Help 1394 setting gone after bios update v7.7 K7N2 Delta ILSR

hi, i recently updated the bios of my mobo I boot from a windows 98 boot disk copied the bios file to the ramdrive execute the update utility with the bios file restarted then after succesful flashing i've noticed that the 1394 setting in the bios is gone but system booted fine. how can i fix this please help what did i do wrong should reflashed it?

sorry, i've searched for similar problems in the forums bellybuster have same thing I did the solution now 1394 is back.
its good to have such talented people
MSI rocks
Thanks!

Similar Messages

LENOVO 3000 G230 DVD DRIVE Gone After BIOS Update

Hi,
After I updated my bios with latest one from the website http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_2191.html, my DVD drive is gone, not just from windows but i cannot find it in the BIOS.
Pls any one give me BIOS update, prior to this? any help in making my DVD drive show up again.
thank you,
ocavid
PS: Prior to updating the bios i can still work with the DVD drive but after I applied the update and the system rebooted, my DVD drive is gone.

I have successed to find again my CD/DVD drive both in BIOS and Windows 7 by doing the following:
(1). Press F2 at "Lenovo" start up display to enter BIOS
(2). Go to "Main" (the place showing also Harddisk Drive) and enter F9 for Set Default.
(3). Go to "Boot" and enter F9 for Set Default
(4). Exit with save.
Hope the information is usefull for all.

Help, can't overclock after bios update!

On the stock k9n2 750a bios version, my AMD 5400 OC’ed to a stable 3.08ghz without any hassle by simply setting the FSB to 220mhz . Recently, I flashed to the AMI 7374 v3.5 bios and couldn’t even post after bumping the FSB to 202mhz (it’s fine @200mhz). So, I reverted the bios back to AMI 7374 v3.1 and for some reason it now can’t post either after saving a FSB above 200mhz . As far as I can remember, I’m using the same settings as I used when I got the stable 220mhz FSB.
Anyone know what the bios update did to kill my overclocking or got some ideas/advice on how to get back to the stable 220mhz FSB? Thanks.

Quote from: JLio01 on 29-January-15, 13:54:12
What does ME version show under BIOS currently? When you check the ratio under OS, do you put your system under loading? And did you re-install driver from website after updating BIOS?
http://www.msi.com/support/mb/Z68AGD65_G3.html#support_download
ME version 8.1.2.1318. Even if I put the system at 100% load in Windows, the processor never moves past 3.4 GHz. I've checked this in multiple programs (CPUZ, RealTemp, TMonitor, etc.) And yes, I reinstalled the drivers that were listed under the BIOS update.
Quote from: TZBC on 29-January-15, 14:17:52
Go to OC section and change to advanced mode, change your CPU Ratio Mode from Dynamic to Fixed mode.
And go to windows checking the ratio have changed or not.
EDIT: sorry, I forgot this motherboard doesn't have this settings, try Disabled or Enable "Adjust CPU Ratio in OS"
I've tried changing that setting (Adjust CPU Ratio in OS) but it doesn't seem to have any effect.
However, I just noticed that I didn't have the newest version of CPUZ. I updated it and now it shows more detailed information for the multiplier: x34 (16-44)
So it is detecting that I have set it to 44 in Windows after all. But it seems to be indicating that it's using a dynamic CPU ratio of 16-44 - which I don't want, I want it fixed at 44 - but as you say, there's no option for dynamic/fixed on my motherboard. However, on the old v23.7 BIOS, if I set it to 44 it stayed at 44 always.
Even if it's using a dynamic ratio for some reason, it's not doing that right either because it's still never moving past 3.4 GHz (nor is it ever dropping below 3.4 GHz).

NEED HELP - K7N2 Delta ILSR

I really need help. I recently bought my new moboard the K7N2 Delta ILSR and with it a GeForce FX 5600 256DDR, 512 DDD Ram PC3200, an 80Gb Seagate SATA HD, andi have a 2800+ AMD Athlon Xp Barton Core Cpu. The problem i get is that when i try to install Windows XP it says it cant find any hard drives. I saw the other thread that was like this but that one had about RAID so i thought i would ask again. I even tried it with Windows 98 which finds my hard drive and even installed once but after that i tried to upgrade to Windows Xp which didnt work, overwrited some of my Windows 98 files and so that didnt work either and when i try to install it again it gives me errors. PLS help im desperate to get my lan workin with my other PC. I havent changed any options in the bios and i dont know if i have to change anything to make sata work. I dont have a floppy disk either for the hd. I found it in the array thigy as well.

Windows will not find a SATA drive you have to tell it you have one bios will only find IDE drives.
you must hit ctrl F when the screen comes up during boot and creat an array just follow the on screen promps.
If you bought a OEM board and don't have the SATA Promise disk download it from MSI and a Manual too.
Either a Raid 0 or Raid 1.
It looks like you have only one drive so just tell it that and the array will work.
Than go to your Bois and set Bois to boot from CD first SCSI secound.
Now you can load your OS. When your OS starts to load it will flash a line across bottom of screen asking if you have SCSI hit F6 do so. The OS will keep loading but when its done it will ask for you 3.5 promise disk. Put it in and load the Fast Track 376 program.
When you OS is finished loading it will again ask for this disk as the first time it just loads the drivers to memory the secound time to your HDD.
Good Luck it a little confussing the first time as the programers think there talking to techs not people so use terms that sometimes don't make sense.

Hi . plz help me. after bios update. i could work till I shutdown

After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

Hi.
Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
bios-20070709111839.zip
After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
Thanks in advance
MAT

> Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
You could try to access the BIOS and try to set the settings to default.
Dont forget to save the settings if you will exit the BIOS.
But if this procedure does not help, you will have to contact the ASP in your country.
Possibly the guys will try to flash the BIOS again with other special version.
Good luck
Greetings

I can't activate windows 8.1 pre-installed on my Toshiba E45-B4200 after BIOS Update

I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
Now I can`t update Windows, Office 2013, and so on.
I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
- Peter

Problem in booting after bios update

Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

see help 8....
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Satellite Pro L300: BSOD after BIOS update

Hi
after update the Bios of Satellite Pro L300, the windows not start!
Its show the blue dead screen!
What can i do?

Hi
Are you able to access the BIOS settings?
Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
But if the SATA drivers are not included the SATA mode should be set to compatible.
Please check this!
Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

After bios update my desktop runs so painfully slow it is unworkable. Disk drive seems to be constantly hammered by processes that don't appear on task manager. Running 64 bit windows 7 (sp1). Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support. Ideally would like to get previous version of bios as machine was running well before update.

I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
the BIODHD-8 error code means your harddrive is failing and must be replaced.
Back up everything that you possibly can before it fails and no longer boots up into Windows .
is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty)
HP notebook warranty status check website
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Satellite Pro C850 wont work after Bios update

my satellite pro c850 cd wont work after bios update from toshiba.
what do i do?

Saying: dont work you mean it does not power up or what do you mean exactly?
Did you flash the BIOS properly?
Possibly something went wrong during the update and this means that ROM module isnt flashed properly
In most cases a special BIOS crisis disk would be needed to get it working
Not quite sure if you can get it fixed by your own
Check this thread. Maybe it helps:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
Otherwise you need help from authorized service provider available in your country.

Satellite L650-1KR PSK1JE - dead after BIOS update

As the subject already states, my Satellite L650 - 1KR Part No. PSK1JE is totally OFF after BIOS-Update 2.40-WIN from bios-download-page.
I tried everything: Press all buttons, take out the laptop battery, only laptop battery, ...simply nothing!
My last hope is a hidden, very special key sequence for toshiba laptops or something like this.
Of course my warranty is already over... :-(
Please help!
Thank you in advance...
lichtimc

Sorry to hear you have such problem now. I presume something went wrong and now the BIOS chip is screwed up and in such situation you need professional help. Toshiba service provider can help you with this but Im afraid it can be very expensive.
In the past I never had such problems but on the net you can find many pages with description what can be done. Visit this page and check if you can find something useful there. I mean you can try to fix it alone.

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

After BIOS update DVD driver do not read DVDs anymore - Sat A80

Hi,
I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
Can I reinstall the old bios? Can I reinstall the firmware?
Thanks
Ronai Lisboa

Hi Ronai
Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
However, it's nice that you have solved the problem and that the drive works properly.
Thanks for the feedback.

After bios update, my window media player got hang and headphone clarity is not proper

HP Pavilion g6 after bios update, my window media player got hang and headphone clarity is not proper

Hello mathewstays,
Which model of g6 do you have? Which operating system? I'll be able to better assist when I know this information.
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Help 1394 setting gone after bios update v7.7 K7N2 Delta ILSR

Similar Messages

Maybe you are looking for