HELP!!!!! 2 questions on placing a file and printing

Hi,
I'm in serious need of help!! I've designed some wedding stationary for my sister in law. I did all the initial designs on Photoshop, however, the save the date cards require me to print on both sides. I was told that in order to do this successfully, I need to put the work in to indesign. Well, when I did this, the whole thing got screwed up. It went really grainy and pixelated. I managed to correct it the best I can, but the font looks a lot thinnner and lighter than it did in the original photoshop file. Does anyone know why this would be and in addition, know how to fix it?? I'm using Snell Roundhouse if that helps at all!
Secondly, the printing!! How do I set it up to be able to print on both sides? I've looked around but I think I'm being really blind as I cannot find out how anywhere!!
If someone can help me with this ASAP I would truly truly appreciate it!!
Thanks

4greensquirrels wrote:
I did all the initial designs on Photoshop, however, the save the date cards require me to print on both sides. I was told that in order to do this successfully, I need to put the work in to indesign.
Let's start by saying this is probably nonsense, but how you intend to print will make a difference. If you are doing the printing yourself, and you have a printer capable of two-sided printing (pretty unlikley on card stock) then ID can make a two page file that will duplex. If the printing machine can't print two-sided on the chosen paper, it really doesn't matter.
Now, on to more important matters. How did you move your work from Photshop to ID? And how was it saved in Photoshop? ID can import quite a few image formats from Photoshop, but if you have type or other vector content that you want to keep crisp, you need to save the file as a Photoshop PDF for placing in ID. Any other format will result in the Vector content being rasterized and going jaggy. Also, you must Place the art, NOT copy and paste from Photoshop (File > Place...) or all you will get is the screen preview.
If you've placed the art, and it still looks bad on screen, either you've scaled it up or it doesn't have sufficient resoltuion to begin with, or, very likely, you just haven't got your display settings correct. By default ID uses "Typical" display, which gives you a low resolution proxy for the placed art. For a better preview (but still a preview) go to View > Display  Performance and choose High Quality Display.
The broader question here is why all the work was done in Photoshop, and I presume that's because you are more familiar and comfortable working with that application. InDesign has a lot of advantages, though, for this sor of project, not the least of which is the ability to make a mulipage file. In ID you can place many pieces of external art and set the type, and maintain the quality of all the pieces. These days I rarely even build a photocollage in Photoshop, as I find it's much easier to control sizes and postions of the images (previously edited and masked individually in Photoshop, as required) in ID.
How about providing some details about how this is all going to be printed? With more info, we can offer better advice.

Similar Messages

  • My complaints and Questions MP4 M4V video files and other complaints

    My complaints and Questions MP4 M4V video files and other complaints
    I have been scratching my head as to how to fix my problem and I found some answers and some questions along the way. First of all, I have a video that should be correctly formatted for my iPod. Its specs are:
    Kind: MPEG-4 video file
    Size: 19.4 MB
    Bit Rate: 125 kbps
    Date Modified: 8/18/2009 2:15 PM
    Play Count: 1
    Last played: 8/21/2009 12:25 PM
    Profile: Low Complexity
    Channels: Stereo
    Total Bit Rate: 360 kbps
    Video Dimensions: 352x264
    Video Codec: H.264
    F:\File\AnotherFile\A3rdFile\TheMovieFileInQuestion.mp4
    Wow that was a chore. Apple! Let us drag copy and paste our info tabs information so we don’t have to type all this stuff when we are having trouble. **another problem and suggestion** right there.
    Ok, back to the problem of the forum.
    From what I can see from http://www.apple.com/ipodclassic/specs.html this file falls in line of everything required in order to be able to play on my iPod. It plays in iTunes fine but will NOT sync with my iPod. I get an annoying message that states, “Some of the Songs and videos in your iTunes library, including “BlaBlaBlaiPondFixYourJunkBlaBlaBla”, were not copied to the iPod “My iPod” because they cannot be played on this iPod.” Why oh why can iTunes play this video file but my iPod cant. Especially when the specs on Apple’s website say it can.
    So that was bugging me for a LONG time until I found my “Create iPod or iPhone version” option in the “Advanced” heading. Thank goodness this made my files playable on my iPod. Extremely LONG wait though. I know that other programs convert it in ½ the time. But times not to important as long as it gets done, (would be very convenient if it was faster though **Problem and suggestion**)
    Ok, now that I have used the “Create iPod or iPhone version” option it has slowly but surly converted my video. Ok, here is my main problem, the new file which is the result of the conversions information is as follows:
    Kind: MPEG-4 video file
    Size: 35.4 MB
    Bit Rate: 125 kbps
    Date Modified: 8/18/2009 2:15 PM
    Play Count: 1
    Last played: 8/21/2009 1:28 PM
    Profile: Low Complexity
    Channels: Stereo
    Total Bit Rate: 658 kbps
    Video Dimensions: 352x264
    Video Codec: H.264
    C:\File\WhyIsThisNewFileInMyMusicFolder\TheMovieFileInQuestion.m4v
    So basically it has made my file bigger *not a bonus in my book* greatly increased my Bit Rate *another interesting feature*, and I think the biggest change it has changed it from an .mp4 to an m4v.
    Why does it need to be an .m4v I could have sworn some of my videos were or are in mp4 which shouldn’t matter anyway because I was under the impression that iPods could play mp4 files. So that’s my biggest complaint and question. Why can my 80GB classic iPod not play my MP4 files and why am I forced to convert them??
    This conversion also creates 2 files in iTunes when I am done which is annoying because I have to go into my files info and look to see what file is the mp3 in order to remove it. Very annoying I can open my iPod options and see the files and some are faded (the ones it can not play) why can’t I remove them from that area.Suggestion Apple please make files that cannot be played on my iPod stand out some how for easier cleaning Suggestion. Thank you.
    Speaking of cleaning iPods, when I moved my entire library to an external drive I was faced with a terrible problem. “This file could not be found, would you like to locate file”, I was faced with this annoying message at least 600 times. Now I am glad that iTunes has a little “!” mark to show dead links so that you do some minor cleaning, Good Job iTunes No compliant there. However iTunes has no way of selecting all the broken files for major cleaning (like in my case). Going through and deleting over 600 files 1 by 1 is extremely time consuming and annoying. **Suggestion Apple please add more cleaning features for organizing iTunes**.
    Ok, speaking of organization now, another problem that appeared when converting my video files was that it put my new videos into the location where I have all my songs (my external hard drive) why can’t it put the new files in the locations of the original file? I have my computer highly organized and my original files were in that drive in that folder for a reason. If I could open my original file and skip the conversion, my iTunes would go to that specific folder to access the file which is fine. But now these new conversion files are elsewhere taking up space and disorganizing my computer. True I can go into the new location and move the files to where I want them (original location) but I don’t think I should have to hunt them down, copy, move, delete ect etc for all these files over and over. Very annoying, time consuming and should be unnecessary. **Suggestion Make file creation and location more customizable, and user friendly, your customers will love you for it**.
    Well since I have gotten into Apples iTunes and iPod problems that I have had to face I might as well bring up one or two more problems and suggestions. About a month after purchasing my iPod a sibling bought one as well. His however is way more convenient then mine. I suppose he has a 5th gen. so here is my question: why does he have a search option and I don’t!!!! Why does he get more features every so often and I don’t?! Why can’t Apple write some software for us classic guys which got the iPods going! It’s very annoying when I have to spend more time looking for the song then I spend actually listening to it, when he can pull his up in like 3-6 seconds? I highly doubt the hardware between our iPods is that dissimilar and even if they are why cant software be written for us. **Suggestion treat all your customers good not just the newer ones, and make some more features for the classics like me and my iPod.” We will be grateful for it I promise.
    Ok, I am almost done. Let me just recap my questions, I know my post is kind of lengthy.
    #1. Why can’t my iPod play MP3 video files? And why do I have to convert to almost all the same settings except changing it from an mp4 to an m4v. according to Apples own site I should be able to play .m4v .mp4 and .mov files!! Note: remember iTunes plays them fine but my iPod will not.
    #2. Would be much more convenient to be able to copy the information from the windows in iTunes so that problems and trouble shooting would be much easier. A little check on off options in iTunes advanced settings would be terrific.
    #3. Why is the conversion so slow? Please speed it, you have the power. Convenience is the thing that sells products.
    #4. Files that cannot be played on the current iPod need to be easier recognized for simpler cleaning.
    #5. Also make an easier way to select all dead link files for faster cleaning, deleting, etc. This one is important.
    #6. Make a user friendly way to change where my files are going to end up once I convert them for iPod more options and better customizable settings are need.
    #7. One of the most important is ADD A SEARCH OPTION. I and we classics will LOVE Apple for it.
    For you readers, I apologize for the long post, and any grammatical errors you might find throughout it. These are problems that I have faced with these programs and hardware and I wanted to make sure they got acknowledged and hopefully addressed. Any information about why I cannot play MP4 Video files on my iPod would be the best. If anything in my post gets answered that’s the one I want most. Will save me a lot of hassle.
    Thank you all and I look forward to your suggestions and comments. All are welcome and appreciated.
    Sincerely,
    Bond, James

    Was playing with iTunes and thought of another suggestion! Let us play files in iTunes from an iPod! A friend or sibling should be able to plug his iPod into my computer open iTunes and play any of the files there. Many times I have wanted to show a movie clip or video to a friend, and I have the dock so I can do it on my T.V. but play it on their computer in their iTunes forget it. That would be a very nice feature as well so we can watch our movies at maximum size or listen to music on a better sound system, just another suggestion that would be nice. Thanks

  • Need help to set up file and print sharing

    i just bought my router and i needed help setting up file and print sharing i am using windows xp on both of the computers one is a desktop and the other one is a laptop

    Here
    Enabling File and Printer Sharing
    "Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

  • File and printer sharing using Airport Express, usb HP Deskjet 3620 printer

    I have a general question, and other forum users might have a good resolution for it - but if not, here's what i'm dealing with..
    I have an Airport Express that I bought a couple of years back, it has all the necessary firmware upgrades, i'm running 2 Windows XP boxes going through a combination of Ethernet on 1 directly to the 2 Wire Home Portal 2701HG-B, and I also have an additional Netgear WGR614 v7. All firmware upgrades on all devices is installed and functioning after reset.. I've tried using a combination of the Windows XP built-in networking software, Apple Airport Utility, as well as Bonjour to get things configured and working right over the network. I've also installed the AT&T software, one is running the Mcafee security suite, and mine (the Etnernet box) is running the diagnostic utility.
    I've tried defaulting all the firewall settings in either/or/all routers i've tried setting the Airport up with, and there still seems to be problems getting file and printer sharing to work right on all computers, and still remain safe behind the firewall. All the network hardware is set up with wpa2/psk authentication, and appears to be configured correctly.
    The only version of the Apple Airport Utility that will run successfully on the systems, is the original version that came on the CD with the Airport. Both systems are completely up-to-date from Windows update, and are both running XP service pack 3.
    I know for a fact, that the Airport is working just fine, as I've troubleshot all possible known hardware issues with it individually, hooked up to 1 pc (with current updates installed and running). Wireless works fine, i'm actually running the Airport utility on my main system in the living room, that's hooked up hardwired to the router. Both systems get online and surf without a problem going through either/or router as well. I've also tried dissabling the Windows firewall on both systems, and trying to set up file and printer sharing manually using the wizard, and that don't seem to resolve the issues either. However, both systems (wheather hooked up networked, OR individually), have both been experiencing some odd "quirks". The Ethernet box i'm on, has overwritten my primary HD, as "Athena" and made it unusable. The wireless box, has been giving simular "boot-up" related errors as well. I've checked the Cmos/DOS settings on both, and performed the suggested "boot-up" priority related tasks, and both systems are still experiencing problems. The Mcafee suite is up-to-date, and has caught several potentially dangrous programs running on the wireless box, hooked up to the Airport Express, INCLUDING the bundled HP diagnostic software.. However file and printer sharing still remains elusive...
    Are there any suggestions about settings to check on the devices, or in the computers, to make sure it's all configured correctly?

    ...Also file/printer sharing just flat out over the network is NOT a problem, as it's been configured before over ethernet through my Netgear router and file/printer sharing worked just fine.
    The main problem seems to be in the Airport Express' settings, it will "get configured" and then lock me out of the utility to where I can't get back in..
    The main Airport password has not been changed, and the wireless network encryption is the same for all wireless devices running on the network.
    The main problem, just seems to be with the Airport.
    Even the Home Portal has detected the Netgear router (unless it having my Netgear router saved in it's settings might be causing a conflict)... Suggestions?
    I've contacted AT&T Home Networking for help already about the Home Portal, unfortunately they can not help me with other network related issues, since i'm not using the 2 wire wireless adapters offered by AT&T...
    Message was edited by: okwolffcub

  • File and print sharing keep turning off

    I have a thinkpad SL510 with Win Pro installed and for some reason the File and Print sharing checkbox for the Ethernet adapter keeps turning off after I reboot or restart the computer...What do you have to do to prevent this from happening?
    Solved!
    Go to Solution.

    downsct, welcome to the forum,
    are you using Access Connections by any chance?
    There is a setting in Access Connections which can influence file and printer sharing. If you look at the profile's further settings, there is an entry for network security, file and printer sharing needs to be activated.
    I think this is a great feature of AC as it will override the windows settings, you can choose to allow or block in each profile; e.g. allowed at home, but blocked at the Airport or Hotel.
    Hope this helps
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • File and Printer Sharing Problem with WRT54G

    I am currently having problems sharing files over my network. My setup consists of:
    3 laptops (wireless)
    1 desktop (wired)
    WRT54G V6.0 router with firmware version 1.00.9.
    All of the computers have File and Printer Sharing enabled, unique names, and are on the same workgroup. However none of the computers can see one another. When I try to view workgroup computers for my network places, the explorer window stops responding for about 30 sec. and then spits out a dialog with the error:
    "Workgroup is not accessable. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
    The list of servers for this workgroup is not currently available."
    I think that this problem has something to do with the router, as I have been successfuly sharing files and a printer with these settings using a microsoft 802.11b router for over a year. After purchasing the linksys and swapping it out with my old router, filesharing no longer functions.
    I have spent a little time browsing the forums and have seen other posts from people with simmiler problems, but was unable to find any solutions.
    Any help would be much appreciated.
    Thanks.

    I'm having the same problems as you are, I have 2 computers on wired the other wireless the router is in between and I can't access from either side, although I can ping and remote connect but just cannot share files across the network. I have looked all over the forums too and there saying to ditch linksys and do something else.
    Its not you thats caused this it is the firmware and the router that have the problems.
    My Specs:
    WRT-54G
    v5.0
    That new firmware update 1.00.9 just isn't working right. I might downgrade my fireware to fix this problem.
    Message Edited by justin2006 on 09-26-200612:24 PM

  • E3000 file and printer sharing issues

    Yes, there is at least one other thread on this but it looked a bit stale.
    Last Friday I replaced my BEFSR41 router and WRT54G wireless access point (which had gone brick on me) with an E3000.The E3000 is configured as a DHCP server at 192.168.168.65 with a scope of 66-115. The only other non-default setting is that I opened up the custom port for my slingbox.
    Prior to making the switch, I had several network shares on an XP desktop that I used frequently from my Vista laptop. Now, however, I can no longer even "see" any other computer from any of the computers on the network, much less access their shared folders. In other words, if I view the network from any of these machines, the only machine that shows up is the machine itself. Everything else (internet access, slingbox, a print server) is working just fine.
    One of the suggestions in the other thread was to turn off Norton Internet Security, which is of course not a viable option. However I did check the settings, relaxed the network default to "Shared", and raised the XP desktop to "Full Trust". This had no effect.
    I pinged the various computers, and was able to do so by their IP addresses, but not by their computer names (that worked with the old router). On a hunch, I tried creating a mapped drive, and that also worked when I used the IP address, but not when I used the computer name.
    So - there's nothing wrong with the network configuration, or with how the shares are set up, and Norton isn't the problem. The only problem seems to be that names aren't being resolved, which could be affecting windows discovery, too. Did the BEFSR41 provide some local DNS functionality by default, and the E3000 doesn't? Is there an option I need to enable? If so, I can't find it. Perhaps I should explicitly add the E3000's internal IP address as a third nameserver??
    A note on the "support" I tried to get before I turned to the forums: The "Chat agent" asked a bunch of questions, misunderstood my configuration and my problem, and once he finally did understand said "we don't support file and printer sharing". It took me several more questions to learn that he really meant that the Chat facility isn't the place for these questions - I had to call the 800 number. I did that, and after several minutes on hold, reached an agent. After going through everything again, and with the rep going on hold several times to "speak to his supervisor", he said it was "beyond his competence". I was eventually told I had to call another FEE-BASED service. I told him that was unacceptable.

    Ok, another update and possibly some clues.
    I was curious why at one point, when all the computers were in Workgroup2, that "Workgroup" still showed up in Explorer under the list of networks, but only on the two XP machines. Netscan showed this group association as well, which I then realized was the E3000 itself, in its role as a [I]potential[/I] NAS server. However there was no storage device attached.
    Could this in itself cause the access error? If so, should users be advised that if they don't plan to host any storage, that they should to go to the E3000 Storage Administration page and change the workgroup name to something other than their actual workgroup name?
    In my case, I changed it to "Workgroupx", though perphaps something like "StorageGroup" would be more meaningful, especially if the Workgroup computers could still access any storage I might install in the future.
    Anyway, I repeated my original approach (after the above change and a router reboot), and at least got my original Workgroup reestablished to the point where the XP machines not longer get access errors, and most machines can access the shares on the XP desktop. The steps I used on each machine were:
    remove any shares I had set up on any folders
    uninstalled the File and Printer Sharing service
    Accessed Computer Name properties page to change the workgroup name
    Shut Down
    After all 4 were done, I reversed the process:
    Started computer (now coming up in new Workgroup)
    Reinstalled File and Printer Sharing service
    Checked visibility
    At this point, the XP machines could see each other, and the Win7 and Vista machines could see each other, but initially these two cliques wouldn't interact.
    Next I re-added the shared folders on the XP desktop, and the XP netbook could see and access them. After about an hour, the Win7 machine joined this clique, and could also access the shares. But six hours later, the Vista machine is still clueless. Netscan shows everything of course, and I used it to set up a mapped drive on the Vista machine to one of the shared folders.
    Other possibly relevant facts:
    The was all working fine with the BEFRS41/WAP54G combo
    I can ping all machines by IP address, but not by name
    On the Vista machine I can set up mapped drives to the XP's shared folders, but again, only by IP address.
    At one point I removed NWLink from the XP desktop. Now, nbtstat -r only shows the printserver's name being resolved.
    The two XP machines, being SP3, lack the LLTD responder.
    So,
    Is it possible the NetBIOS in NWLink was providing some kind of name caching? If so, should I reinstall the protocol driver (I don't think it is available on Win7)?
    Should I request and apply the KB922120 hotfix to get LLTD onto the XP machines?
    Perhaps in the morning, "by name" access will have returned, as it did on my first go-round. Needless to say this has been a real pain, what with all the reboots required. At least now I remember to hit F8 so I can select Safe Mode with Networking...

  • Event id related to the removal of the file and print sharing for networks

    Hi ,
    Recently print team has migrated the print server from the physical old server A to the VM server A-new .After the migration ,  the server A-new is retained with the name server A shutting down the old server .
    But the clients are reporting that they are not be able to print because we found that due to this print team migrated the old print server to the new print server with the duplicated entries which reflected in AD. This our server team came to know once
    the complaint raised  by the site person to us saying that their printers are not working at all.
    While checking the issue only then we found that the duplicated entries are found in the AD for the printer objects published in the AD.Print team has done the improper migration and left to server team saying that it is our responsibility to solve the issues.
    And I suspect that somebody has  removed the file and print for networks in the network portion of the windows.We came to know only when we try to take any share either file share or print from the particular server to file server.
    After enabling that option in the network portion , everything got resolved as the duplicate entries removed from the AD and published one instance of the printers.
    I need to find the event in which this action has been triggered to remove that component and from that to identify who has done that..
    Any help is greatly appreciated
    Thanks & Regards S.Swaminathan Live & let others live!!!

    There are some print events on the Domain Controller if one of the DC "pruned" the old print objects.  Unfortunately these are information events logged to Print-Service Operational channel which is not enabled by default.  You might
    be lucky and someone had these events enabled. 
    Check if the channel is enabled on all your domain controllers. 
    http://social.technet.microsoft.com/wiki/contents/articles/13308.troubleshooting-windows-server-2012-printing.aspx
    Alan Morris formerly with Windows Printing Team

  • Script to install and enable file and printer sharing windows 7

    Hello
    I posted this question on the Microsoft Partner Windows 7 forum and the support person told me that I should post it here.
    I have a Customer that was running Novell.  We will migrate them to Active Directory.
    The question I have is.  they did remove the file and printer sharing service on their Windows 7 workstations.
    Is is possible to have a command line or a script to install and enable the file and printer sharing for Microsoft Network?
    We need this enable in order to install the SCCM client remotely
    Greetings
    Gaetan Labrecque

    How are you going to connect to the workstations?
    File and print sharing are not needed for Group Policy to work.  GP can be used to re-enable file and Print Sharing.
    You will also  need to start by joining the machines to the domain.  That will be very difficult unless all have PowerShell and are configured for WinRM.
    This can be somewhat accomplished by using VBScript remotely but will require a very sophisticated admin to set up and debug in your environment.  I recommend hiring a consultant who has experience in conversions or is a master VBScripter in a domain.
    There is no easy answer.  It is not about File Sharing.
    Here is how to add roles and features with PowerShell:
    http://technet.microsoft.com/en-us/library/hh831809.aspx
    ¯\_(ツ)_/¯

  • File and Printer Sharing

    Running XpHomeSp2. Just purchased a WRT150N to replace a failing SMC wireless router. Was able to share files and printers before replacement, now cannot. Microsoft Windows Network recognizes Local network by name after long, slow delay, but does not list any computers or shared locations or devices there when access attempted from main computer, but, oddly, list is possible from another network computer, but only the shares it offers to the network are accessible.
    Only difference between now and prior is the router and that WPA security is invoked. Access is not granted when security is disabled. Have found no support for this issue anywhere. Also now note that Xp no longer lists Simple File Sharing in Folder Options, not that I'd used it in original sharing setup.
    Anyone experiencing similar issues able to offer resolution?

    Your computer software firewall may be blocking the file and printer sharing. It was for me. You changed from a 'Trusted' network physical address to a new network physical address. Go into your software firewall 'Trust' settings and change the new address to 'Trusted'.
    I had previously just disabled the firewall. Apparently that's not totally effective.
    Hope this helps.

  • File and Printer sharing on Windows 7 Through Group Policy

    Hi,
    I was wondering how to enable File and Printer sharing on Windows 7 Through Group Policy. I have enabled the policy called: Allow inbound file and printer sharing exception.
    But when I go to advanced sharing settings, it's still turned off.
    Windows Server 2003 AD Domain, and I'm using the Group Policy Manager from my Windows 7 machine to edit the policy.
    Any ideas?

    Hi,
    Based on my knowledge, there is no Group Policy setting for enabling and disabling File and Printer sharing. To do this, you may need to write a script and you can go to our Scripting Forum for help.
    In addition, I would like to share the following with you:
    Enable or Disable File Sharing for a User or Group by Using Group Policy
    Network and Sharing Center Group Policy Settings
    Hope this helps. Thanks.
    Nicholas Li - MSFT

  • Script to disable Client for Microsoft Networks and File and Print Sharing for Microsoft Networks

    Hi, I am trying to find a way of using a batch file or vbscript to disable Client for Microsoft Networks and File and Print Sharing for Microsoft Networks on a Network Interface Controller.
    I've done some searching on the internet and I can see some suggestions to locate the Setting ID of the NIC and then remove the value from the "Bind" string under "HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Linkage" and "HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Linkage"
    I tried this but it didn't seem to uncheck itself from the NIC properties under NCPA.cpl
    Can someone help me? 

    http://social.msdn.microsoft.com/Forums/vstudio/en-US/b0407073-07bc-462b-9de9-7295be5fa183/disable-file-and-printer-sharing-for-mircorosoft-networks?forum=csharpgeneral
    ¯\_(ツ)_/¯

  • How to uncheck File and Printer Sharing for Microsoft Networks by Command!!

    Dear everybody,
    I meet a problem with my System now, and I need your help!!!
    As mentioned in title, I need uncheck on File and Printer Sharing for Microsoft Networks by Command for Security purpose.
    Could you show me the way to do it by command line
    I think GPO can solve this but My Boss want to do it by command line
    Thanks for your help!!!

    netsh advfirewall firewall set rule group="Network Discovery" new enable=Yes
    netsh advfirewall firewall set rule group="File and Printer Sharing" new enable=Yes
    To disable these functions in Windows, use the same command and replace 'Yes' to 'No' in the above commands.

  • File and print sharing on windows server 2008

    Hi, Now that microsoft have removed the apple compatability oprtion from server 2008 onwards. Does anyone know how to interate Macs onto them?
    Primarily this is for sharing files and printing services, but also vpn access etc.
    We are new to mac computing and are starting to change over our infrastructure but at the firat attempt we hit this problem. Apple support just say 'we dont support that'
    Not good service, so I thought the community would know?
    Please help!
    New Macbook pro running Mountain lion - Windows 2008 SBS.

    Hi, Now that microsoft have removed the apple compatability oprtion from server 2008 onwards. Does anyone know how to interate Macs onto them?
    Primarily this is for sharing files and printing services, but also vpn access etc.
    We are new to mac computing and are starting to change over our infrastructure but at the firat attempt we hit this problem. Apple support just say 'we dont support that'
    Not good service, so I thought the community would know?
    Please help!
    New Macbook pro running Mountain lion - Windows 2008 SBS.

  • File and print sharing resource is online but isn't responding to connection attempts

    hi,
    I'm on windows 8.1 enterprise.  All of a sudden in windows explorter when I try to access drives on my network I get "file and print sharing resource is online but isn't responding to connection attempts"..  This formerly did not have
    any issues.
    I did a restore to a point where I know it did work...but it still does not connect to network drives.
    Please advise,thanks James
    AJ Anning

    Hi,
    I made a search in Cisco support forum and found some thread which had similar problem with yours, the solution of them maybe helpful with your.
    https://supportforums.cisco.com/discussion/11533701/cisco-anyconnect-3008057-certificate-validation-failure
    You can follow the reply of this thread to check Cisco certificate on your system.
    Open Certificate manager: Open Run, Type
    certmgr.msc , Press Enter.
    Roger Lu
    TechNet Community Support

Maybe you are looking for

  • How do i connect my macbook into a tv

    I have the connecting cables to connect my macbook into the tv, but the only this that appears on the tv is the sign in screen.

  • Site does not load after some minutes of creation or after restart the server

    Hello, I have been asked to create a test enviroment identical to the production enviroment. So, what I did was: Backed up the production web application's content database: Prod_WSS_ContentDB Created new test servers (domain controller, sql server a

  • Item category determination for Free Goods

    Hi I have configured inclusive Free Goods and have a second line correctly determined when I create a quotation or a sales order for a particular product. However, I keep getting the error "Item 20: No item category could be determined". I have creat

  • Doubt in Integration Scenario Configurator- Not able to assing sender chane

    Hi All, i have imported the integration scenario to the Directory. Assigned the relevant business services to both Sender and Receiver. I am able to assign a Receiver Communication Channel. But for sender system communication system , it shows 'Not R

  • User32.dll Causing Error on Application Exit

    I have an application built into an exe with LabVIEW 8.2. It uses 1 simple call to user32.dll to determine if caps lock is on. When I build the application, it copies user32.dll to the 'data' subdirectory of my application. Everything works fine, how