Help a newbie plz

Can u help answer a few questions plz. Which adobe flash player do u download on the IPhone? Gives me 2 options...option 1 Intel-based macs or Option 2 PowerPC-based Macs. And how can I sent multi messages. Or u can only send one at a time? Why do I get viewmymessage instead of the picture itself? Do I need to request ATT for that option? Sorry for asking a lot. Please help Thanks

current work around for sending MMS's
All you do is type in the phone number + the cell company that that person uses doamin address (Example for Tmobile: [email protected]) I went in and added the addresses of the pepole I would most likely send a MMS to to my address book. Yeah you ahve to take the time to figure out what cell company they are using but after the initial setup you are ready to go from then on. here is a list of all the cell companys tags.
Alltel = [email protected]
AT&T = [email protected]
Boost Mobile = [email protected]
Cingular (AT&T) = [email protected]
Einstein PCS = [email protected]
Sprint = [email protected]
T-Mobile = [email protected]
US Cellular = [email protected]
Verizon Wireless = [email protected]
Virgin Mobile = [email protected]
*x is the digit of the phone number you send it to
not the answer you want but I hope this helps

Similar Messages

Help the Newbie, plz

I have another question. Let say that I ave 6 channels for testing and I have the VI to do I/O for the each channel. However, depending on the testing period, it sometimes takes a long time. So, how can I automate the process. Let say for channel 1, it gets the defaulted I/O paths and moves onto Channel 2 once channel 1 is done without me being there to do it manually? Thank you in advance.

First thing to do is to go to http://www.ni.com/devzone/lvzone/fundamentals.htm and check some of the resources available for training. As far as answering your question directly, you can use any number of methods. One is to put you existing program inside a for loop. If you create an array of test setups and put it outside the loop and wire the array through the for loop, the auto-indexing feature of a for loop will automatically extract each element, run the test, extract the next, run the new test, etc. until all of the array elements have been extracted. The for loop will then automatically stop. You can also use a while loop. This will give you a bit more flexibility but you have to do some more coding. You would bascially get the array size, and tell the while loop to stop when the iteration count is greater than the array size. The advantage of a while loop is that you can add a stop button if you want to prematurely stop. A while loop will not automatically auto-index and array but it can be selected by clicking the entry tunnel and selecting it.

I selected restore factory settings on my ipod touch but now after restart it stuck on apple icon what will i do anybody help me out plz,even it's not appering on itunes on my p.c

i selected restore factory settings on my ipod touch but now after restart it stuck on apple icon what will i do anybody help me out plz,even it's not appering on itunes on my p.c

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

FIFA 14 ULTIMATE TEAM HELP PLZ HELP ME ASKED THIS QUESTION TOO MANY TIMES BUT NO HELP ME SO PLZ HELP ME PLZ

HI
i like playing fifa and i wanted to start a fifa 14 ultimate team but th problem is that i know some things about fifa but not too much and i was wondering if you guys/girls can helpl me out
you see the problem is that i dont know how to start off fifa 14 ultimate team lke what should i do when i start off and what should i should i do after
i tried fifa ultimate team before and was no good because i always had no money left and my players were bronze and had no more contracts so can you guys/girls help m out plz
plz help me out and reply back to me by this post plz need your help a lot plz help me plz
thanks

It's best to Google for answers. Here's one.
http://www.fifauteam.com/fifa-14-mobile-ios-android/
 Cheers, Tom

Help a newbie 2 Yosemite.

Help a newbie 2 Yosemite. I just bot a new Mini as my old 1 (7 yrs) wouldn’t dwn load new up-dates written in Intel. The programs of mail/Safari/ &c. are all different & I’m @ a total loss. I’m a nerd, not a geek. I need simple “how 2s”.
Like how to sort mail, what do the function buttons access (F12 ain’t Google a’more). Are there other grps I can go 2 directly 4 kindergarden answers?
Pls e-mail me ***** . I don’t even kno if I can get bak here.
<Email Edited by Host>

Like dz Yose have "spaces" like Lion?
They are now called Desktops.
Mission Control - Mac Basics
Mission Control preferences - OS X Yosemite

My iphone 4 was working good until IOS6 update, now I can't hear anything, my ear phone donot response ...Speaker are ok..if some one call me...they can hear me ...but I can't hear them.....please desperately need help...plz suggest...all reset is done...

My iphone 4 was working good until IOS6 update, now I can't hear anything, my ear phone donot response ...Speaker are ok..if some one call me...they can hear me ...but I can't hear them.....please desperately need help...plz suggest...all reset is done...except restore ...

Anyone? . . . :S

Creating forms (NEWBIE) PLZ HELP!

hi!
im trying to create a form as follows!
the user specifiees the number of say questions in jspPage1, getting the number of questions and displaying the number of forms on the next page jspPage2.
for example if the user specified that they wanted to enter 10 questions the next page would create 10 of the same forms.
or allow the user to enter 10 questions on the same form by adding the data to the database and refreshing the page. displaying a empty form and indicating whther update was successful!
plz help!

what i mean is!
i need to create form that when the data is submitted the data is processed andit refreshes it self so that the user can enter some more data.
makes sense?

Plz help complete newbie

hi all, I just started learning JAVA 2, I am skipping lots of HTML, cuz it's boring me like crazy. anyway, I have Sams teach yourself java2 in 21 days, and it says I need this program called Java 2 Software Development Kit, Standard Edition, version 1.3 , but I can't find it! I looked in the search, I checked the api section, nothing, and the book says I need this to start off, so plz help me out :) thx in advance. o P.S. can a CGI-bin be made with java2?

Perhaps your inability to locate the compiler software
should suggest to you to perhaps this isnt your ideal
career.
Not a flame or troll, but how many people have posted
to this forum with this same problem? Which part of
clicking on the download link are they having
problems with?I took a Java class a little over a year ago and there where several people in the class who couldn't figure out how to open notepad and save a file, and they had absolutley no idea how to do anything with DOS. I mean if you can't understand how to use software how can you expect to be the one to write and design it. Its like a car engineer not knowing how to drive. I'm not trying to flame either, but snafu_uk makes a good point.

I am a newbie plz help me out

Hello,
I am writinf g the very first program and got stuck, the program is :
class Tirtha
public static void main(String args [])
System.out.println("Hello World !!");
I saved the program as Tirtha.java in the Bin folder in j2sdk, but when I compile I find no error but durin the runtime I am having a error saying :
Exception in thread "main" java.lang.NoClassDefFound Error :Tirtha
This error also exists even whwn I try to run any program given in the book(The complete reference Java 2).
Please help me out.
Thank You
Tirthankar

Javapedia: Classpath
How Classes are Found
Setting the class path (Windows)
Setting the class path (Solaris/Linux)
Understanding the Java ClassLoader
java -cp .;<any other directories or jars> YourClassNameYou get a NoClassDefFoundError message because the JVM (Java Virtual Machine) can't find your class. The way to remedy this is to ensure that your class is included in the classpath. The example assumes that you are in the same directory as the class you're trying to run.
javac -classpath .;<any additional jar files or directories> YourClassName.javaYou get a "cannot resolve symbol" message because the compiler can't find your class. The way to remedy this is to ensure that your class is included in the classpath. The example assumes that you are in the same directory as the class you're trying to run.

Jaxrpc compilation exception(plz Help very Urgent Plz)

Hello there....
while deploying a simple webservice using deploytool i m getting this error while the application that is being deployed is not even using ejbs....
i m trying to compile the example given on the forum by Qusay H. Mahmoud, so plz help me to get out from this......
Thank u ....alll
distribute: C:\Sun\AppServer\apps\Add.war
deployment started : 0%
Deploying application in domain failed; Error while running ejbc -- Fatal Error from EJB Compiler -- jaxrpc compilation exception
; requested operation cannot be completed
!!! Operation Failed !!!
!!! With The Following Failure Messages !!!
Deploying application in domain failed; Error while running ejbc -- Fatal Error from EJB Compiler -- jaxrpc compilation exception
; requested operation cannot be completed
Error while running ejbc -- Fatal Error from EJB Compiler -- jaxrpc compilation exception
[Completed (time=24.0sec, status=13)]
**********************************************************************

I had a similar problem with Sun App Server.If you can check the domain/log/Server.log.It explains a valid endpoint address is missing in the deployment.To do this open the deployment tool and click the Implementation class in the tree(Bean Shaped).
You can see a endpoint tab within which you need to configure the Endpoint address.
The deployment went fine after this.
Good Luck !!!

Please help a newbie. Can not get color replacement to work

Hello,
Let me start off by saying that I am a newbie to PS in general. I have been on the software for a short period of time. I was working with some images and I was making layers trying to bring color out of BW photos (make a BW layer and use the brush to get the color back in certain areas). I installed RAW 5.3 and now when I make a BW layer I can not make the adjustments on the layer any longer. I get an error message stating I can not make adjustments to the layer. But in all the manuals I have it states to make the adjustments on the layer. I am really confused. I am looking at my plug ins on PS "homescreen" and there are 2 Camera RAWs (5.3 and 5.0). I was wondering if I delete 5.0 that may help (how can I do this). Also, I can make a color picture and remove the color from the main image, but that would just take too long to only bring out the color in a small area. I am wondering why this process is now "reversed"
Also, is there a setting that may not be right to make the color replacement on the layer that may not be right on my computer. Again, all this started right after installing RAW 5.3. I am running an iMac OS X v10.5.7.
I am sorry if I am leaving some information out, but I am a newbie and do not know what other information might be useful.
Thanks for any help, and please let me know if there is additional information that you may need to help me.
Thanks,
Mike

Camera RAW 5.4 is the newest

HElp required..plz...plz.help..fast

hi frndz,
i neeed ur help...i hav sum doubts ..plz answer.i hav nokia 3250 fone..
1. u kno ders 1 hole wer we incert chargerwire 2 recharge batreee....the pin in dat hole is broken...ma doubtis dat whether it can b repared..?..is it so costly 2 reapir?..is it a risky damage?..
2.i hav downloaded many songs..but most of dem windows meadi audio....i hav onli real palye rinma mobile..so onli rm,mp3,mp4 audio formats r working...if u hav ny idea..abt it.plz say..and plz give me da link 2 dload ny player 4 mobile which can play all audio formats..
3.im not able 2 send text messages..itznot d aprblm wid credit or ny thing...wenever i write messages 2 ne1..it wil say sending failled...can ya tel me sum solution..
SO THESE R MA DOUBTS....I HOPE I WIL GET A SUITABLE ANSWER 4 MA QUESTION...MAY GOD BLESS YA........

let me try, CMIIW..
hi friends,
i need your help.. i have some doubts..please answer, i have nokia 3250 phone..
1. you know theres 1 hole where we insert chargerwire to recharge battery....the pin in that hole is broken...my doubt is that whether it can be repaired?..is it so costly to repair(expensive)?..is it a risky damage?..
2.i have downloaded many songs..
but most of them windows media audio....
i have only real player in my mobile..
so only rm,mp3,mp4 aodio formats are working ..
if u have any idea about it please say..
and please gime me the link to download nyew player for my mobile which can play all audio formats..
3.im not able to send text messages..its not the problem with credit or anything...whenever i write messages to new one.. it will say sending failed.. can you tell me some solution?
===============================
1.expensive is relative. for you might be cheap rather than me. and depends on nokia care.
2.i havent try others player
3.please check message number on your mobile phone
cheers...
n gage classic , waitin for n gage3 (will there?)

Help needed- newbie trying to setup xerces XML pasrer

Hello all,
I am new to Java and XML.
I am trying to write a simple java program that will use the xerces parser and will read the XML file.
I have installed xerces 2.8.0 and put in on a specific location on my hard drive.
I also added the xercesImpl.jar file to the CLASSPATH variable.
I am trying to compile this code:
import org.xml.sax.XMLReader;
public class SAXParserDemo {
public void performDemo(String uri) {
System.out.println("Parsing XML File: " + uri + "\n\n");
// Instantiate a parser
XMLReader parser = new SAXParser();
public static void main(String[] args)
if (args.length != 1)
System.out.println("Usage: java SAXParserDemo [XML URI]");
System.exit(0);
}//IF
String uri = args[0];
SAXParserDemo parserDemo = new SAXParserDemo();
parserDemo.performDemo(uri);
}//MAIN
The error I get is on this line : XMLReader parser = new SAXParser(); stating that it cannot find SAXParser.
What am I doing wrong? is there something else I need to import?
Help will be much appreciated.
Sorry for the newbie question.
Cheers,
Mike

The error I get is on this line : XMLReader parser =
new SAXParser(); stating that it cannot find
SAXParser.
What am I doing wrong? is there something else I need
to import?Well, yeah. Your code shows you already know how to use the "import" statement. The compiler says it can't find SAXParser, and you correctly suspect that you need to import something. So the logical step: you need to import SAXParser.
But you don't know what package it's in, right? Well let me just look it up in the API documentation for you... here it is... javax.xml.parsers.SAXParser. Take note of the existence of documentation for the next time you have this sort of question.
http://java.sun.com/j2se/1.5.0/docs/api/

Trying to create install script in PackageMaker...help for newbie

Hello,
I am trying to deploy a solution as an install package. Currently, there are 3 items inside the folder that needs to be installed in the /Applications folder. This in itself is easy. However, when I create upgrades to the solution, I want to carry over one file from the previous installation to the new one. Is there a way to have this upgraded version install and instead of removing all of the earlier files, can it install the new files (which are 3) and carry over 1 of the other files.
I hope this makes sense. Thanks for any input or sample scripts that I may be able to modify to accomplish this.
Thanks,
Stephen

Thanks for your time!
Perhaps it would help if I explain a little further my situation and what I am trying to accomplish.
I have a database runtime solution that I want to distribute. I have all of the necessary files in a single folder, let's say, named "Progam 1.2". Since whenever I upgrade this version, I need to have the old data file from the previous version on hand to import into the new file, I create a new folder called "Program 1.3" So after the installation, I would have both folders. The user then opens the new version and the program then will import the previous versions data. At that point the user may delete the previous version folder entirely.
My question is how can accomplish an install so that the new version will not overwrite the previous folder "Program 1.2" when installing the upgrade to "Program 1.3" since I need the data file for updating the data. Ideally, I would love to have the new folder installed and the single data file in the previous version folder be copied to the new versions folder and be renamed to "Previous Data" so that the new version can update the data.
Again, I am a complete newbie in this arena and have simply been doing DMG files where the user copies the new version to the applications folder. But if there was a way to automate this installation more, I would like to do that.
Thanks again for your help!
Stephen

Help me overclock plz

sup guys...
can u guys gimme some tips to overclock my cpu...i have an amd 2100+...i wanna get the best out of my computer...can u plz help

Just a little confused, you say you have 2100+ but you equipment list shows a 3000+ cpu. The are several programs you can use to help set up you BIOS to oc the cpu and fsb. You can do it manually with the mobo you have and you can start by setting the fsb to 175 and multiplier to 10. These are low numbers but they are good starts. Then if you want to go higher on the fsb, increase it by 5 but watch your temps on the cpu in PC Health of Bios. At some point the unit will not boot up if you go to far. Then you will have to reset your CMOS.
The easiest thing to due is download FuzzyLogic 4 or Core Center and let them get you into a starting range.

Help a newbie plz

Similar Messages

Maybe you are looking for