Help! Accidently updated firmware of Laserjet pro 400 with Laserjet CP4525 firmware

Help! Accidently updated firmware of Laserjet pro 400 with Laserjet CP4525 firmware. The printer is now just spewing out pages and never reaches a ready state to put the correct firmware on. I really hope I haven't bricked it just by a silly click.
Can anyone help or suggest a way to put the correct firmware on?
Cheers
Glyn
This question was solved.
View Solution.

The product might be receiving the earlier sent firmware update as a job in the print que. Delete pending jobs from print queue & connect network cable to printer. The device should perform normal boot till READY state.
Download and use easy firmware upgrade utility using following HP web link to upgrade priner firmware:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
(Although I am an HP employee, I am speaking for myself and not for HP)

Similar Messages

HELP! UPDATING FIRMWARE? SERIOUSLY THIS IS STRESSFUL! ):

How do I update my firmware? I downloaded what I needed on Mac. The version two thing. then selected that file for the administration. and it says that the image file is incorrect. I keep doing this. IT WONT WORK. Am I doing something wong here? My router is plugged up into it and everything, Idk what's going on. PLEASE HAVE CLEAR STEP BY STEP INSTURCTIONS! I really need help. BTW I' using an M10 Valet.

Just download the correct file(firmware) which is Ver.2.0.03 (build 4). Once downloaded go to administration>firmware upgrade and select that file that you have downloaded.

Can anyone help about updating error-Acrobat 9 Pro

Hi all,
I am running Windows Vista Home Premium, SP2. In the past, I have had issues with error 1601 - Windows installer could not be accessed - when trying to update Acrobat 9 Pro. I then uninstalled SP2, and everything updated in Acrobat just fine. That was about 9 months ago. since then, updates have been fine in Acrobat. Now that 9.4.7 has arrived, I am getting the same error. I have installed 9.4.6 and everthing seemed fine. Can anyone direct me to getting this resolved? I am not willing to uninstall SP2 - it just takes too long to reinstall.
Thanks in advance.
Kevin

There are many reasons why "automatic" updates may not work
The usual fix is to download and install the updates manually
All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

I need HELP connecting a M-Audio FastTrack Pro USB with a Behringer 1202!!!

i need some assistance wireing up my personal studio. Im running on a Mac Pro Tower Logic 8. I have a M-Audio FastTrack Pro USB interface and want to hook up a Behringer 1202fx mixer. How exactly do i do the wiring for this???what settings do i need to change in system preferences or in Logic.????? PLEASE HELP ME!!!!!

It depends what you want to do, and what gear you are hooking up and what you want to do with it.
How you hook it up really depends on your needs, which you don't specify.

I was installing a new update on my MacBook Pro. With only 20% left it said "an unknown error had occured, please restart your computer." Now that I've restarted - I can't log in!

Ok, my MacBook haven't had any issues earlier, until today. At first Safari was acting kind of weird in that sense that a lot of letters were missing when you went on certain webpages, so I thought of updating since an alert-window popped up and notified that new updates were ready to be installed. So I opened up App Store through my Applications-folder and selected update.
First it asked if I wanted to connect my Mac to a powersource but since I had charged the battery to 79% I didn't think it was necessary. So I continued, computer restarted and began installing the updates.
Everything went fine until it was approximately three minutes left. An error message popped up and said something like "An unknown error has occured. Please restart your computer and try again". I pressed OK, rebooted my computer and when it asked for my password I typed it in. After I pressed OK, the computer indicated it was the wrong password. I tried multiple times and sometimes with different passwords... so now I can't simply log in! What's the problem?
TL;DR - Updated mac, failed after five minutes and now I can't log back in since "I have the wrong password"

Forgot Your Account Password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.

Update of Acrobat X PRO fails with Error 1406

Here is a copy of the error message:
The registry key listed there cannot be found in the registry.
Acrobat X PRO, version 10.1.6. Windows 7 Ultimate, version 6.1, build 7601, service pack 1.

Hi Amorphosa2,
Please refer the kb: http://helpx.adobe.com/acrobat/kb/error-1402-error-1406-acrobat.html .
Regards,
Romit Sinha

Laserjet pro 400 MFP M475dw after new firmware no more WPA2

Dear all,
After I updated the above printer I was unable to connect to our WIFI network. Our SSID is hidden and has a WPA2 security. Before the upgrade everything was working fine, but now i'm unable to connect. When you enter the SSID manually it askes for the security encryption WEP or WPA. Where did the WPA2 option go???
When we use WPA we are unable to connect.
Can we download the older firmware again? I can't find it...

Hello janwillem_v,
The Laserjet Pro 400 MFP M475dw is a commercial printer. I would suggest to post in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

LaserJet Pro 400 MFP not working on the network port that works HELP !!!

I have a new LaserJet Pro 400 MFP (M425dn) USB works fine. When I remove the USB and plug it into the network Port no network can be found - It doesn't pick up any activity. So I test the network with my laptop ( connectivity is confirmed ). The network port is working properly- I plug in the LaserJet Pro 400 MFP (M425dn) and restart it - no network activity. I tried several ports in the front office and the printer can't connect to the network. BUT HERES THE FUNNY THING . If I take the printer to the back room where the router/switch is and plug it directly into the switch
( the same port as the front port ) it works !!!!! so why doesn't the printer work at the front office network port, where all the other devices work just fine using the same port ? But it will work, at the router/switch using the same port lol this is drving me crazy
any help ? ? ?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HELP! My HP LaserJet Pro 400 color MFP M475dn printer will NOT print!!!!

HP LaserJet Pro 400 color MFP M475dn- CE863A
Printer is on a network and can connect to multiple computers that include: Mac OS X, Windows 7, and Windows XP.
When I try to print from my iMac, the printer queue says "The printer is not connected". When we try to print from the Windows computers, it just sits there in the queue and doesn't print. When I go over to the printer itself and try to print either a demo page or a supplies page directly from it, it says on the screen that is printed it but nothing happens. It doesn't hum or anything! The port where the network cable is connected is lit green which HP says that means that the network cable is connected. We have had this printer for a year now and something like this has never happened.
I haven't switched any software or anything before this happened. It was working fine on Saturday when we were using it, but when we came into work today, it just decided it would stop printing!
I am stumped! I tried 'pinging' the printer's IP address from my iMac and it pings just fine. Does anyone have any tips?
(I tried doing the obvious too- like turning the printer on and off and shutting the computers down- and nothing!)
This question was solved.
View Solution.

Okay, so I'm feeling slightly stupid right now. I decided I would shut the printer down for about an hour to see if that was it and what do you know- it was! I had shut it off a few times before but I guess it just wasn't long enough. What a pain!
Thank you to anyone who took the time to read this! Sorry to waste anyone's time!!

Windows 7 32 bit with no support for HP Laserjet Pro 400 color M451dn help.

I live in a mac / PC house, I have to admit that the apple movement is growing here.
My problem Is getting my small little PC netbook Windows 7 32 bit to be able to print to my new HP Laserjet Pro 400 M451dn printer which is plugged into my 2 TB Time Capsul.
I have been successfull connecting the mac computer, and my old Windows XP computer and they work perfectly.
Everything is connected throught an etheir net corded network in the house.
I used Bonjour to connect the Windows XP computer and it worked like a charm.
When I used Bonjour to connect with my Windows 7 computer the pinter HP Laserjet Pro 400 M451dn is not listed. I have a disk with the drivers that came with the printer but it is a setup disk which is not able to provide the necessary drivers.
If any one has some suggestions I am open to give them a try. I have a portable CD / DVD player burner that I can hook to the net book as it does not have a CD drive.
Thanks

Okay, so I'm feeling slightly stupid right now. I decided I would shut the printer down for about an hour to see if that was it and what do you know- it was! I had shut it off a few times before but I guess it just wasn't long enough. What a pain!
Thank you to anyone who took the time to read this! Sorry to waste anyone's time!!

LaserJet Pro 400 M401dn - 79 SERVICE ERROR

We have only had this printer less than a year and I am getting a 79 SERVICE ERROR. I have power cycled, unplugged and all the normal tries... no go. It will print the menu map but will not accept a print job from a user. I try to get to the printer page on HP.com but it errors out so I cannot get to any of the support docs for the model. Anyone out there have a suggestion?

I ran into this same problem with the LaserJet M401dn. I noticed this issue occured when the printer was hooked up to the PC via USB. I followed HPs steps on trying to fix this problem and needless to say, their steps weren't worth a hill of beans. The printer is working now now via these steps that I'm going to list. 1) Restart the printer with only the power cord being attached. If you're STILL getting the 79 error service, then it is most likely a firmware issue. Luckily for me it wasn't. The printer started right up as it should.2) If your printer starts right up, attach an Ethernet cable from the printer to your router/switch/DSL or cable modem.3) Select the Network icon on your printer screen and check to see if your printer has authenticated to the network and lists an IP address. If you're on a home network the IP address will show something like 192.168.x.xx. 4) Once connected to the network you'll run a firmware update. Click on your Settings icon, select LaserJet Update, Check for Updates Now. Continue by selecting the update and download and install. After the firmware installs, at this point you might be able to get the printer to work by hooking the USB cable back up to the printer. I on the other hand did a couple other steps before hooking the printer back up. 5) I installed all of the Windows Updates (critical), updated Java6) Uninstalled the HP printer software for the M401dn and restarted the PC7) THIS STEP IS NOT FOR THOSE THAT AREN'T FAMILIAR WITH EDITING THE REGISTRY. If you have no knowledge of how to edit your registry, then PLEASE DO NOT ATTEMPT this. Have someone with knowledge do this step. I, nor HP can be held responsible for any mistakes that you make with this step. DO AT YOUR OWN RISK. In the registry I searched for Packard and deleted all Keys or entries that had M401 listed. DO NOT DELETE THE KEY IF IT DOESN'T LIST M401, as there are Hewlett-Packard printer drivers that are built into the operating system and they do show up in the registry.I ran through the registry twice searching for any sign of the printer driver being installed. Restart the computer again.8) Reinstall the HP LaserJet Pro 400 M401 Printer Series PCL6 Print Driver that is relevant to your PC. (Sorry, I don't know how to deal with Macs.) DON'T download the Full Software and Drivers or the one WITHOUT the installer. Don't use the disc to install the drivers either. Just download the most recent version of the software from HPs website. Install the software and attach the printer when asked to do so. Hopefully you're golden at this point just like I was! If for some reason this doesn't work for you, I would format your hard drive and reinstall Windows and all of your software. Apparently there is something within the registry or on your computer that is keeping the printer from working. I hope this helps you all out!

HP LaserJet Pro 400 MFP M425dn won't print text at 72 point size or larger

My workplace recently purchased an HP LaserJet Pro 400 MFP M425dn all-in-one printer. It works excellently with the exception of the fact that it won't print text that's 72 points or larger in size. I've tried numerous fonts that're pre-installed with Windows, and all of them print properly at point size 71.5 or smaller; anything else simply doesn't show up in prints. The content that's sized at 72 points or higher *does* affect the flow of other printed content on the page, however. It's like the 72-point or larger text is occupying space, but it's completely invisible on the printed page. I've tested this using Microsoft Word 2002 on three separate computers, two of which have Windows 7 installed and one of which has Windows Vista installed. The problem is identical on all three computers. The printer is connected via ethernet cable to our wired network. I've installed the included printer software, and I don't believe that there are any updates to it that weren't installed up to this point. Any thoughts on how to resolve this issue?

hello, i only made an account to solve this for you guys because it has been a headache for me also.... let me apologize before hand for terrible grammar and punctuation i am in a huge hurry Now this may not work for everybody but i fixed it on my machine with the following now before you print ...use (ctrl+p) in your word processor to open the print window click on (properties) then navigate to the (advanced) tab now, I have a section called printer features under this category there is an option to "send truetype as bitmap" enable this and see if it can help any of you, for me, with this ENABLED I can print any size font my word processor will allow me to type specs of my machinedell d6420win7msoft word 2007 printer itself is hp laserjet 200 color m276 printer driver is HP LaserJet 200 color MFP M276 PCL 6 i understand that this printer and driver is not identical to yours per se but the nature of these drivers makes it highly likely that this solution will work for most of you if this helps, have somebody else post it more noticeably because i will probly not be signing back in to this website i created this account just to post this and hopefully solve this annoying issue for many of you ...no kudos needed

Laserjet Pro 400 MFP M425DN Can not connect to HP Web Services

I have a Laserjet Pro 400 MFP M425DN printer on a network running windows 7 and we Can not connect to HP Web Services. When we use the display on the menu it comes back with error "Internal Processing error, try again or check firmware update" We installed the new firmware but still get the same message. IF type in our printers IP address into our browser we get the info on our printer but if we go to the HP web services tap and click enable it trys but come back with a "connection error"
Any ideas?
Thanks
Paul

I just updated my Firmware on this printer today to the latest version dated May 3 2013 and Web Services
worked. Had the same type of problem you had for months and had worked with HP but could never get
Web Services to work at my location with my Modem/Router.
Had tried at other locations and it would work with the old Firmware. But for some reason it did not at my
location with the Modem/Router I was using.
Again the latest Firmware fixed it. I tried all the other solutions that I had found on the internet and non of them worked.

Disable wireless broadcasting - HP laserjet pro 400 color mfp m475dw

How do I disable SSID broadcasting for HP laserjet pro 400 color mfp m475dw. I have turned off wireless configuration through printer web console, but it is still broadcasting. I have also updated the firmware to latest available 20131028.
This question was solved.
View Solution.

The information is in the manual. Did you download it and read it?
Go here.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/manualsResults/?sp4ts.oid=433754...
Page 28 Network options. Disable Wireless Direct.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP Laserjet Pro 400 Printer unable to print docs using both letter and legal paper

HELP!! Have been using an HP Laserjet Pro 400 M425dn dual tray printer for 2 years, along with a Dell laptop. Always had ability to send documents to print using both letter and legal size paper. Under print set-up on laptop, the option checked was always set to "Choose Paper Source by PDF Paper Size". Now I've just purchased an HP Envy All-in-One Desktop, which does not offer that option under Print Set-Up. While it allows for 'Auto Selection' of paper size, you are required to choose either letter or legal size paper. I've called tech support 3 times, the latest call earlier this am, only to be disconnected. Yesterday I was told that I should go on hp/support and update drivers. My husband downloaded drivers, but still no fix. Unless this issue is resolved asap, I will have no option but to return this Envy Desktop, as I cannot run my business without this option.
Anyone have a similar problem? How was it resolved?

The available options will (probably) be determined by the printer driver in use.
This , in turn, will be determined partly by which Operating System and version you are using.
Once a printer model has been out in the field for some time (generally when the next generation (or two?) of devices has been announced to supersede it) that model becomes a 'legacy' device, and 'full-specification' printer drivers may no longer be supplied by the printer manufacturer, but basic (i.e. without too many options) drivers will (probably) instead be supplied with the operating system.

Help! Accidently updated firmware of Laserjet pro 400 with Laserjet CP4525 firmware

Similar Messages

Maybe you are looking for