Help! a blue screen appear. it said - inaccessible boot device

I restarted my laptop but then this problem appear. I couldnt refresh bcoz it said that my drive locked. How do i do? Im using ideapad s410p

Hi akshaymilner,
Welcome to Lenovo Community Forums!
This seems to be an HDD Problem,
You can try these,
Remove all USB Devices.
Can you try Turning ON the computer and start tapping F2, This should boot the system into BIOS Mode,
While in BIOS Press the F9 Key to load defaults now Press F10 to Save and Exit. See if it will boot now,
If Not, Go to BIOS again and look under Information TAB and check if the HDD / Hard disk is detected.
If not listed, You might need to call Lenovo Technical Assistanc for HDD Issue.
If Listed you might want to try The One key REcovery.
Turn off the computer and press the OKR Button to load Factory default, (Data loss )
Regards
Solid Cruver

Similar Messages

Inaccessible boot device Windows 8

Hi!
My laptop was supposed to restart after windows updating. Instead of that bluescreen appears and says 'inaccessible boot device'. I've changed SATA Controller Mode Option to Compatibility and it still doesn't work. I also cannot open safe mode. Tried pressing F8, shift+F8, Fn+F8. Nothing works.
Please help me.
Thank you!

hi jumanjirose,
It's possible that one of those Windows Updates corrupted some of the Windows system files, causing the BSOD error. If you didn't create a recovery drive using this method, try one of the following:
Option 1:
Enter Push-Button Reset (PBR) mode - this is like a recovery environment to restore the pc from a previous working state. To do this, hold the power button while Windows 8 is loading up - the one where you see the white dots goes in circles (you need to do this twice). If successful, Windows will run startup repair. If it can't repair the error, you'll see this screen:
From here, click Advanced Options > Troubleshoot and you can:
a. Boot from the Last Known Good Configuration
b Boot into Safe Mode
c. Do a System Restore to restore Windows from a working state
d Refresh your Windows 8 PC or Reset windows 8 (note that this will wipe the computer clean)
Option 2:
If Push Button Reset doesn't work, follow this guide on how to enable legacy Safe Mode. When done, you should be able to access Safe Mode / Last Known Good Configuration by pressing F8 on startup or perform the PBR options above.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Blue screen appears

I've bought my S10e in April 2009. it worked properly until a month ago when i was browsing, this blue screen appears suddenly and Windows (XP SP3, home edition) restarts. It happens too fast that i cannot read the message. after logging in this message rises: the system has recovered from a serious error.... and i send the issue to Microsoft. I use Google Chrome as browser. I think when i'm online using WiFi, it happens. I uninstalled chrome but it happened again with Firefox when it tried to open a web page reporting the problem to Microsoft.
I used the check disk tool in Windows but didn't help. I've two drives, Windows run on C: capacity=30 GB, free space=4 GB.
I've run CCleaner to optimize registry before these blue screens.
I also have Kaspersky Internet security installed on my netbook. it works fine.
I've got all Microsoft updates.
Is it the problem of bios? or what?
please help me because i'm very dependent on my S10e.
Thanks

Hi and welcome,
... if that happen again.. look in system event log file...there could be a hint whats going wrong..
How to view and manage event logs in Event Viewer in Windows XP
on the first look ...your free space 4GB ... .. due huge temp data near full .. keep an eye of this ...
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Sometimes Blue screen appears on Satellite M70

Hi there
I must express my overwhelming frustration with my satellite M70 laptop as I have it for more than a year now(warranty expired) and almost from the get go it had a problem in wich a blue screen appeared and the pc reboots...from the error report it is a problem with the graphics card and/or display driver.
I did take it to my local retailer for repair but the problem still remains(gone there 3 TIMES! each time waiting for more than a month for repair!and they did send it to toshiba service...)... as the problem doesnt happen *all the time* it seems they just didnt notice or something :(.
I did update all the drivers but it had no effect on the problem...
So now what?? Do I send it to repair and they finally replace the graphics card...but I pay??!!
This is all very upsetting for me as you might imagine...
And know its worse...it seems to be happening more and more...and many times the computer wont reboot after the bluescreen...it just stays black.
Now almost every time i turn it on it wont boot...the fan will just work for a few seconds and thats it.
Im almost certain the graphics card is defective...can I replace it at home? Argh this just feels wrong, the computer had this problem almost from the start and I sent it for repair...they just did not fix it...I shouldnt have to pay to fix it as I sent it for repair 3 times while it still had the warranty...
Please reply I'm desesperate and have no idea what to do

Hi Andrej and thanks for the reply
But the thing is I have already done that countless times...and the problem is still there...same old same old :(
I have tried seemingly everything...thats why I say its gotta be hardware :S
Having this in mind Id like to know if there is anything I can do(concerning hardware) without resorting to Toshiba service
Keep in mind that Im pretty sure it is the graphics card that is faulty(I dont know if its onboard or not)
Also sometimes when I turn it on the graphics on my pc go weird like an abstract painting or something lol...thats another reason to think its the graphics card.
So anyone can help me?
Thanks in advance for your replies :D

Blue screen appears for 1 second after closing my games apps

I'm the only one here having this issue ?
after i played a game like clash of clans, and i'm bout' to close the apps in multitasking tab,
suddenly blue screen appears and flickering for one second...
i don't know if my unit having a error or there is something like bugs? but its a brand new...
here's the link of video of that issue:
httpswww.youtube.comwatchv=zy55sqScu7g&feature=youtu.be
please help me.. what to do to fix this problem
co'z i cant get a peace of mind with my unit!

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

If nothing else works, you might try this one. It has worked for many others ...
Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414
Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
iPad 2 and iOS 8.0.2 Problems
For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
Here's one person's solution which will help a lot of iPad 2 users!
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

Printer on & off w/ lights, stopped printing, Blue screen appears with "B853B1F4"

HP Photosmart C7280 All-in-one stopped working, tried powering on & off, unplugging & plugging back in. Then sometimes shows "Ink System Failure" Error: 0xc19a0005, or Blue screen appears with "B853B1F4"
Is it fixable or should i trash it & purchase a new one?

The troubleshooting steps in this page may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Re: Satellite A300-29n - blue screen appears on setup of XP?

Hello
I'm working on windows vista and facing no problems
when i wanted to set up XP on the machine ,after loading the files of the windows
it was written "setup is starting windows "
every thing was going well
a blue screen appeared (a problem has been detected and windows has been shutdown to prevent damage to computer ...........................)
plz help me
thanks

Maybe you should continue to use Vista and you will not have any problems. ;)
Which WXP do you use? Which SP?
Is HDD recognized properly? I mean can WXP installation be started or not?
The whole story is strange. I have A300 too and use WXP and Win7 as dual boot. No problems at all.

Tecra 9100, a blue screen appears

When I start up Novell GroupWise on my Tecra 9100 a blue screen appears? Very weird. Can anyone help me to stop this.

ditto--happened on my machine too. I found out that this blue screen can appear if True Color (32 bit) is selected under Colors in Display Properties. Both of you will have to download the update for the Display Driver from the Toshiba support pages. There is a txt file provided for instruction

HT3910 a blue screen appears at the start up

When I start my macbookpro a blue screen appears and stays. Nothing further happens ; can anyone help please?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Left speaker no sound, no wi-fi, hang up after first or second booting then blue screen appears

hi there! my laptop always hangs up everytime I open it. Sometimes it open up after minutes of waiting then gradually hangs up before blue screen appears. I had to long press the start button again and again before I could use it.
By the way, there are times I had to switch into safe mode and found out that the audio is not working anymore. During normal mode, only the left speaker is operational. Lastly, wi-fi signal will constantly disappear after rebooting.
please help
robert

Hi,
Have not seen any reports of negative experiences (unlike recent Microsoft updates) from the last batch of Windows Updates.
I would guess you have a coincidental hardware problem.
A failed HDD would yield an error at boot. You would still be able to boot to the BIOS if you desired.
Normally failed devices (memory, GPU, CPU) will give audible and visual error codes. Exceptions will always happen.
Could be the battery, power supply, or maybe the motherboard has bit the dust. You will probably receive no visual or audible error messages when the motherboard fails.
Try booting with one monitor.
Jaco
****I am not an HP employee****
Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
Errare humanum est.

When I try to tune up my PC, a blue screen appears then immediately shuts down ?

When I try to tune up my PC with the Hp Support Assistant or download my zoo tycoon game, a blue screen appears telling A problem has occured and windows shut itself down to protect data and to disable or remove any new software, and to disable BIOS memory options such as caching or if I need to use safe mode to to remove or disable and components on my computer, then it immediately shuts down? How can I fix this?

What model computer and what Windows version? Blue screens like that can be a lot of things; bad memory, bad hard drive, a virus, a bad driver. The first thing to do is run a full hard drive test in the BIOS and see if there is any physical problem with the hard drive. Then I would do a chkdsk to see if there is a problem with the file structure then lastly an sfc /scannow to see if there are problems with Windows system files. Lastly, I would run a memtest to see if there are memory problems. Post back if you need specific help with any of these things or all of them.

When i try to open a web page, a blue screen appears and it is telling me " safari cannot open the page because i am not connected to the internet. i have an iphone, no problem and a laptop with connection - no problem - not sure what the trouble is.

when i try to open a web page, a blue screen appears - message says - sarfari cannot open the page because it is not connected to the internet. i have an iphone - no proble and a laptop - no problem as well.
what is wrong?

There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Blue screen appears when installing boot camp in windows 7

i have tried four times to run setup and the same blue screen appears and it restarts,
what am i doing wrong please
thanku
xx

Maybe your post should be reversed some how. In any case the Boot Camp form is here:
http://discussions.apple.com/category.jspa?categoryID=237

Blue screen appears on startup and at shutdown

A few months ago, I bought a macbook pro and it was doing fine. But recently, every time it starts, a blue screen appears for a split second then it goes to log- in. Then, every time I shutdown, it will also show up for a split second then shutdown. It doesn't affect the computer but I'm just wondering how to stop it.

I couldn't rember what time it started so, I shut down my computer and the blue screen appereed at 8:39:28. But went I turned it on, the blue screen did not show. So, I turnned it of and on again and no blue screen. I did it several times and now the blue screen isn't showing. But I will post the test that showed in the concel during 8:39, when it powered of blue, to the time I powed it on, when the blue screen did not show. If you need more, I will try to give it to you. I'll post again if it shows up again. Also I should edit out ethernet address too right?
Here's what its says:
8:38:07 PM kernel: I0Surface: buffer allocation size is zero
8:38:47 PM kernel: I0Surface: buffer allocation size is zero
8:39:28 PM mds: (Error) Server: ==== XPC handleXPCMessage XPC_ERROR_CONNECTION_INVALID
8:39:28 PM com.apple.launched.peruser.501: (com.apple.talagent.[236]) Exited: Killed: 9
2/19/12 8:39:28.145 PM
com.apple.launchd.peruser.501
([0x0-0x18018].com.apple.iTunesHelper[284]) Exited: Killed: 9
2/19/12 8:39:28.145 PM
com.apple.launchd.peruser.501
([0x0-0x13013].com.apple.AppleSpell[260]) Exited: Killed: 9
2/19/12 8:39:28.147 PM
com.apple.launchd.peruser.501
(com.apple.mdworker.pool.0[452]) Exited: Terminated: 15
2/19/12 8:39:28.203 PM
loginwindow
DEAD_PROCESS: 36 console
2/19/12 8:39:28.467 PM
shutdown
halt by ___________:
2/19/12 8:39:28.467 PM
shutdown
SHUTDOWN_TIME: 1329701968 466888
2/19/12 8:39:54.000 PM
bootlog
BOOT_TIME 1329701994 0
2/19/12 8:40:06.000 PM
kernel
PMAP: PCID enabled
2/19/12 8:40:06.000 PM
kernel
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
2/19/12 8:40:06.000 PM
kernel
vm_page_bootstrap: 986092 free pages and 54292 wired pages
2/19/12 8:40:06.000 PM
kernel
kext submap [0xffffff7f8072f000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072f000]
2/19/12 8:40:06.000 PM
kernel
zone leak detection enabled
2/19/12 8:40:06.000 PM
kernel
standard timeslicing quantum is 10000 us
2/19/12 8:40:06.000 PM
kernel
mig_table_max_displ = 73
2/19/12 8:40:06.000 PM
kernel
TSC Deadline Timer supported and enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
2/19/12 8:40:06.000 PM
kernel
calling mpo_policy_init for TMSafetyNet
2/19/12 8:40:06.000 PM
kernel
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
2/19/12 8:40:06.000 PM
kernel
calling mpo_policy_init for Sandbox
2/19/12 8:40:06.000 PM
kernel
Security policy loaded: Seatbelt sandbox policy (Sandbox)
2/19/12 8:40:06.000 PM
kernel
calling mpo_policy_init for Quarantine
2/19/12 8:40:06.000 PM
kernel
Security policy loaded: Quarantine policy (Quarantine)
2/19/12 8:40:06.000 PM
kernel
Copyright (c) 1982, 1986, 1989, 1991, 1993
2/19/12 8:40:06.000 PM
kernel
The Regents of the University of California. All rights reserved.
2/19/12 8:40:06.000 PM
kernel
MAC Framework successfully initialized

Help! a blue screen appear. it said - inaccessible boot device

Similar Messages

Maybe you are looking for