HELP ! A FATAL BUG ! ! ! What`s wrong with the SATA port ? ? ?

My MacBook (MD103) got a serious bug here, PLEASE HELP ME !
I changed my main drive to a Crucial 256GB SSD and memory to Micron 16GB, and I also removed the optical drive. The optical drive has been replaced by the original Toshiba HDD. Then, the question has came out! The OS hourly report Errors and restart. Finally, the HDD icon will disappear from Finder and the drive will be changed into a read-only disk (Under the Windows OS installed by BOOTCAMP). Then, I have to format the drive.
BUT the question still happen AGAIN AND AGAIN！ Though, I changed the Toshiba Drive by a WesternDigital one (Model. LPVT 500G), which is the most energy-efficient notebook HDD, BUT the question take place AGAIN when I listening an iTunes music ! ! ! (The music tone was reapted again and adain, and the OSX was shut down in a sudden, without any operation)
I searched some information and did some attempt. The OS can work well when I change the second drive by a old 250GB HDD, but I really can`t use such a slow and small drive for work, and I have to pray for my data every time when I press the power button. So, please help me! Improve the SATA port power management or someting else, THE BUG CAN BE SOLVED BY YOU, THE GREATEST ENGINEERS.
Please let me know the progress, THANK YOU ! ! !

Firstly, Thanks!
I've checked it and if the question didn`t occur, the disk can work well. The I/O speed can reach 113MB/s. And someone said it causes by SATA port power supply.

Similar Messages

What's wrong with the code?

public void run()
try
{     for(;;)
     mgr = (RTPManager)RTPManager.newInstance();
     mgr.addSessionListener(this);
     mgr.addReceiveStreamListener(this);
     try{ /*****port1 = port2 = 29261, which port is only used in here
     localAddr = new SessionAddress(InetAddress.getLocalHost(), port1);
     destAddr = new SessionAddress(ipAddr, port2);
     }catch(Exception e)
          System.out.println(e + " 4");
     try{
     mgr.initialize(localAddr);
     }catch(Exception e)
     System.out.println(e + " 5");
     //set buffer
     bc = (BufferControl)mgr.getControl("javax.media.control.BufferControl");
     if (bc != null)
     bc.setBufferLength(20);
     try{
          mgr.addTarget(destAddr);
     }catch(Exception e)
     System.out.println(e + " 2");
catch(Exception e)
     System.out.println(e+ " 3");
the error when i run the code is like that:
javax.media.rtp.InvalidSessionAddressException: Can't open local data port: 29261
5
java.io.IOException: Address already in use: Cannot bind 2
which means there is error in :
mgr.initialize(localAddr);
mgr.addTarget(destAddr);
But i don't know what's wrong with the code,
can any one help me?

I do not find any problem using the same ports for local and destination address with several unicasts. My problems are others.
But note that the error is even at constructing the localAddress, I mean before trying the destinationAddress. Thus the reason cannot be the former is already in use. In fact I think the later belongs to a remote hosts. Likely, it is trying to access the destinationAddress through the localAddress, but this has not been constructed properly.

What's wrong with the wsdl

We are trying to create a proxy from the following wsdl file and getting an error message: illegal syntax: API:Parameter BINDING has initial value
The webservice that we are trying to consume is from TIBCO .
Can someone please help me to find out what's wrong with the wsdl.
<?xml version = "1.0" encoding = "UTF-8"?>

<wsdl:definitions name = "Untitled" targetNamespace = "http://xmlns.example.com/1268018884234/OperationImpl" xmlns:soap = "http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns = "http://xmlns.example.com/1268018884234/OperationImpl" xmlns:wsdl = "http://schemas.xmlsoap.org/wsdl/" xmlns:xs = "http://www.w3.org/2001/XMLSchema">
     <wsdl:types/>
     <wsdl:service name = "TIBCO__ABAP">
          <wsdl:port binding = "tns:SOAPEventSourceBinding" name = "SOAPEventSource">
               <soap:address location = "http://192.168.9.58:10001/TIBCO_ABAP"/>
          </wsdl:port>
     </wsdl:service>
     <wsdl:portType name = "PortType">
          <wsdl:operation name = "Operation">
               <wsdl:input message = "tns:Input"/>
               <wsdl:output message = "tns:Output"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name = "SOAPEventSourceBinding" type = "tns:PortType">
          <soap:binding style = "document" transport = "http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name = "Operation">
               <soap:operation soapAction = "http://192.168.9.58:10001/TIBCO_ABAP" style = "document"/>
               <wsdl:input>
        <soap:body use="literal" />
      </wsdl:input>
               <wsdl:output>
        <soap:body use="literal" />
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:message name = "Input">
          <wsdl:part name = "Param1" type = "xs:int"/>
          <wsdl:part name = "Param2" type = "xs:int"/>
     </wsdl:message>
     <wsdl:message name = "Output">
          <wsdl:part name = "Result" type = "xs:int"/>
     </wsdl:message>
</wsdl:definitions>

Léon Hoeneveld's response works for me. You will need to download a tool that allows you to edit the WSDL and reorder the values.
I've used a freeware tool like notepad++ collapsed all the levels and opened up the <wsdl:definitions xmlns:wsdl... segment and reordered the subgroups beneath it accordingly.
1. types
2. message
3. portType
4. binding
5. service
Thanks again Léon!

What's wrong with the server?

execute me ~what's wrong with the server? I can‘t use the command nohup any longer.Can somebody help me?
root@shhis1new # nohup
Segmentation Fault (core dumped)
root@shhis1new # nohup ls
Segmentation Fault (core dumped)
root@shhis1new # nohup /opt/SUNWexplo/bin/explorer -w all &
[1] 6871
root@shhis1new #
[1]+ Segmentation Fault (core dumped) nohup /opt/SUNWexplo/bin/explorer -w all
root@shhis1new # uname -a
SunOS shhis1new 5.9 Generic_122300-19 sun4u sparc SUNW,Netra-T12
System Configuration: Sun Microsystems sun4u Sun Fire E2900
System clock frequency: 150 MHZ
Memory size: 49152 Megabytes
Best Regards
<email address removed by moderator>
Edited by: 884082 on 2011-11-22 下午10:00

Moderator Action:
You email address has been removed from your post.
You wouldn't want bad people to send you spam messages for the rest of your life, eh?
Moderator Advice:
If this is the same E2900 that you have mentioned in every one of your other forum posts, then it would seem you need to contact Technical Support and open a proper support request. These forums are NOT techsupport and that system seems so poorly configured that it needs deep analysis. Such investigation cannot be done by using an online forum.
The immediate solution is to log on to the SC of that box and power it down, then boot it back up. At least it will be running after that.

What is wrong with the idl code generated by packager.exe?

Hello everybody,
I am trying to figure out what is wrong with the idl code generated by packager.exe. In the evaluation for the bug posted at http://developer.java.sun.com/developer/bugParade/bugs/4964563.html it says that the IDispatch interface is not exposed correctly and thus early binding of java objects is not possible using the current activex bridge implementation.
As I am no idl expert I have no idea what that means. However, I managed to dig out the idl code generated by packager.exe for the following example bean:
package test;
public class MyBean
     protected int value;
     public MyBean()
     public void setMyValue(int _value)
          value = _value;
     public int getMyValue()
          return value;
     public MyBean getSelfReference()
          return this;
}The corresponding idl code generated by packager.exe is
uuid(81B0BF63-2A55-11D8-A73E-000475EBF021),
version(1.0)
library MyBean
importlib("Stdole2.tlb");
dispinterface MyBeanSource;
dispinterface MyBeanDispatch;
uuid(81B0BF64-2A55-11D8-A73E-000475EBF021),
version(1.0)
dispinterface MyBeanSource {
properties:
methods:
uuid(81B0BF65-2A55-11D8-A73E-000475EBF021),
version(1.0)
dispinterface MyBeanDispatch {
properties:
[id(4097)]
int myValue;
methods:
[id(32768)]
VARIANT_BOOL equals(IDispatch* arg0);
[id(32769)]
IDispatch* getClass();
[id(32770)]
int getMyValue();
[id(32771)]
IDispatch* getSelfReference();
[id(32772)]
int hashCode();
[id(32773)]
void notify();
[id(32774)]
void notifyAll();
[id(32775)]
void setMyValue(int arg0);
[id(32776)]
BSTR toString();
[id(32779)]
VARIANT wait([optional] VARIANT var0, [optional] VARIANT var1);
uuid(81B0BF62-2A55-11D8-A73E-000475EBF021),
version(1.0)
coclass MyBean {
[default, source] dispinterface MyBeanSource;
[default] dispinterface MyBeanDispatch;
};Does anyone know what is wrong with this code and maybe how to fix the idl code? Generating the dll should then be easy (I already tried several variations of the idl code but as my idl knowledge is limited it didn't really do what I wanted).

Then the question is why it does work with visual controls (even if you set them to non-visible)?

What is wrong with the loop?

What is wrong with the loop? I am trying to make the loop with start to end dates. What is wrong with those codes that
I made:
      Calendar startLoop = new GregorianCalendar(2003, Calendar.SEPTEMBER, 01);
      Date datessss = startLoop.getTime();
      Calendar endLoop = new GregorianCalendar(2003, Calendar.SEPTEMBER, 05);
      Date datesssss = endLoop.getTime();
      int result = 0;
      while (endLoop.after(startLoop){
           startLoop.add(Calendar.DATE, 1);
           Date dates5 = startLoop.getTime();
           System.out.println("New Date: " + dates5);
      }Because I got an error those:
while (endLoop.after(startLoop)Anybody know what is wrong with it?

In general you'll get better help if you paste in the exact, complete error message.
In this case it's easy. Count your parentheses.

What is wrong with the screen stays black

what is wrong with the iPod if the screen stays black and won't turn on, but is fully charged.

Could be one of the two:
1. Device sleep - Press and hold power button for six seconds and see if that wakes up the unit
2. Device freeze - press and hold the power and home button for few seconds till Apple logo is seen.
Hope this helps!

What is wrong with the cloned HD?

Hi, there,
I have a G4 Sawtooth, 1.3 GHz, 1.6 GB RAM, with an ACARD ATA-100. An 80 GB HD is connected to the ATA bus of the motherboard, and an 160 GB HD to the ACARD. I cloned Mac OS 10.4.10 from the 80 GB HD to the 160 GB HD. I could boot the 160 GB cloned HD to the window when I was asked about the name and password. I used the name and password, which I have with my original HD. However, the window just shook my password off. I used the installation disc for resting password, and found there was no name or password for the cloned. Besides, the box for entering the name was obscured in gray that I could not enter a name there.
What is wrong with the clone? What should I do to make the clone HD completely bootable?
Thanks.
Robert

Inasmuch as you've provided little helpful information about how you prepped the drive and cloned it, all I can do is suggest the following:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.

What's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

what's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

Hey aries35,
I found the following that goes over troubleshooting the same issue for the iPhone. I know you have an iPad, but the steps should still apply:
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
via: iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Cheers,
Delgadoh

What's wrong with the itunes store UAE? i couldnt buy my favorite songs and movies because there's no "music" and "movies" category. please do something... thanks!

what's wrong with the itunes store UAE? i couldnt buy my favorite songs and movies because there's no "music" and "movies" category. please do something... thanks!

You are not addressing Apple here...
This is a User to User forum...
iTunes Store: Which types of items can I buy in my country?

What's wrong with the fan of my 15 inch retina mbp?

what's wrong with the fan of my 15 inch retina mbp,when i play a big game like Batman ,the fans are so quiet and keep around 2000rpm,but the temperature of cpu is up to 80 degrees.(by the way, i have reseted the SMC for many times,but it doesn't work)

80 degrees F or 80 degrees C?

What's wrong with the following code?

What's wrong with the following code?
Circle cir1;
double rad = cir1.radius

The circle Object was never instantiated.
In other words, you have set a declaring of a Circle, but it has not been created in memory yet.
You will create it using the " = new Circle( PARAMETERS_HERE ); "
Or some other method that returns a circle.

What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out

What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out?

The Firefox versions which come with many Linux distros have the default Mozilla Firefox updater disabled and use the distros built-in updater.
See this - http://linuxforums.org.uk/netbooks/install-firefox-6-on-an-acer-aspire-one-running-linpus-lite-linux/

All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store?

All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store? do you know? or do you have have the same experience?

I still have access. Must be your phone or your internet connection.

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

HELP ! A FATAL BUG ! ! ! What`s wrong with the SATA port ? ? ?

Similar Messages

Maybe you are looking for