player applcations!!! can any one tell me If he face such as this stubid problem..

  • What is the last version of the Apple OS that supports Eudora and Quake III? (I'm at 10.4.11)

    Hi There,
    I am having vertical line issues with my G4 PowerMac Quicksilver (April 2002)..  Red or purple lines and sometimes they connect to the pointer arrow.
    I thought it was the graphics card but when I ran the Apple Hardware Test Disk version   1.2.5 it failed at the Logic board, although it's an after market Logic board because one of my (2) 1 gig processors died a few years back so I don't know if the hardware test disk is still valid with an after market Logic board?
      Also What is the last version of the Apple OS that supports Eudora 6.2.4  and Quake III? (I'm at 10.4.11)
    Thanks for any and all help, I think my time is limited in my old Mac..
    Eric

    Hi-
    I'd strongly recommend replacing the thermal compound on the Radeon 9800 Pro. It could very easily be a simple matter of lack of cooling which is causing your issue.
    I have a tutorial here:
    C874D84E-96DD-4DFF-9566-7C66BE065BB5.html
    16196A0F-952B-47ED-A9F9-91F7B0ECA431.html
    Use Arctic cooling MX-4 compound.
    As for drivers or ROM updates, if the card is a flashed one, don't bother with the firmware. All ROMs are the latest firmware.
    In Tiger, there is a retail driver update that you can try:
    http://support.amd.com/us/gpudownload/Pages/jan2005updater.aspx
    No updates needed for Leopard.
    Eudora should be fine:
    http://lowendmac.com/misc/10mr/mb0910.html#1
    Quake is fine. This coincides with my observations:
    http://www.insidemacgames.com/forum/index.php?showtopic=31884

  • What is the last resort if Adobe DNG PE still does not allow to increase WB adjustment range ?

    what is the last resort if even Adobe DNG Profile Editor still does not allow to increase WB adjustment range sufficiently (through modified .dcp profile) ?
    the raw file in question = https://app.box.com/s/yyd43xq29cdsu2mvyp5w
    thx.

    You can use the curves to further shift the color.

  • Hello, what is the best way for me to convert RW2 raw format for use in Photoshop CC

    Hello, what is the best way for me to convert RW2 raw format for use in Photoshop CC. I would appreciate any help with this.

    Thanks for the quick help. I do have to leave for work. When I try to
    download the images from the camera they seem to only be in jpeg (I don't
    see any rw2 or raw files to download). If I select the jpeg file it seems
    to only download a jpeg file. I do understand that I do have the option to
    open the jpeg in RAW. In doing this, is all the extra information included
    in the RAW file there or is it lost coming from the camera
    Once again thank you for trying to make me understand how this works.
    Have a great day.
    On Sat, Sep 13, 2014 at 12:14 PM, ssprengel <[email protected]>

  • What is the last version of Final Cut available for the G5 PPC & OS X 10.5?

    What was the last version of Final Cut available for the G5 PPC running OS X Leopard? I'd like to get a copy (from ebay or some other vendor).

    Final Cut Studio 2...FCP 6.0.6
    Shane

  • What is the last version update in apple tv and how can i know what is my Operating System

    What is the last version update in apple tv and how can i know what is my Operating System
    i have an apple tv 3
    thx

    6.1
    Settings > General > About > Apple TV Software

  • Check what is the last operation for a table

    Hi expert,
    I need to check what is the last operation for a table ? ( such as insert/delete/truncte.......), will show me the function or sql to get that?
    Many Thanks,

    hi,
    please take a look at this link
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1590655700346557237
    regards,

  • Trying to update iMac G5 with OS X Snow Leopard and unable due to no Intel proccesor. Are all new upgrades going to be unavailable? What is the last available upgrade?

    I'm trying to update my parent's iMac G5 with OS X Snow Leopard and unable to do so because it doesn't have an Intel processor. Are all new upgrades going to be unavailable? What is the last available upgrade? Is it possible to get an Intel processor installed?
    Thank you
    Lindsay

    Actually you can upgrade to snow leopard.  I have an iMac G4 and upgraded to snow leopard by installing it using an external DVD RW drive.  It was complicated but it worked.  I ended up going back to using tiger though.  I liked it better the simple old school way.

  • Does anyone know what time the last episode of Breaking Bad starts streaming

    Deos anyone know what time the last episode of Breaking Bad starts streaming on itunes?

    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.

  • Hello.what is the best converter for iPhone(for converting variety of file formats to mp3)?

    hello.what is the best converter for iPhone(for converting variety of file formats to mp3)?

    the way the total video convert works is really easy you put the song in that you want to convert you tell it to convert into mp3 format and stay the same quality
    Message was edited by: Robert1986nb

  • What's the last version of IOS I can download on my iphone 3gs? (it is factory unlocked)

    what's the last version of IOS I can download on my iphone 3gs? (it is factory unlocked)

    Some App developers keep older versions around for download.
    You will need to download the App to iTunes on a computer first.
    With that done you can follow these steps to get a compatible version:
    Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support

  • What was the last firmware version for the Zen Micro before M

    I would like to know what was the last firmware version for the Zen Micro before the MTP firmware?
    Please make sure you are 00% on this.
    Thankyou.

    I think it does, but I'm not sure; since I wanted MTP, I only used .x firmware long enough to save the original Creative test files (with MediaSource, not ZMME) before upgrading to 2.x. And yes, I had to li've with 2..02's shorter battery life until 2.20.05 came out.
    May I ask why you want to go back to .x firmware? The only thing that will get you is the ability to use it with Win98SE/2000/Me--but only if you can install Creative drivers on every PC you use it with. MTP requires WinXP SP or 2 and WMP 0, but doesn't need any Creative software at all to work. (Microsoft has made an MTP driver for Win98SE/2000/Me, but it requires customization and may not be supported by other software. I'm tinkering a bit with the customization part right now.)
    There are other pitfalls in changing Micro firmware families, in either direction--you'll lose all the files on your Micro, you'll have to install a different ZMME (and I've heard non-MTP ZMME isn't quite as full-featured as MTP ZMME), and you'll need a new plug-in for MediaSource to work.

  • What is the last version of NUServer64.

    What is the last version of

    Hi-
    I'd strongly recommend replacing the thermal compound on the Radeon 9800 Pro. It could very easily be a simple matter of lack of cooling which is causing your issue.
    I have a tutorial here:
    C874D84E-96DD-4DFF-9566-7C66BE065BB5.html
    16196A0F-952B-47ED-A9F9-91F7B0ECA431.html
    Use Arctic cooling MX-4 compound.
    As for drivers or ROM updates, if the card is a flashed one, don't bother with the firmware. All ROMs are the latest firmware.
    In Tiger, there is a retail driver update that you can try:
    http://support.amd.com/us/gpudownload/Pages/jan2005updater.aspx
    No updates needed for Leopard.
    Eudora should be fine:
    http://lowendmac.com/misc/10mr/mb0910.html#1
    Quake is fine. This coincides with my observations:
    http://www.insidemacgames.com/forum/index.php?showtopic=31884

  • What is the last version of labview to support classic FieldPoint?

    what's the last version of labview to support classic FieldPoint?
    Solved!
    Go to Solution.

    In general, yes.  Others with more experience than I do might be able to help.
    I think there is a chance you can get some older versions of LabVIEW to work on Win7.  There are occasional message threads where people have asked about a particular version and others said they have been able to get them to work.  Just that official support for older versions of LabVIEW for a Win7 OS has ended.

Maybe you are looking for

  • Need Information about CRM 2007

    Hai all.. Could u give me the information about CRM 2007? About the feature and the benefit using this new one. Is it more difficult to configure? Regards, Rhesa Syahrial

  • How to trigger my own annotation like @Deprecated?

    seems that only compiling classes which use my own annotations will trigger my annotation processor, is there any way to trigger my annotation processor like @Deprecated does? that is when using something which has been annotated will trigger my anno

  • RAM issues in saving on PS

    I'm having an issue saving the file I'm currently working on, and I don't want to lose the progress I've made (don't have time to spare) I'm running 64-bit Windows 7 OS with 8GB of RAM. I don't know why this is happening... To the best of my knowledg

  • Script Icon Creates Problem with Layers

    This is probably a really stupid question, but I had created a navigational bar for my site in Fireworks MX 2004. After working through a few issues I decided that it would be best to add popup sub-menus to the navigational bar. I am working in Dream

  • Gaim-svn-17980-1 unstable

    the recent version of gaim-svn-17980-1 is unstable. as soon as it logs in in yahoo (i have saved the password, so when i start gaim, it signs in automatically), it crashes. This is not the case with gaim-svn-17840-1 though. I had to go back to that.