Hello World CANNOT FIND SPECIFIED INSTANCE

I started with the BPEL PM Training http://www.oracle.com/technology/products/ias/bpel/pdf/orabpel-Training-Segment01.pdf.
1. The screens are not the same as in JDeveloper 10.1.3.2.0.4066...
2. I was able to compile hello world
3. when i went to bpel console the hello world was not there so i used the deploy button and did the deploy it manually
4. I was able to see the process
5. However, when I ran it and went to audit instance, i get the error message "cannot find the specified instance"
6. the solution said 'if the instance has recently been initiated, the invocation data may not have been delivered to the engine yet. Refresh your browser window and try again in a few seconds"
7. I tried both several times and get the same error message
Anyone know how to fix this?
I am running DHCP with the loopback adapter - is that a problem?
Much appreciated.

Fi,
See the below link will helful to you,
Informatica Start Workflow failed in Workflow Manager
Note: FYI this is not right area to get answers for your questions related to ETL.
Thanks,
Balaa...

Similar Messages

Cannot find specified parameter file informatica

Hello
I am running DAC for the first time.Then i went through Workflow monitor.
N it is showing This error
cannot find specified parameter file informatica!!!

Fi,
See the below link will helful to you,
Informatica Start Workflow failed in Workflow Manager
Note: FYI this is not right area to get answers for your questions related to ETL.
Thanks,
Balaa...

Nokia 9500 problem: cannot find specified server

After some deliberation, I have finally managed to connect my Nokia 9500 to the internet via the WLAN router in my home. So I can access websites ok, although it's slow and some of the webpage elements don't load. Anyhoo... my problem is with Real audio files now. For some reason, it won't download them to my phone when I click save, it just gives me the message "cannot find specified server" and doesn't download anything. I even get this message sometimes as webpages are loading, but after clicking "ok" it continues to load the page and seems to work fine. Anyone know what the problem could be? I'm using a T-mobile pay-as-you-go sim in my phone and my ISP is Tiscali. Thanks in advance.

Hi,
The problem is that your internal machines need to access the server's dns to resolve the host name.
2 steps.
1. Ensure that DNS in server.app is forwarding requests to your ISP dns server and that server is set to provide DNS
for some or all clients and that you have your DNS primary zone setup with a machine record for the server.
2. Change the DNS server address within network settings on all other devices to the servers tcpip address.
Hope that helps
Cheers
Gerry

Hello, I cannot find my music Can some one walk me through it?

Hello, I cannot find my music. Can someone walk me through it? Thank you

Look on your computer.
Without more details... I do not know many people that would take the significant time necessary to detail out every possible scenario.

Photosmart C4780 install fails at "system cannot find specified file"

My problem started simply with the printer, an HP Photosmart C4780 which has always had a wireless connection and would not print. At first, the network connection checked out fine from the printer control panel. I ran a Microsoft printer troubleshooter, which found a block in the print queue, and cleared it. The first test page would not print, but the "inner test page" did print. I didn't understand whatever that meant, so I looked for help from the HP site.
I ran the HP Print and Scan Doctor, and it suggested I reinstall the driver. I downloaded and saved the current one from HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver. When I attempted to install the new one, a window popped up saying, "The system cannot find the specified file," with only one box to click which said simply "OK". The installation went through to "review installation options", after which came “checking updates, downloading updates, installing updates” and then it was while “checking system” that the “cannot find the file” window popped up, and when I clicked “OK”, the installation window as well as the error message box, just disappeared. What I assume was the file path was in the frame of the window, but the whole thing didn't fit so it didn't show the end. What I could read was “C:\Users\ … \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40 …
I found one topic on the same problem for the same model printer in the forum, which offered this fix:
You will need to first complete a level 3 uninstall of the software. I have included the steps below for this.
1. Press the Windows key, and the letter R
2. Type %temp%, and click OK
3. Open the 7z folder (most recent one if there are multiples)
4. Open the util folder
5. Open the ccc folder
6. Double click on the Uninstall_L3
Once the Uninstall_L3 has completed, please delete all items listed in the temp folder. Note, you will not be able to to delete all items, please skip the ones that you cannot. Next please empty the trash, and perform a clean boot. I have included the document 'How to perform a clean boot in Windows'. If your computer does not request it, please restart your computer.
Once your computer is back up, you will need to reinstall the printers software. You can either do this by using the Installation CD, or downloading the software.
I did what was suggested, until it got to the point where it said it did not recommend removing any further items if I intended on using the HP Officejet printer (yes I have a second HP printer attached to the network) anytime in the future. Not really understanding how this all works, I decided to stop what I was doing, so unfortunately it did not solve my problem.
Do I need to uninstall both HP printers before I can reinstall one? And if I do that, is there any reason I would not be able to reinstall both printers? Sounds like I'm asking for trouble. Bottom line... I still cannot install the driver.
I have tried to install both the full and basic versions of the driver and always get the same result.
I have an HP Pavilion dv6-3100t notebook, running Windows 7 Home Premium, version 6.1.7601 service pack 1, 64 bit. I haven't installed any new hardware or software. This printer has always had a wireless connection. The router I use is a Netgear 54 Mbps WGR614 v6 (supplied by my cable company), and the network includes not only my notebook and the Photosmart printer, but also an ASUS desktop, another HP printer, an Officejet 6300 series (used only for printing graphics and photos with a wired connection to the router), and a Vizio smart-TV. I use Norton 360 Premier Edition and disabled the anti-virus auto-protect when I downloaded and attempted to install the driver.
Please help! And thanks in advance for your time and attention.
This question was solved.
View Solution.

Hi wakey-wakey,
I would recommend accessing your Temp folders, rename a Temp folder to 7zS588E and run the installation from that folder.
Please keep me posted.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Cannot find new instances in the workspace

I use BPM Standalone 10g and Studio 10g.
I create a process without a global creation activity and deploy as well as publish it in the BPM Standalone.
The process just has one activity named Interactivejcooper. Its main task is set to Method.
I also create a JAVA PAPI to create new instances of this process. It can create new instances.
However, I cannot find all new instances created by PAPI in the workspace.
The following code is in the PAPI.
--------------------code------------------------
package piic;
import fuego.lang.ConnectionPassport;
import java.util.Properties;
import fuego.papi.Arguments;
import fuego.papi.CommunicationException;
import fuego.papi.InstanceInfo;
import fuego.papi.ProcessService;
import fuego.papi.ProcessServiceSession;
import fuego.papi.OperationException;
import java.util.Properties;
public class Class1 {
public Class1() {
public static void main(String[] args) throws CommunicationException, OperationException {
Class1 class1 = new Class1();
Properties configuration = new Properties();
configuration.setProperty(ProcessService.DIRECTORY_ID, "default");
configuration.setProperty(ProcessService.DIRECTORY_PROPERTIES_FILE, "D:\\BPM_HOME_standalone\\webapps\\papiws\\WEB-INF\\directory.xml");
configuration.setProperty(ProcessService.WORKING_FOLDER, "/tmp");
ProcessService processService = ProcessService.create(configuration);
ConnectionPassport passport = processService.createPassport("jcooper");
passport.setPassword("welcome1");
passport.fillPassport();
ProcessServiceSession session = processService.createSession(passport, "localhost");
for (String processId : session.processesGetIds()) {
System.out.println("\n ProcessID: " + processId);
String processId = "/Processwithoutglobalstart";
String argumentName = "MyArgument";
Object argumentValue = new Object();
Arguments arguments = Arguments.create();
arguments.putArgument(argumentName, argumentValue);
session.processCreateInstance(processId, arguments);
System.out.println("49-----------");
for (String processId2 : session.processesGetIds()) {
System.out.println("\n ProcessID: " + processId2);
for (InstanceInfo instance : session.processGetInstances(processId2)) {
System.out.println(" instance.getId()-> " + instance.getId());
System.out.println(" activity.getActivityId()-> " +instance.getActivityId());
System.out.println(" activity.getActivityName()-> " +instance.getActivityName());
session.close();
processService.close();
----------------------println----------------------------------
E:\Jdeveloper10131_20090318\jdk\bin\javaw.exe -client -classpath E:\Jdeveloper10131_20090318\jdev\mywork\PAPInewInstancewithoutCreation\Project1\classes;D:\BPM_HOME_standalone\client\papi\lib\b1util.jar;D:\BPM_HOME_standalone\client\papi\lib\b1oracle.jar;D:\BPM_HOME_standalone\client\papi\lib\b1base.jar;D:\BPM_HOME_standalone\client\papi\lib\fuegopapi-client.jar piic.Class1
Creating connector [fuego:SQL]
Creating ProcessService with id 'oracle/2009-03-31 18:08:47+08:00'.
Creating local folder: /tmp\system\Schema3387192-1796619082\catalogs
Loading catalogs from local folder: /tmp\system\Schema3387192-1796619082\catalogs
0 jars found locally.
[CatalogMgrCache] =======================
Registering CatalogMgr [oracle/2009-03-31 18:08:47+08:00] ...CatalogManagerCache 1465214:
Managers:
Counters:
[CatalogMgrCache] =======================
CatalogMgr [oracle/2009-03-31 18:08:47+08:00] REGISTERED!CatalogManagerCache 1465214:
Managers:
{oracle/2009-03-31 18:08:47+08:00=fuego.util.LocalCatalogManager@1d0d124}
Counters:
ProcessService 'oracle/2009-03-31 18:08:47+08:00' created successfully.
ProcessID: /InvokeJava2#Default-1.0
ProcessID: /Process#Default-1.0
ProcessID: /ProcessB#Default-1.0
ProcessID: /Processwithoutglobalstart#Default-1.0
ProcessID: /Testprocess#Default-1.0
Unreachable Engine Tolerance (seconds):
by default: 0
to be used: 0
This papi client will not cache exceptions which imply that an engine could not be reached.
Adding local catalog for project: 163
Processing the synchronization information, instance '163:247:0' was created.
49-----------
ProcessID: /InvokeJava2#Default-1.0
instance.getId()-> /InvokeJava2#Default-1.0/242/0
Adding local catalog for project: 162
activity.getActivityId()-> /InvokeJava2#Default-1.0/tojava
activity.getActivityName()-> tojava
ProcessID: /Process#Default-1.0
ProcessID: /ProcessB#Default-1.0
ProcessID: /Processwithoutglobalstart#Default-1.0
instance.getId()-> /Processwithoutglobalstart#Default-1.0/243/0
activity.getActivityId()-> /Processwithoutglobalstart#Default-1.0/Interactivejcooper
activity.getActivityName()-> Interactivejcooper
instance.getId()-> /Processwithoutglobalstart#Default-1.0/244/0
activity.getActivityId()-> /Processwithoutglobalstart#Default-1.0/Interactivejcooper
activity.getActivityName()-> Interactivejcooper
instance.getId()-> /Processwithoutglobalstart#Default-1.0/247/0
Session 'jcooper7676692326836000001' has been closed.
activity.getActivityId()-> /Processwithoutglobalstart#Default-1.0/Interactivejcooper
activity.getActivityName()-> Interactivejcooper
instance.getId()-> /Processwithoutglobalstart#Default-1.0/246/0
activity.getActivityId()-> /Processwithoutglobalstart#Default-1.0/Interactivejcooper
activity.getActivityName()-> Interactivejcooper
instance.getId()-> /Processwithoutglobalstart#Default-1.0/245/0
activity.getActivityId()-> /Processwithoutglobalstart#Default-1.0/Interactivejcooper
activity.getActivityName()-> Interactivejcooper
ProcessID: /Testprocess#Default-1.0
[CatalogMgrCache] =======================
Unregistering CatalogMgr [oracle/2009-03-31 18:08:47+08:00] ...CatalogManagerCache 1465214:
Managers:
{oracle/2009-03-31 18:08:47+08:00=fuego.util.LocalCatalogManager@1d0d124}
Counters:
{oracle/2009-03-31 18:08:47+08:00=1}
[CatalogLoaderMgr] unregisterCatalogMgr freeing resources of LocalCatalogManager
[CatalogMgrCache] =======================
CatalogMgr [oracle/2009-03-31 18:08:47+08:00] UNREGISTERED!CatalogManagerCache 1465214:
Managers:
Counters:
Process exited with exit code 0.

I don't know what happens. It works after I restart BPM studio in 2 hours.

Cannot find specified file?

so i just got a 30 gig 5gen iPod a couple days ago.
i went to link it with my PC, and a screen pops up and says
"an error occured during the installation of this device
The system could not find the file specified"
iTunes dosen't see it, neither does my computer.
any tips?

I got exactly the same error mesage for thelast week or so.
I checked and the iPOD still gets updated and synchronized, I believe. However, there must be some file that's missing, is corrupt or must have been deleted (I certainly did not delete it manually) that the Synchronization process cannot find.
The problem is that I am unable to find that file, and iTunes does not have a detailed error log to find out what file it has trouble with. Is there any way to find out?

Cannot find specified path?

I'm trying to scan a document, something I've done many times before. Today, when the scanner is finished a box pops up that says 1/1 document scanned and cropped and then another box with an exclamation mark pops up that says Unable to save file. The system cannot find the the path specified.
???????

It seems that your scanning software has a setting for a path to a particular folder. Either you have changed that setting, or you have rearranged your file system thus changing the path. You need to modify your software to accommodate the new path.
My suggestion: Locate the proper folder in Finder or Spotlight and make note of the path. Then goto your scanning software and adjust the setting to that path.
Another idea: Set the path in your software to save to your desktop. Any scans you wish to save, move them to the desired folder manually and Trash the undesirable scans. -GDF

Hello i cannot find personal hotspot in my iphone 4s

i cannot find personla hotspot in the setting

Does your cell phone carrier support tethering/personal hotspot?
If so, does your data plan with your carrier include a tethering opton?

C4599 printer cannot find file specified

Downloaded PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe and tried to install c4599 printer. Get error System cannot find specified file "BlockSysUserInstall.exe which located in the Temp directory. I have noted it keeps referring to a hardcoded "7zS2F4B". Have tried renaming file in Temp directory to "7zS2F4B" but still no install.
This question was solved.
View Solution.

Hi foberg,
Follow the steps below to update the software to the latest version.
Step one: Clear temp directory
1. Type %temp% in the run or search for programs and files field
2. Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
3. Continue with Step 2 below
Step two: Downloaded and extracted to your system:
1. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-74912-1&cc=us&dlc=en&lc=en&...=
2. Once the download is finished double click on the file to extract the software.
3. When the installation window opens press the cancel button to stop the installation
4. Type %temp% in the run or search for programs and files field
5. Look for, and open the folder starting with 7z (Example: 7zS2356)
6. Right click on the folder, and select Copy
7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
8. Open the 7z folder you just copied to your desktop
9. Open folder Util
10. Open folder CCC
11. Run the uninstall_L4
12. When the uninstall has completed restart the computer
13. Run Disk cleanup from Accessories\ System Tools folder under all programs
14. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
Let me know what you find out?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Cannot find BLOB Download Format Mask link.

Hello,
I cannot find the "BLOB Download Format Mask" link and I am using a current version of APEX. can someone tell me where I might find it? I have followed the instructions and see no such link under Page Item, Source. Please help!
Thanks
LEH

Scott,
Yes, I have created a form on a table and that table contains a column of datatype BLOB. I followed the APEX advanced tutorial for uploading and downloading files. Now I want to be able to display the (Blob) images that I have uploaded.
As I research the topic, I get the feeling that displaying the BLOB image can only be done in APEX 3.1 and up. Is this true? I have that version of APEX installed on my laptop and have successfully completed the "Defining and Viewing BLOB Data in Oracle Application Express 3.1" tutorial found here: http://www.oracle.com/technology/obe/apex/apex31nf/apex31blob.htm
But I could not do it on the company server that runs APEX 3.0
Even if I did get the approval to have the company APEX application upgraded to 3.1, there still is the issue of scaling the images so that they are not so large. I understand that there is a UTIL.APEX function "GET_BLOB_FILE_SRC" that would do this for me. I read the documentation at:
http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10499/api.htm#CHDICGDA
After reading it, I was still not clear as to how to use it correctly. Is there any documentation on how to implement this function in APEX?
I did find something that I was hoping would help me. The article is entitled "Show Blob of other table in APEX Form" by Dimitri Gielis can be found here: http://dgielis.blogspot.com/2008/07/show-blob-of-other-table-in-apex-form.html
I tried to import the file "blob_support.sql" application (on both APEX 3.0 and APEX 3.1 systems) but got errors. I'm not having very much luck here and would appreciate the help in pointing me in the correct direction.
Help!!
Thanks
LEH

Cannot find Equium A210-1C4 support

Hello
I cannot find any information about the Notebook I have it is a EQUIUM A210-1C4 but I cannot find this in the initial drop down for support of the discontinued area.
I need to re-install the operating system but the supplied Product Recovery disk fails each time.
I now have a machine that will not boot and gets to the same stage each time.
Any ideas would be helpful
Cheers

Hi
The Equium A210-1C4 belongs to the PSAFJE series.
You can find this number at the bottom of the unit
So you have to choose the A210 PSAFJE in the driver download form
I think this should be clear enough because instead of model numbers there are no other numbers listed on the driver page
Greets

Fix "Windows cannot find" designated webpage error on launch; only with Epic, not firefox.

When Epic is launched from a desktop Icon calling for a particular web page, it throws up a "Windows cannot find" Specified site error box, but then goes ahead and loads the site. It only happens with Epic; never had this problem with the regular Firefox browser.
I make these Icons by dragging from the address bar once I reach the site. It is a quick way to return later.
Very frustrating, please help.

Firefox 21 and Firefox 22 running on Windows 7 have been reported to take a long time to "wake up" from sleep. I realize hibernation is different than sleep, but... this is the closest match for your description.
Some users have reported that this problem is resolved in Firefox 23 (currently in beta). Others have had inconsistent luck with minimizing Firefox before letting Windows sleep and other measures.
Please check out this (very long) thread for more information: [https://support.mozilla.org/questions/961898 browser freezes after resuming from sleep]
Or jump to the part about Firefox 23: https://support.mozilla.org/questions/961898?page=3#answer-457321
The fact that this just started recently suggests perhaps it is related to another program or update, but I don't think anyone has confirmed the exact interaction that causes the problem.

HT1933 i cannot find agree on itunes terms and conditions

hello,
i cannot find agree on terms and conditions on itunes i have read this twice am i missing this please help.

Is this on your computer's iTunes, on an iPad / iPhone / iPod Touch, or in an email ? If you are on an iOS device and are in the Downloads tab in the iTunes or App Store apps on it then the Ts &Cs link shows when you don't have anything downloading - your music should have downloaded into the Music app, and films and TV shows into the Videos app.

Cannot find the specified instance ???

"If the instance has recently been initiated, the invocation data may not have been delivered to the engine yet. Refresh your browser window or try again in a few seconds."
I am getting the above error when i try to execute a BPEL process that does some DML operation on the database.
I doubt whether this relates to the database.
Please suggest.
Thanks,
Rosh

Hi Marcelo!
I'm having the exact same problem. I've upgraded AS and BPEL PM from 10.1.3.1 to 10.1.3.3 As I found out in another thread (Cannot find the specified instance the problem could be in not running the upgrade sql script, but I did that.
When I initiate my process the number of Open Instances and closed instances remains 0. I've tried by deploying my process to default domain and a new domain I've created but it doesn't matter.
The message in my domain.log file is this:
<2008-01-22 13:52:32,976> <WARN> <MyTestDomain.collaxa.cube> <BaseCubeSessionBean::logWarning> Error while invoking bean "finder": [com.collaxa.cube.engine.core.InstanceNotFoundException: Instance not found in datasource.
The process domain was unable to fetch the instance with key "fa5790576a57cd77:-67b0033:117a188c804:-7fea" from the datasource.
Please check that the instance key "fa5790576a57cd77:-67b0033:117a188c804:-7fea" refers to a valid instance that has been started and not removed from the process domain.
ORABPEL-02152
Instance not found in datasource.
The process domain was unable to fetch the instance with key "fa5790576a57cd77:-67b0033:117a188c804:-7fea" from the datasource.
Please check that the instance key "fa5790576a57cd77:-67b0033:117a188c804:-7fea" refers to a valid instance that has been started and not removed from the process domain.
     at com.collaxa.cube.engine.data.AdminFinder.lookupInstanceByConversationId(AdminFinder.java:287)
     at com.collaxa.cube.ejb.impl.FinderBean.lookupInstanceByConversationId(FinderBean.java:200)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
     at com.evermind.server.ThreadState.runAs(ThreadState.java:646)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:43)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at FinderBean_RemoteProxy_4bin6i8.lookupInstanceByConversationId(Unknown Source)
     at com.oracle.bpel.client.Locator.lookupInstance(Locator.java:448)
     at displayInstance.jspService(_displayInstance.java:123)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:131)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
I'd appreciate any suggestions on this.
Thanks!
BB

Hello World CANNOT FIND SPECIFIED INSTANCE

Similar Messages

Maybe you are looking for