Help 5800 bluetooth problem with tomtom & vauxhall...

my 5800 wont auto connect to my tom tom i have to connect manually any ideas ????
also i cant down load my phone book or see any call list in my car ( 2008 vauxhall zafira (uhp) factory fitted hands free ) please help

did you authorize your tomtom in the bluetooth settings for automatic connection?
My dad also drives the zafira with the hands free and i can tell you phonebook downloading is only supported via cable-connection (cradle).
But my carkit installer says its a normal thing with opel/vauxhall handsfree

Similar Messages

Hello plz i need yours help i have problem with my i cloud back up when i restore old back up t

hello >> plz i need yours help i have problem with my i cloud back up when i restore old back up my problem exact with contact cause it disappears from contact list

iPhone: Transferring information from your current iPhone to a new iPhone

Help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

How to fix the Bluetooth problems with the Treo

It’s pretty obvious by now that Palm had not intentions of addressing the Bluetooth problems with the Treo smart phones. As for me, I need to reset my Treo 700wx several times a day to keep the bluetooth connection working. At my house it simply does not work because I live in a rural area where my cell signal drops out continuously, only for a moment but that’s all it takes for the Treo loose the Bluetooth connection.
I’ve searched here on this board for a solution only to find out that I’m not the only one with this problem. I’ve searched the Internet and could not believe the endless complaints about this problem, not a single fix was to be found. I will be going to every single site I can find on the Internet where I can leave a review of this product and I would encourage others with the same problem to do the same.
Post relates to: Treo 700wx (Verizon)
Post relates to: Treo 700wx (Verizon)

The "Mobile Device" you see only shows what is on your Treo when ActiveSync is running and connected. When it's not connected, there is "nothing". This is good when you want to copy a file you have saved in RAM (main memory). Connect your Treo and have Activesync run (successfully, of course). Then, you will see all the accessible files on your Treo.
Please read the previous reply (I have added and edited it to respond to some of your questions). Also, since I have the Card Export 3.14 for the WM5 and 6 running and it works on my Treo 750, I believe it should also work for you. I have WM 6. Earlier versions of Card Export actually "broke" Activesync for me. It wasn't until very recently that I wanted to try it again, in hopes that they have fixed the bugs. Apparently they have and I now use it to "fix" Activesync when it doesn't want to connect.
So, the latest version is 3.14 and it supports WM 5 and 6 (although they incorrectly named it Windows Mobile 2005/2006).
Post relates to: Treo 650 (Rogers)

Bluetooth connection problems with TomTom Go910

Although my TomTom Go910 finds my 5800 it keeps saying that there is no answer from phone 'look at your phone'. Anyone got any ideas what's wrong as my previous Nokia had no such problems?

I have the same problem with both our TomTom 500 and 530. Really annoying as our olf Nokia 6300 worked with both including SMS. The 5800 often has to be 're-booted' to connect and then most of the time does not work.

Nokia express 5800 bluetooth problem

hi all
my problem with my nokia 5800 express music is when i try to open the bluetooth it gives me a error message which says unable to preform blutooth operation and before it was already working , and i already upgraded the new version as try that it may work but still also the same and after the new software update i already made a hard reset and still the same problem so any idea what that could be ????

musiker wrote:
Hey, I have the same problem including that FM radio does not work. ANYONE WHO KNOWS?
THANX
If you have also tried the Firmware update / re-install and the Reset mentioned by
senior2007 without success, most probably its a Hardware failure that need s to be addressed by Nokia care ...

1.1.3 Update & Bluetooth Problems with Nuvi 680

I have been using my iPhone with a Garmin nuvi 680. The nuvi 680 has Bluetooth and can be used as a hands free speaker/mike. I had been using it happily until I upgraded to the 1.1.3 update last night. Now even tough I get an initial connection, it is dropped within a minute or so. Apparently, the connection is reestablished at some point, because after a few minutes the dialog screen warning comes up again telling me that the phone was dropped. This goes on ad infinitum until I unpair the iPhone or turn off Bluetooth. I have tried unpairing and pairing again with the nuvi. It didn't have any effect. I am going to reset the iPhone and try again, but I am not sure that will help.
The most irritating thing about this problem is that the dialog that keeps coming up, has to be dismissed manually before you go back to navigation. After dismissing the dialog 5 or 6 times, I just turn off Bluetooth in frustration.
Has anyone else experienced similar problems? How did you fix the issue?

I am experiencing the same thing. Very frustrating. I got rid of my Motorola Q about 1 week ago and the bluetooth with that phone did the same disconnect cycle (except it also crashed the phone a lot). I have been in heaven with my new iPhone especially with the bluetooth working with my Nuvi 680....for about a week. Now with 1.1.3 I'm back to angry. I would actually seriously consider going back to 1.1.2. I need bluetooth to work with my GPS more than I need homescreen icons or maps triangulation (that's what my gps is for). I'm new to Apple cycle with this type of issue, but I hope that I'm pleasantly surprised to find a quickly rolled out fix.

IPhone 4, iOS 4.2.1 & Bluetooth/Charging with TomTom Car Kit

All
FYI
I have had a 6 mth running battle with TomTom after numerous emails, calls, new replacement car kits and troubleshooting. I basically could not get my iPhone 4 to connect to Bluetooth of TomTom CarKit (find it in Bluetooth search), nor would the Carkit charge the phone. (there were other unrelated app issues too).
Turns out i am behind on this, as if you did not know already TomTom have told me over the phone (by v senior management team member) that the Carkit is not working with a "selection" of TomTom Carkit/iPhone users, due to a bug in the latest 4.2 and/or 4.2.1 iOS. It means the Carkit (£100 + £50 app!) bluetooth and charging feature (the main bits!) will not work with any devices on this iOS.
He says not all people have issue but TomTom working with Apple on it and no date set for updates to fix issue by them or Apple. It means you may as well not try to chase them or Apple as wont change a thing and put your car kit in the loft as it aint going to be fixed any time soon.
I did have my old bluetooth headset working fine, until i disconnect pairing and tried to re connect. It no longer will reconnect.
Any one else had this, got a fix or an update on the issue?
thanks

I found out today that when you turn off the GPS Enhancer (in TomTom go to Settings/Advanced/GPS Enhancer) the phone does not get so hot anymore and it actually charges in the car.
So from my short test, the GPS Enhancer seems to be the culprit.
Hope this helps.

Bluetooth Problems With iPhone 6

With the latest iOS on iPhone 6 is there still problems with Bluetooth connectivity? I have a FitBit, a Plantronics Marque 2, and a Casio STB-1000 watch that will not stay constantly connected. Since the later two were new, I was blaming them until I started having problems with the Fitbit which I never had problems on my iPhone 5 and seeing others having problems. Come on Apple, with all the people having problems we need a fix.

Hi stevenfrommarion,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like there is trouble with bluetooth connectivity. I would recommend that you read this article, it may be able to help the issue.
iOS: Troubleshooting Bluetooth connections - Apple Support
Cheers,
Mario

Bluetooth problems with iphone 5 running IOS 8.1

I have a problem with my iPhone.
Every time im truing to connect to my mac air (MacBook Air (13", medio 2013) its will connect to my 3G network and it will not let me use the feautures of OS X Yosemite, and when i turn of 3G there comes a pop-up message saying "Could not connect to device"
Please help me
Thanks in advanced

Hi ashnupluto,
If you are having an issue with not being able to establish a Bluetooth connection between your iPhone and your MacBook Air, I would suggest that you troubleshoot using the steps in this article -
iOS: Troubleshooting Bluetooth connections
Thanks for using Apple Support Communities.
Best,
Brett L

Bluetooth problems with Xperia C4 - Android Wear - Motorola 360

Hello, I have a serious problem with my new Sony Xperia C4 Dual phone
I'm always losing the connection with my Motorola 360 smartwatch.The first time I start everything, I can pair my phone with my watch.
Everything is working fine (watchfaces, apps, notifications, etc).
But randomly (can be 1 hour or can be 1 day, when the phone is too far from the watch, after a phone restart, or ...) the Bluetooth connection is lost and will never come back.
If I could restart the connection that would not be that serious but... I can't!
Android Wear will then start hanging on "Connecting" state and it will not reconnnect until I completely restart the pairing process. The only way is to reconnect is :
1. Delete the watch in Motorola Connect
2. Delete the watch in Android Wear
3. Hard reset the watch (otherwise it's impossible to start the pairing process)
4. Turn off and turn on bluetooth on Xperia C4
5. Disconnect all other Bluetooth devices (like car audio and BSP10 Speaker)
6. Restart the pairing process
The whole process is taking about 15 minutes and 30% of the watch battery. (because every apps needs to be reinstalled) What I did so far and did not fix the random disconnection problem :
-Hard resetted 2 times the phone
-Hard resetted 4 times the watch (2x on 5.0 and 2x on 5.1 Android Wear)
-Restarted many times the phone
-Restarted many times the watch
-Tried with the "Sony Smart Connect App" disabled on the phone
-Tried without any extra app on the watch (uninstalled trackID or Sony Music, for example)
-Updated all the apps on the phone
-Tried with a "Blank" phone and "Blank" watch (did not install ANY application) What I can say :
-The problem occurs even in Android 5.0.2 or 5.1.1 on the watch (Motorola has just rolled out the 5.1.1 OTA)
-The problem occurs with different Moto 360 Watches (tried with the watch of a friend, same problems)
-The problem occurs only on the Xperia C4 (Dual) phone. (works great on a Zopo ZP999, Wiko Highway and Galaxy S3)
-Even after resetting, it is sometimes difficult to find the watch in the Bluetooth list, while every other phone can see the watch perfectly!
-Bluetooth hardware is working perfectly, because I can connect to my car, with my BSP10 speaker and another Bose SLIII Speaker. Additional information for the watch :Motorola 360 Watch Build LDZ220Android Wear 1.1.1.2006643Google Play Services 7.5.76 (2002306-534)Android Platform 5.1.1 Additional information for the phone :Android 5.0Model E5333 (Xperia C4 Dual)Build 27.1.B.1.81Smart Connect 5.7.18.401 (11 june 2015) What I think :
There is something that is preventing the watch from being connected properly in the Sony extra Apps.
I think the Smart Connect and Throw (and maybe other) extra apps are bringing a lot of trouble to the Bluetooth connection with the watch. Since 2 days, Motorola has just rolled out the 5.1.1 update of the Moto 360 watch, the update is now enabling WiFi.
I connected my watch to the wifi and the "Cloud sync" connection is working perfectly in Android Wear.
When there is no Wifi network, the phone/watch are trying to connect back with Bluetooth... and the problems can begin. Other problem : when the watch is connected to the phone, immediatly after making NFC contact with my Sony BSP10 speaker (to pair them), the connection is lost between the phone and the watch. So if I use my speaker i will have to hard reset my watch. In fact... every morning I take my watch and I need to start that f*c*in pairing process because of the software bug on the phone.Can somebody help here?
Is there any update planned? Thanks in advance, Guich

Hello Quester : Like I said, I tried with two different watches ( 2x moto 360) and the problem is still present.
So you can exclude there is something wrong with the watch.
I tried with 5.0.2 and 5.1.1 on the watch and it has no effect. My bluetooth hardware is working fine one the phone, too. (other devices are working, like speakers, car, laptop).So clearly, there is a SOFTWARE issue that drops the pairing and makes Android Wear losing the connection and never coming back. Yesterday everything was working fine until I used the BSP10 speaker, connection with the watch was lost.
I'm absolutely sure the problem is bound to Sony Smart Connect/Throw/whatever because on other phones it works perfectly!

Nokia 5800 Restart Problem with the Memory Card

hi,
i am facing a peculiar problem with my 5800.i hv firmware v21.
Whenever i restart the phone with the sd card inserted (it has around 35+apps/games loaded but 4.3GB of memory is free) ;the phone hangs up at the "nokia" screen & i hv to remove the battery.on ejecting the card & then restarting; the phone starts up fine.on inserting the card later after the restart; it is read without any problems by the phone & all the apps. work fine.i do not hv any apps loaded for start up.
i saw similar problems posted in some other topics for 5800;but could not get a clear idea whether this problem was occuring in other phones as well.Is it firmware related or due to large no. of apps on the phone?
please help.

it is most likely the corrupt memory card issue, it happens quiet often. that is why back up is so essential to have especially of memories and such. for that i use share online and upload my pics right away to ovi or vox whichever.
the programs you bought you should be just able to download once again and plug in the key you have gotten with your applicatioins. you should be able to recover all of your purchases. i am sorry for your pics for those can't be recovered
i always keep a separate email folder for all my application keys so i can find they easily as phones and memory does get corrupt. i can do it relatively quickly and have the info handy even on the go
Message Edited by radical24 on 22-Jul-2009 01:03 PM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Can anyone help; re: Faxing problems with my 6200 all in one

Our HP office jet 6210 which we use only for faxing and minor printing intermittenly goes crazy with blinking red and amber lights
when a fax is being received or when we are sending one. When the fax fails and we stop the blinking lights, it self tests then turns off. Sometimes when it does this we get an error message printed that says "Power Failure." The party being faxed gets 1/2 a fax or 1 page out of 5. I'll unplug it from the electric and plug it back in and then it will work fine for a day or two. We have tried faxing from the glass when we have problems and that seems to work when self-feed faing doesn't. We have not installed any drivers as this is not plugged into a computer but stands alone with it's own designated phone line.
Any ideas??? The machine is 5 years old and has never given us any trouble until now. Is it time to upgrade?
Thanks so very much!!!!
Joanne

I have a new photosmart plus printer B209a CD035A and I have never been able to set up the fax, I get a message saying that the phone line is not connected to the modem, the phone is connected to my modem or I would not have an internet connection, perhaps I am not understanding it, I have the printer set up wireless now but it was wired before and I still could not set it up, I purchased it in April this year along with my new desktop Elite HPE-150f model AY603AA, using windows7 64 bit, now I have a problem with the alignment, all the fonts are cut off down each side which makes it hard to read instructions, can someone give me some help with this. The alignment problem has only just started this past 2 weeks. thanks

9860 Bluetooth problems with car hands-free

I have a Torch 9860 that has problems with my new 2012 Hyundai Santa Fe. I can pair it with the bluetooth in the car, and it will sometimes keep the connection on the next trip, but usually I get a 'connection failed' message.
If I revert to the previous OS version, the problem goes away. I had to have the phone replaced recently, though, and the problem is back. It works great with a Jabra earpiece, but not with the car. I could do the same downgrade, but I would prefer not to.
Any ideas, please?
Thanks!
Solved!
Go to Solution.

Another user posted, and it worked for me ... go into the properties of the Bluetooth connection and disable everything except 'handsfree dialing.' You will probably then have to re-pair. You won't get streaming music, but I never use that anyway. Hyunday is supposed to be working on a fix, and gave me a rough date of the end of the month. Good luck!
Dave

Bluetooth Problem with my N79

Dear All,
My Nokia N79 is 2 months old now. Since the last two days i have been facing a weird problem with it.
even with my Bluetooth turned on and phone visibility set to Shown to all, My N79 does not get detected by either my PC nor by any other Nokia or Sony Ericsson cellphone.
even when i try to connect to the paired devices i had setup, i get an "unable to connect" error.
Last successful file transfer was done on satrdy, 21st Feb, but since 24th i am facing this problem.
Is there any solution to this....
Is it a Firmware BUG or a Device component Failure...???
Please advice me on the same.
Tanks & Regards,
Cloyd

Other reset is the hard reset.
Try the "3 finger deep reset" which is depress these three keys simultaneously "*" "3" "green phone" and then power on phone whilst keeping those same three keys depressed until you hear start-up tone.
This should ONLY be done if the device doesn't power up normally anymore and it wipes everything in the Phone memory that is not part of the ROM. I presume you already have a backup.
If this doesn't do it then problem is probably hardware and the only option then is to head for the Nokia Care Point..
You can find your nearest Nokia Care POint at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

Help 5800 bluetooth problem with tomtom & vauxhall...

Similar Messages

Maybe you are looking for