Help About Usb Cable
Dear Sir I Am Using Nokia 2690 When I Am Using Usb Cable To Connect My Phone Pc Is Saying Thar Usb Cable Not Recognised How To Sovle This Problem I Have Nokia Pc Suite I Tried To Connect With That
Are you using the USB cable supplied with the phone or some other ?
Similar Messages
-
when i connect my usb cable nothing happens.. isn't itunes suppose to open up and on the left hand side of my itunes it should say ipod or somthing. i also tried just opening my itunes my self when i connected the usb cable but my ipod doesnt even appear in my itunes. can anyone help?
Hi Illaass...I saw that but was putting the best construction on the statement that the lack of WiFi was due to a technical problem that might be resolved soon. Maybe I was reading too much into this and not thinking there was a really urgent need to connect. But, you are right, DB and email become problematic without WiFi...unless the OP could go to a Starbucks and email to the office
-
My Ipod classic 160gb is dead,It only responds when I plug it in to cpu via usb cable then the screen blinks.When I try to reset it the Apple logo appears but the apple logo blinks on and off to as long as i hold the buttons down,when i realease the reset buttons it just blinks back and fourth to the blank gray screen,it worked fine yesterday night this morning its tanked.is this unit completely dead or can something be done at home?
Thank you for your help
IceI wrote this long time ago, have a read and see whether it can be soloved
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote -
Having problems with USB cable, please HELP!
While trying to download aim/aol I was having problems with my USB cable and my phone being connected, it was like they were showing they were conneted but when I tried to download aim it said no drivers were recognised. My phone was giving me the option when the USB cable was plugged in asking me if I wantd to do something to do with the media mass storage.
Anyway, once the drivers were downloaded to my comp and I plugged USB cable into my phone and comp i'm no longer being asked on my blackberry about the mass storage, my phone doesn't seem to be recogniaing tht it's linked up to my computer at all even though it's showing the little plug thing in my blackberry and coming up on the computer.
Is there anybody out there who can help me?!
Please!
Cheers!Go to Options -> Media Card -> Mass Storage Mode Support: On
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" APPEARS.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT???
Please don't shout! Using all uppercase means shouting on the internet. If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet? Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network? Or do you have other options? -
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?
iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538 -
I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!
Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
Read:
http://www.apple.com/support/iphone/assistant/restore/ -
I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?
If not successful:
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try another USB port and cable
Try another computer to help determine if you have an iPod or computer problem -
In the attempt of updating my ipod touch, i am faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks
See if placing the iPod in Recovery mode will allow a restore via iTunes
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have a computer or iPod problem. -
I do a lot on my iPad and now some almost all the stuff I do on it won't download cause well my iPad is out of date I know how to update it but want to know is why USB cable won't work with my iPad u can hear it sync to the computer but it won't sync to I tunes I just don't get my phone will sync to I tunes with the same USB cable what am I doing wrong please help me
This is the ipod touch forum
-
Neither my iPod Touch nor my iPhone will show up in iTunes when I plug in through the USB cable. My software is updated, I've restarted everything, I've reset the devices, but still no luck. Help?!
Check your System Profiler to see if your computer is recognizing them. You may need to reset the computers SMC.
Resetting the System Management Controller >>
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G + 120G OCZ Vertex 3 SSD Boot HD -
HP Deskjet 3520 e-All-in-One Printer. Help tells me to connect to computer with USB cable
I cannot scan anything at the moment despite the fact that I was able to do so several weeks ago. I went to the HP online support site and downloaded a scan doctor programme. It tells me that I do not have the proper scan software on my system and to download it from the HP website. It does't take me to the specific software I need but to a list of things I don't have so I downloaded all of this. I am half way through the setup process for one program and it is asking me to connect the printer/scanner to my computer using a usb cable so that "the settings of your wireless network can be communicated to the printer". I don't remember getting a usb cable with the printer but if I did I have no idea where it now is. What are the chances that finding this/buying this will actually solve my problem and is there a way to solve them without the cable? Any advise would be greatly appreciated.
Hi @translator82,
Welcome to the HP Forums!
I noticed that your HP Deskjet 3520 is telling you to connect it to the computer with a USB cable. I am happy to help you with this connection issue!
To download the software, please visit this website, HP Deskjet 3520 e-All-in-One Printer Drivers, if you are using Windows 7 or above, it is recommended to use the HP Printer Install Wizard for Windows. If you do not know the Operating System you are using, please visit this website. Whatsmyos.
In the meantime, page 33 of your printer's user guide has all the options of how to connect this printer. User Guide. For the traditional wireless setup you will need a USB printer cable. Otherwise, you can always try Wireless Direct.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
N95 crashes in Data transfer via USB cable, help?
I ve been using my N95 with no problems for more than a year. Sometime ago I bought a new 8Gb Micro SDHC memory card, it was recognised by the phone and worked perfectly. But after the card was stored with data for more than 1gb, the phone crashes everytime I try to copy even the smallest file on the memory card through Data transfer mode via USB cable. Than I try to copy a file an error message is displayed in Windows XP and the phone reboots. The strangest thing that I can copy without a problem even a 500 mb movie file to the phone if the stored space on the memory card is say like 985mb, but after that it will crash even with the copying a 10 kb text file.
Any help would be appreciated.No, its not the file system or Memory card itself - cause transfering a data through a card reader works fine and the phone recognize correctly everything transfered. Can it be the case of USB cable driver? May be I need to install it or go for a newer version? BTW, I removed Nokia PC Suite from my notebook - cause I dont used it much, but this program still used a lot of my PC resources without asking to. I belive that PC Suite is not nesessary for using the phone through a Data Transfer mode?
-
Since receiving a iOS software update (6.1.2) my iPad has frozen and only the iTunes icon and a usb cable show on screen. I am unable to access any App. Can anyone help or point me in the right direction. this was raised with Apple and ticket number advised on 3rd March but not a word from Apple since.
Thank youTry and turn off iPad/iPod and proceed to step 3 of Recovery Mode.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.
Maybe you are looking for
-
Calling web service in Offline adobe form
Hi all, I have created webservice in backend system and have see it in SOA Manager. Have set the HTTP authentication as UserID/Password for the defiend service via SOA Manager. I am using the wsdl of the webservice created from "Open WSDL document fr
-
Only one display resolution option for monitor
I just installed a new SSD in my computer, and then installed SL onto the drive. I have an Asus monitor, and Display Preferences on the SL install on the older HD gave me a variety of screen resolutions to choose from. But on the SSD install I only h
-
I have a Lenovo Yoga 11, and have an Etextbook on a website named chegg. But I cant scroll through the pages or click on any tabs once the books open, the service technition from chegg said I might want to try using Mozilla Firefox, but I cant get it
-
Hi all, I am new to AQ. I have a question regarding the dequeue ordering, hope someone can help. Is it by default the dequeue procedure will dequeue a message from an AQ in the way of FIFO ordered by enq time? Any other option do I have? Thank you, K
-
How to "smart search" and MacKeeper from Mac Book Air Safari?
I have a Mac Book Air 13 inch, mid 2012, 1.8 Gh,. Daughter plays videos from places she shouldn't. Whenever we click for a new search window in safari, smart search browser add on is displayed and a pop up mackeeper tab is opened... It won't even le