Hello,when i try to go to a website,i ca'nt log in because my user name and password pops up from another site,very frustrating,thank you.

My user name and password pop up even when i'm trying to go to a new site with a new name and password,i would like to delete all this info and start again as i'm being blocked from using other websites as my previous info is being entered into the new site.

Might try calling Apple to see if you can either get replacement originals, or Retail Tiger Disk, might have to talk to a product specialist & explain the no Disks deal.
You can check eBay, just be ertain the disks work for your particular model, many/most are machine specific.
You might also try this...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

Similar Messages

Initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
Open cmd prompt and type "cd c:\temp".
Launch the browser and open the PDF.
Open task manager, sort processed by name. Two AcroRd32.exe instances should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
Perform your steps to cause the crash.
Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
Thanks in advance for all your help
Ankit

The wrong user name pops up when I try to update apps on Iphone. Unable to update or change incorrect user name.

The wrong user name pops up when I try to update apps on Iphone. Unable to update or change incorrect user name.

It is popping up because you have apps installed that you bought with the old AppleID, you can either delete those apps or buy the apps again using your new Apple ID, if they were free apps then not a big deal, paid apps obviously means you would have to buy them twice.

When I try installing Firefox 6.0 from the binary file, a box with "Run As" in the type field appears, which asks me for user name and password. Please advise about the course of action that I should take.

Trying to run it as the current user, or as one from a different account(administrator in this case) also doesn't work.

I think the client is not able to do a HTTP POST
to the WLS server but it can do a HTTP GET.
I dont know why.
http://manojc.com
"Ganesh" <[email protected]> wrote in message
news:3eba91bc$[email protected]..
>
Hi,
I deployed a rpc web service using WLS 7.0 SP2 in HP-UX 11 environment.When I
invoke the web service through my browser (IE 6.0) using the web servicesurl,
it brings my service method correctly. From there, if I click the invokebutton
it asks me for a network user name and password under "weblogic" realm???If I
provide the admin user credentials (which I supplied while creating mydomain)
it is not accepting that it keeps popping up this network user passwordwindow
over and over. Not sure which username/password I have to provide here tosee
the result of my service.
If I try to invoke the web service through my client (static) I am gettinga connection
refused exception. I guess either way, I am not able to access my webservice.
In the attached file, I have cut and pasted the client stack trace as wellas
the server log trace from weblogic.
Any ideas would be highly appreciated.
Thanks,
Ganesh

My computer is authorized, but when I try to open a recently downloaded audio file I get asked for my "Audible username and password" and my AppleID and password do not work

My computer is authorized, but when I try to open a recently downloaded audio file I get asked for my "Audible username and password" and my AppleID and password do not work.

thats because audible isnt apple provided, its a third party app/website so you'll have to get it from them

HT4245 When I try to activate iMessage and while I write my correct password I I receive message say that my user name and password is incorrect although I was use iMessage service on the same network (etisalat ) U.A.E before I update to ios6

When I try to activate iMessage and while I write my correct password I I receive message say that my user name and password is incorrect although I was use iMessage service on the same network (etisalat ) U.A.E before I update to ios6
Note : my iPhone is been swapped 2 weeks ago and I already erase all data in old I phone

1) Go here: http://www.apple.com/support/appleid/manage/
2) Click on Sign in to manage your Apple ID
3) Click on Manage your Apple ID
4) Type in your Apple ID and Password and click Sign in
5) Select Addresses from the left hand side
6) Click Edit
7) In country region type United Kingdom
8) Click Save at the bottom of the page
9) Go to your Apple Device Settings - General - International - Region Format - Select United Kingdom
10) Press the Home button
11) Log into Facetime and iMessage with your CORRECT APPLE ID AND PASSWORD
This should work for all of you guys. Hope it helps.

HT204053 I have an Apple ID and use I Cloud with my Ipad and Iphone. I am trying to publish a website from my macbook but my user name and password is not recognised when I try?

I have an Apple ID and use I Cloud with my Ipad and Iphone. I am trying to publish a website from my macbook but my user name and password is not recognised when I try?

Ken.Lloyd wrote:
Sorry for the delay. System preferences icloud is not an option for me. Syst preferences mobileme is
The minimum requirement for iCloud is Lion 10.7.2 - earlier systems don't show the iCloud preference pane. If you want to use iCloud you will have to upgrade to Lion or Mountain Lion (assuming your computer meets their requirements) but even so you won't be able to publish web pages to iCloud because it does not provide web hosting. This page examines that situation in more detail:
http://rfwilmut.net/missing2

HT3529 I have iMessage service in my mac & it works perfectly. I buy iPhone 5 When I sign in with my appleid to activate iMessage it says "iMessage Activation The user name or password for ... was incorrect Try again" but its all correct. what do i do? my

I have iMessage service in my mac & it works perfectly.
I buy iPhone 5
When I sign in with my appleid to activate iMessage it says "iMessage Activation The user name or password for ... was incorrect Try again" but its all correct. what do i do?
my appleid is from saudi iTunes Store
I'm so disappointed

1. Make sure software is up to date
2. Make sure Messages is enabled; Settings>Messages
3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
4. Make sure Push Notification is enabled
5. Make sure phone number or email address is correct
6. Hold the Sleep and Home button down (together) until you see the Apple Logo

When I try to purchase new app or update apps on iPad it tells me user name is disabled. I have done all the "tricks" from the tech support on phone and still not working.

When I try to purchase new app or update apps on iPad it tells me user name is disabled. I have done all the "tricks" from the tech support on phone and still not working.

Contact Apple Support
https://expresslane.apple.com/GetproductgroupList.action
Apple ID: "This Apple ID has been disabled for security reasons" alert appears
http://support.apple.com/kb/ts2446
 Cheers, Tom

When I try to play my audio books it tells me my user name and password are incorrect

When I try to play my audio books it asks me for my user name and password but it won't accept it!

Read here:
http://support.apple.com/kb/TS4268

I upgraded to lion. I now have the spinning wheel on the startup screen when I try to enter my user name and password. I tried shutting down and restarting, no luck

I upgraded to lion. I now have the spinning wheel on the startup screen when I try to enter my user name and password. I tried shutting down and restarting, no luck

Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

I receive an error stating user name and password are not valid on my ipad and iphone 3Gs when attempting to load email from my icloud account. When I log onto icloud from my Mac, it wont load the email either.

One day, my ipad and iphone pick up my emails (.mac account) from icloud just fine. the next day, I recieved error messages that say my user name and password are not accurate. I removed the icloud program on both devices and added it back on to both devices and get the same message. I logged into icloud from my Mac and while I can log in, it times out when I select email and wont load the email there either. Any Suggestons?

I am having the same problem; it started about 24-36 hours ago.
I know my ID/PW combo are correct because I can access all other aspects of iCloud except mail.
iPhone -- returns incorrect ID / Password
iPad -- Same
Mail.app on Mac -- returns incorrect password error
icloud.com -- allows me to log in and use all functions accept mail. When I try to use mail it stays on a white screen for about 60 seconds then returns a dialogue box that indicates a server error.
I contacted Apple and they placed my iCloud account into something called "Troubleshooting" mode. They generated a new strong password and sent it on to "Engineering."
I suspect there are a small number ofo users like you who are affected with the same problem I am. Too small a number for it to be reported as an outtage. I suggest you call Apple and open a case to have your mail investigaged.
Hope this helps...

I'm trying to access a forum that requires a user name and password. When I do it on my mac it tells me the password is incorrect but when I do it on my iPad, I can access it without any problem. I can confirm the username and password are the same

I am trying to access a forum for which you need a username and password but it keeps telling me the username/password i've entered are incorrect. Bizarrely, when I enter the same username/password combination on my iPad, it grants access without any problem.
What could be causing this, is it an issue with cookies, caches or similar. How can I resolve it? The forum administrator is at a loss as to what the problem is.

Try the following steps in Safari to see if they help:
1) First try clearing the Safari cache. To do this pull down the Safari menu and select 'Empty cache...', then try logging into the site again.
2) If the issue continues then reset Safari by pulling down the Safari menu and select'Reset Safari...'. You will be presented with a list of items that can be reset. I suggest selecting the 'Reset saved names and passwords', and 'Remove all website data' options at a minimum.
Here is a list of the options and what they do. I pulled it from the Safari help page.
Clear history:
Clears the list of webpages you viewed.
Reset Top Sites:
Clears any changes you made to Top Sites, such as adding or pinning sites. If you also clear your history, your Top Sites page reverts to showing the webpage previews displayed when you first installed Safari.
Remove all webpage preview images:
Clears any thumbnail images Safari saved of webpages you viewed.
Clear the Downloads window:
Clears the list of files you downloaded from websites. Only the names are removed; the files themselves are still on your disk until you remove them.
Remove all website icons:
Removes website icons, which are small graphics that help identify sites on the Internet. You see them in the Safari address field and bookmarks list, and other places. These icons are stored on your computer.
Remove saved names and passwords:
Removes user names and passwords that Safari automatically fills in at websites that require them (if the AutoFill feature is turned on).
Remove other AutoFill form text:
Removes some personal information, such as telephone numbers, that Safari uses to automatically fill in forms on webpages (if the AutoFill feature is turned on). Removing AutoFill information does not remove information from your address book.
Close all Safari windows:
If you don’t close all Safari windows, someone could use the Back and Forward buttons to view the webpages you visited.
Reset all location warnings:
Clears any information websites saved about your location.
Remove all website data:
Removes cookies, tracking information, and other data that websites stored on your computer.

HT203261 When i open my email it comes up with The user name or password is incorrect. This has only come up in the last day. As far as I am aware the user name and password is correct. Can you please advise.

My email has been working fin. however In the last day or so when i open my email or send an email it comes up with,
The user name or password is incorrect. As far as I am aware the user name and password is correct. Can you please advise.
Declan Jackson

Try going into Settings > Mail, Contacts, Calendars and select that email account and try re-typing in the account's username and password

EBS 7.3 "Could not authenticate this user name and password, try again"

I have just install Sun StorEdge Enterprise Backup Software 7.3 on a new Solaris 10 (06/06) system. I have installed the following packages with no errors: SUNWebsc (Client), SUNWebsn (Storage Node), SUNWebss (Server), SUNWebsm (Man pages) and SUNWebsg (Console).
I have executed the �nsraddadmin� command for both root and administrator.
I start the web browser with http://<hostname>:9000 and the java software loads with no errors. But when I try to login for the first time with administrator/administrator, I get the follow error:
ERROR: Could not authenticate this user name and password, try again�

I think the client is not able to do a HTTP POST
to the WLS server but it can do a HTTP GET.
I dont know why.
http://manojc.com
"Ganesh" <[email protected]> wrote in message
news:3eba91bc$[email protected]..
>
Hi,
I deployed a rpc web service using WLS 7.0 SP2 in HP-UX 11 environment.When I
invoke the web service through my browser (IE 6.0) using the web servicesurl,
it brings my service method correctly. From there, if I click the invokebutton
it asks me for a network user name and password under "weblogic" realm???If I
provide the admin user credentials (which I supplied while creating mydomain)
it is not accepting that it keeps popping up this network user passwordwindow
over and over. Not sure which username/password I have to provide here tosee
the result of my service.
If I try to invoke the web service through my client (static) I am gettinga connection
refused exception. I guess either way, I am not able to access my webservice.
In the attached file, I have cut and pasted the client stack trace as wellas
the server log trace from weblogic.
Any ideas would be highly appreciated.
Thanks,
Ganesh

Hello,when i try to go to a website,i ca'nt log in because my user name and password pops up from another site,very frustrating,thank you.

Similar Messages

Maybe you are looking for