Help, 10.6.8 update, all usb ports stop working after 10hrs

I've been running 10.5.8 for ever and finnaly tried to update to 10.6.8.. After I did it, the usb ports all kick out any connected devises after around 10 or so hours. I ran of the install disk, using disc utillty, disk repair, and repair permisions a few times and it did not help.
I did the install a few times again to try to see if it would help and didnt.
i tried an erase and install and migrated everything over from my orignal back up external drive that is running 10.5.8 and issue is still there.
My old 10.5.8 back up external drive works fine and does not have this issue, and I have been using that as my start up drive instead and working from there. But that is not really a solution and a temp work around.
Any suggestions would really help. thanks!

I have a early 2008 macbookpro 2.8 duel with silver keys.
I purchaed the 10.6 disk from the apple store. I've had the machine for years and purchased it refurbished from apple.
I did the erase and install and migrated everything over from external drive, then did update to 10.6.8 and the usb ports still would stop working after a few hours.. Then I read on another apple community forus to reset pram, and pull out the power cable, take out the battery and hold power key for 5 seconds, then restart. that seemed to fix usb issue so far..
But overall my computer seems to be running slower then when using just 10.5.8 and it did not wake from sleep once and I had to force power off and restart.. But maybe its just getting used to 10.6.8. we will see..
Also, on another note, my battery is totally dead, and I can only run computer with power cable.. Will this affect things? it never did with 10.5.8..
Oh, on my erase and install, I just did the simplest version and did not do the full erase to zero using he advanced security measures.. I just did the one where it writes on top of everything..

Similar Messages

1 of 2 USB ports stopped working after 10.7.2 upgrade

I have the newest Macbook Pro. I upgraded to 10.7.2 today and immediately after, 1 of my 2 usb ports stopped working.   Thought it may be the cable, so I switched cables. Tried plugging in my iPhone, my portable drive and nothing.   Both work on the other port though.   Both ports worked fine before the update.
I've rebooted 4x.
Suggestions?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

Right USB Port stops working after disconnecting device since 10.9.2

Hi,
Since updating to 10.9.2 the right USB port on my MBA stops working after diconnecting a device (tested: external hard drive, USB flash drive, USB HSPA Modem). The only way to get the port recognizing the device on that port is to do a restart. If the device is connected from starting the MBA it works fine, if I then eject the drive and reinsert it or a different USB device the device doesn't get recognized. The devices do get power, my WD passport ultra spins up just fine, the USB HSPA modem also indicates it's working (with signal) but nothing shows up in finder or diskutility. If the modem is connected from start (and thus working) and then disconnect from the internet but not remove the drive I can reconnect to the internet. The problem only occurs after disconnecting the device. The port becomes inactive. The left USB port works as expected.
Steps I've taken:
Disk Persmission
PRAM
SMC
Reapplied the 10.9.2 update
Sent feedback to Apple
Some Output:
Boot Mode: Normal
Total CPU usage:
   User 11%                    System 10%
Max %CPU by process (name, UID, %):
   WindowServer         0   4.6
Loaded extrinsic kernel extensions:
   at.obdev.nke.LittleSnitch (4052)
   com.driver.JRDUSBModemData64 (4.0.5)
   com.protech.NoSleep (1.3.3)
Loaded extrinsic daemons:
   net.sourceforge.MonolingualHelper
   com.oracle.java.JavaUpdateHelper
   com.oracle.java.Helper-Tool
   com.microsoft.office.licensing.helper
   com.freemacsoft.appcleanerd
   com.adobe.fpsaud
   at.obdev.littlesnitchd
Loaded extrinsic user agents:
   com.oracle.java.Java-Updater
   at.obdev.LittleSnitchUIAgent
/Library/LaunchAgents:
   at.obdev.LittleSnitchUIAgent.plist
   com.oracle.java.Java-Updater.plist
/Library/LaunchDaemons:
   at.obdev.littlesnitchd.plist
   com.adobe.fpsaud.plist
   com.freemacsoft.appcleanerd.plist
   com.microsoft.office.licensing.helper.plist
   com.oracle.java.Helper-Tool.plist
   com.oracle.java.JavaUpdateHelper.plist
   net.sourceforge.MonolingualHelper.plist
/Library/PrivilegedHelperTools:
   com.freemacsoft.appcleanerd
   com.microsoft.office.licensing.helper
   com.oracle.java.JavaUpdateHelper
   net.sourceforge.MonolingualHelper
Extrinsic loadable bundles:
   /System/Library/Extensions/JRDMassStorageDriver32.kext
             (No bundle ID)
   /System/Library/Extensions/JRDMassStorageDriver64.kext
             (No bundle ID)
   /System/Library/Extensions/JRDUSBModemData32.kext
             (com.driver.JRDUSBModemData32)
   /System/Library/Extensions/JRDUSBModemData64.kext
             (com.driver.JRDUSBModemData64)
   /System/Library/Extensions/LittleSnitch.kext
             (at.obdev.nke.LittleSnitch)
   /System/Library/Extensions/NoSleep.kext
             (com.protech.NoSleep)
   /Library/Audio/Plug-Ins/Components/A52Codec.component
             (com.shepmater.A52Codec)
   /Library/Internet Plug-Ins/Flash Player.plugin
             (com.macromedia.Flash Player.plugin)
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
             (com.oracle.java.JavaAppletPlugin)
   /Library/PreferencePanes/Flash Player.prefPane
             (com.adobe.flashplayerpreferences)
   /Library/PreferencePanes/JavaControlPanel.prefPane
             (com.oracle.java.JavaControlPanel)
   /Library/PreferencePanes/NoSleep.prefPane
             (com.protech.NoSleepPref)
   /Library/QuickTime/AC3MovieImport.component
             (com.cod3r.ac3movieimport)
   /Library/Spotlight/LogicPro.mdimporter
             (No bundle ID)
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
             (com.skype.skypeabdialer)
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
             (com.skype.skypeabsms)
   Library/QuickLook/Pacifist.qlgenerator
             (com.charlessoft.pacifist.qlgenerator)
   Library/Services/Clip to Day One.workflow
             (No bundle ID)
Login hook:
   /Library/Scripts/Hooks/login.sh
Global login items:
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
User login items:
   iTunesHelper
   Sparrow
   Sort Menubar Items
   AppCleaner Helper
   SurplusMeterAgent
Safari extensions:
   Shut Up
   AdBlock
   SafariKeywordSearch
   Disconnect
   MapTricks
Restricted user files: 28
Font problems: 0
Elapsed time (s): 130
etrecheck output:
Hardware Information:
          MacBook Air - model: MacBookAir3,1
          1 1.4 GHz Intel Core 2 Duo CPU: 2 cores
          2 GB RAM
Video Information:
          NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:20
Disk Information:
          APPLE SSD TS064C disk0 : (60.67 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    disk0s2 (disk0s2) <not mounted>: 59.81 GB
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          EFI (disk2s1) <not mounted>: 209.7 MB
          Radha (disk2s2) /Volumes/Radha: 1.81 TB (1.73 TB free)
          disk2s3 (disk2s3) <not mounted>: 189.89 GB
          Boot OS X (disk2s4) <not mounted>: 134.2 MB
FireWire Information:
Kernel Extensions:
          at.obdev.nke.LittleSnitch          Version: 4052
          com.driver.JRDUSBModemData64          Version: 4.0.5
          com.protech.NoSleep          Version: 1.3.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
                 [loaded]          at.obdev.littlesnitchd.plist
                 [loaded]          com.adobe.fpsaud.plist
                 [loaded]          com.freemacsoft.appcleanerd.plist
                 [loaded]          com.microsoft.office.licensing.helper.plist
                 [loaded]          com.oracle.java.JavaUpdateHelper.plist
                 [loaded]          net.sourceforge.MonolingualHelper.plist
Launch Agents:
                 [loaded]          at.obdev.LittleSnitchUIAgent.plist
User Launch Agents:
User Login Items:
          iTunesHelper
          Sparrow
          Sort Menubar Items
          AppCleaner Helper
          SurplusMeterAgent
3rd Party Preference Panes:
          Flash Player
          Java
          NoSleep
Internet Plug-ins:
          Default Browser.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Top Processes by CPU:
              12%          com.apple.WebKit.Networking
               6%          Safari
               4%          WindowServer
               3%          EtreCheck
               2%          hidd
               1%          Terminal
               1%          notifyd
               1%          opendirectoryd
               1%          com.apple.WebKit.WebContent
               0%          Dock
Top Processes by Memory:
          147 MB          Safari
          137 MB          com.apple.WebKit.WebContent
          49 MB          mds_stores
          29 MB          com.apple.WebKit.Networking
          27 MB          TextEdit
          23 MB          WindowServer
          20 MB          Disk
          20 MB          Sparrow
          20 MB          CVMCompiler
          18 MB          Finder
Nothing out of the ordinairy. Thanks for any help

It's an Apple Pro keyboard and mouse, the dongle is
plugged into the Mac and not the keyboard. The same
set-up is, and has been working on all our other
Macs.
The sleep issue sounds interesting- hum, maybe...
Is your keyboard plugged into one of the USB connections on an Apple monitor? If so, you may want to change that connection to one that is on the G5 itself. My monitor came with a warning note indicating that problems will likely occur if the keyboard is connected to the monitor.
I also had a problem with the automatic sleep function. After much trouble-shooting and a logic board replacement, it was concluded that coming out of the automatic sleep function with any USB device active would freeze the entire USB bus. After disabling automatic sleep in system preferences, I've had no freezing problems. My machine works fine with the manual sleep function in the Apple Menu.
AndyH

First USB port stops working after random time and won't work until I restart

Hey guys
I have this problem on my late 2011 Macbook Pro 13 inch,
It's been for a year already and it really freaks me out and drive me crazy
My first USB port next to the thunderbolt stops working after like 3 days, and it won't respond until I restart my computer or log off and log in again.
If I restart my computer, USB stops working after 3 days and won't respond until I restart
If I log off it works for like a couple of hours and then stops again
I have tried EVERYTHING, SMC reset - no luck, PRAM reset - same results, Upgraded to lion same results, Upgraded to mountain lion - SAME RESULT
And I can't take it to an apple store because I'm not from the US
I am 100% sure this is a software problem and I've seen here that many people have faced this problem
Please help, it really freaks me out

ElectroSpyzz wrote:
Hey guys
I have this problem on my late 2011 Macbook Pro 13 inch,
It's been for a year already and it really freaks me out and drive me crazy
My first USB port next to the thunderbolt stops working after like 3 days, and it won't respond until I restart my computer or log off and log in again.
If I restart my computer, USB stops working after 3 days and won't respond until I restart
If I log off it works for like a couple of hours and then stops again...
I'm sure this isn't what you want to hear but unless you really are using your laptop 24 hours a day, is there any reason why you don't just shut it down and reboot when you're ready to use it again? I have to wonder how many other MacBook Pro owners potentially have the same problem but when they quit computing for the day, their computers quit too.

Z87-G45 all USB ports stop working until I reboot

Hello everybody, This is my first post on these forums due to this problem, and I hope some people can help me out.
In February, I purchased myself a Z87-G45 motherboard along with all the other components needed to build a gaming PC, the build went brilliantly considering it was my first time!
About 3 months into my new build I started having problems with my PC, especially my USBs directly connected to the motherboard and the ones at the front of my PC as well, I have a back lit
keyboard and mouse and the lights started flickering erratically like it was being connected and disconnected extremely quickly, then after about 10 seconds of it doing that, they both stop working.
The lights on my mouse completely go out as if it had being disconnected but the keyboards lights are still on, but none of the keys work.
Sometimes I can do a 6 hour gaming session with my mouse or keyboard not playing up at all, but other times it happens within 5 minutes of booting up my PC!
My PSU failed at one point, and when I used a lower power PSU until my replacement came, none of these issues occurred.
I really want to get to the bottom of this because I cannot game while my peripherals are cutting out mid game!
My specs are:
Intel Haswell i7-4770k Processor
MSI G87-G45 motherboard
Nvidia GTX 780 Graphics card
AX860 Corsair 860Watt PSU
Seagate 3TB Barracuda HDD
Sandisk 128GB SSD
16GB Vengeance Pro Black 1866MHz CL9 Memory
Windows 7

Can you download CPU-Z. Then check the Mainboard Tab in CPU-Z and check the what revision your Southbridge is.
I may be wrong but the USB disconnect after sleep was an inherent bug of the Intel C1 chipset which was corrected in C2. The initial boards all had C1.
It may be that yours is just faulty to the point that it started loosing the USB connection even though its not coming out of sleepmode.
Do check and let us know.
Quote
My PSU failed at one point, and when I used a lower power PSU until my replacement came, none of these issues occurred.
Sorry I missed this part in the initial read.
If that is the case, then it is also possible that you may have a defective PSU. The only way to confirm that is to run with another PSU for an extended period to ascertain if that is a consistent occurrence. If it doesn't happen, well then you know for sure it is PSU related. Also recheck all your connections from the PSU (especially the 24 pin connector)
Are your USB connections on the front panel or are you using the onboard USB connectors on the back?

USB ports stop working after windows 7 installation via USB Boot camp

topend macbook pro retina 15 model purchased in Jan 2014 ,upto date.OS X 10.9.1
tried installing windows 7 ultimate through boot camp using USB. the installation is fine and smooth. windows 7 ultimate is properly installed but the point where you install the support software through USB all the USB ports die out just before logging in into windows. Also a red light on the headphone jack goes on. NO USB flash drive orUSB device is operational or in other words detected by the mac. Hence neither can I finish the support software installation which has all the necessary drivers nor connect to the internet . tried the SMC/NVRAM reset as instructed by the apple support but no change in the situation.
USB ports fully operational when boot in MAC os .
Another problem I face is when I try connect my iphone 4S to macbook pro via USB it keeps connecting and disconnecting and makes the charging sound repeatedly . The same iphone can connect to other laptops flawlessly.
please help .
Thanks

Since you just bought it, you may want to make a Genius Bar appointment and let them diagnose the issue. Use your warranty. Bring your phone and cable along too.

Usb ports stopped working after windows 7 install - pavilion g6-1001sa

After reinstalling windows - My usb ports have completely stopped working - not recognised at all - These happened previously and I was able to download and install a driver which worked - I have been unable to find it this time
thanks
JO
Please help

teethinnit wrote:
I had tried here - the correct driver was not here - it is the USB controller that I am looking for
Ok go to your search bar and type "Change Device installation settings"
and look at my screen shot and this change should make it look for the latest driver.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Macbook pro (late 2011) 17 third usb port stopped working after latest yosemite upgrade...

the "third" port being the one closest to the user while the mbp is open in typical use position in front of the user
regardless of reboots or device plugged in, nothing works (anymore) in that port...

Hey Eyraud,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides general troubleshooting suggestions that may be able to resolve the USB connection issue with your MacBook Pro.
OS X Yosemite: If a USB device isn’t working
If those suggestions don't resolve the issue, try running the Apple Hardware Test as shown in this article:
Using Apple Hardware Test - Apple Support
Take care,
-Jason

Brand new Macbook pro one USB port stopped working

Brand new Macbook Pro 15 with Retina display. One of the USB ports stopped working after 24hours.

Serial Port Configuration and Port definition is reset by
NVRAM http://support.apple.com/kb/ht1379
If no good I would return the machine ASAP:
Genius reservation http://www.apple.com/retail/geniusbar/
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

USB ports not working after OSX 10.9.1 update

I have a late 2011 MBA 13".
The 2 USB ports stopped working as soon as I updated to 10.9.1.
I tried zapping PRAM and resetting the SMC.
I even turned the thing off for hours and still nothing.
Any idea how to fix?
Everything was fine until I did the update.
Thanks.

This is not a known bug affecting 2011 MBA computers with 10.9.1 so there is something wrong with your installation. Since zapping PRAM and resetting the SMC did not work I suggest that you try one of two things but first make sure you have backed up your computer.
1) download Mavericks and reinstall it. Sometimes an update goes awry and a reinstall fixes it. Since doing this won't disturb any of your data or applications it would be my first choice. You'll be downloading 10.9.1 so you won't have to perform any updates.
2) boot into the recovery mode, erase the hard drive and then download and install Mavericks. Once Mavericks is finished installing you'll be asked if you'd like to migrate data and applications from a backup. Say yes and if your backup drive isn't already connect it, do so. Select your applications folder and account folders from the list and let the Setup Manager do its magic.
BTW - this is why one of my several backup hard drives is a cloned backup using Carbon Copy Cloner (SuperDuper! Is another good choice). I can boot up my computer using this backup and download the newest version of Mavericks on it if I haven't already done so. I always quit the installer first and make a copy of it because the installer program deletes itself once it is finished which is something of a pain. It gives me more options including being able to boot my computer with it, erase the computer and copy the installer to the computer rather than having to perform the download all over again if step 1 fails. Since I always download a new copy of the OS when Apple releases an update this computer will have the newest version of the installer so I also can skip the download step of option 1 and just copy it over and install on the computer.

MSI GAMING 5 - ALL USB ports not working

hello
how are you every one
i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
Mouse and keyborad work in bios but if the system run don't work ! and trun off
and all usb devices
in safe mod work
rellay i don't know where is the problem !
CPU : Intel Core i5-4690K
M.B : MSI Z97 GAMING 5
RAM : G.Skill Ripjaws X 8GB DDR3 Kit
GPU : Gigabyte GeForce GTX 970 G1 GAMING
SSD:Corsair force LX 256 GB
HARD: Seagate Barracuda 1 T.B 7200 RPM
CPU COOLER : Cooler Master Hyper 212 Evo
PSU : Cooler Master GM-Series 750 watt
CASE : NZXT Phantom 410
Thank you

Quote from: Nichrome on 28-January-15, 00:18:47
Hi,
What about if you try to install drivers from your product's page?
http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
thank you
i just remove USB3 controller driver and work
thank you all :D

HP Pavilion dv6 All 4 USB ports stopped working

Hello,
I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.
Could anyone offer a solution or suggestion, please?

Hello,
I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.

Webcam, USB Ports stopped working suddenly

Hi everyone,
Wondering if anyone can help me, my webcam and all USB ports have suddenly all stopped working. Yesterday my mouse light was flickering but still working and today the same mouse won't light up at all. I tried with a different mouse and it would light up
but is not recognized by the computer and unusable. I tried both mice on a different computer and they work just fine. I also tried a few more devices with my usb ports and realized they don't work at all.
I was browsing the net yesterday and I tried the following suggestions already to no success:
1. Turned computer off --> pulled out battery --> pulled out power chord --> Pushed power button for 30 sec --> put everything back and turned computer back on
2. Ran sfc /scannow and ran chkd
3. Tried system restore to the last date I remembered my mouse working
4. Went to Device Manager --> uninstalled everything under Universial Serial Bus Controllers --> restarted computer
5. Installed any critical updates for windows
6. Tried deleting/renaming the INFCACHE.1 file but even after creating a new permission group (Administrator) with full control it put an x on it and wouldn't let me
7. Ran Microsoft's automated troubleshooter
Really not sure what to do now....has anyone else been in a similar situation and can offer any suggestions? I am using an HP laptop (HP Pavilion g6 Notebook PC) running Windows 7.
Is something broken with my hardware or am I just suddenly missing some drivers?

Refer : http://social.technet.microsoft.com/Forums/windows/en-US/fa620005-3b71-4bff-acea-c4c4ce45adc9/usb-ports-have-suddenly-stopped-working?forum=w7itprohardware
And
http://social.technet.microsoft.com/Forums/windows/en-US/b906fcca-44a9-4f98-8faf-a82e75a38cda/all-usb-ports-suddenly-stop-working-in-windows-shortly-after-startup?forum=w7itprogeneral
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

One usb port stopped working today

One of my USB ports stopped working today. I think it may be related to Itunes update today. Has anyone else seen this recently? I restarted my computer - but that didn't help. I have a MacBook Pro - running Lion 10.7.5
Any suggestions? I saw one USB Hub when I went to Apple --> About this Mac, but couldn't tell if both were there.

http://www.ehow.com/how_7351075_reset-usb-ports-mac-laptops.html

My USB ports stopped working. So did my dvd drive. I have a Pavillion Laptop. Model 1245dx.

My USB ports stopped working. Do did my DVD drive. I did do a Windows update yesterday. Any ideas out there? I can't use my mouse or printer. Help!

Try a windows system restore, pick a date before the windows updates were installed.

Help, 10.6.8 update, all usb ports stop working after 10hrs

Similar Messages

Maybe you are looking for