Help adding second Wi-Fi network on same AP

I am looking for assistance in trying to setup a second wireless network so we would have two SSID’s (one for public and one for private users).
Our network is setup with native VLAN1 for wired computers and VLAN107 for wireless computers and everything is working great. I’m trying to add VLAN110 as the additional wireless network.
We are using a Cisco WLC2112 and 12 Cisco LAP1131 access points for the wireless network.
The wired network us using Cisco 3500 series POE switches and a Cisco 1800 series router.
The ports on the switch that connect to the AP’s are configured as follows:
switchport access vlan 107
switchport mode access
spanning-tree portfast
I’m having trouble getting my head around how to setup the second wireless network on its own VLAN (VLAN110), while still using the existing access points. I have added the additional wireless network on the WLC2112, have setup a DHCP server for the new VLAN, but it’s getting an IP address from the same scope as VLAN107.
Where do I configure the new VLAN information on the wireless controller?
Should the ports on the switch that are connected to the AP’s be changed to trunk ports to accommodate both VLANs?
Thanks in advance for your assistance.

HI Mark,
1.You need to create a dynamic interface on WLC.
Controller>Interface> click on New, enter interface(e.g. private) and Vlan ID:110 and apply.
Interface >edit page will appears, then u can enter network , mask and DHCP server address...etc.
2. Now you need to create a WLAN.
WLAN> create New, enter profile name , ssid and Wlan ID here then clcik on apply WLAN>edit page will appear.
Staus should be enable
Choose the right dynamic interface , which we created in step 1.
Chosse specifiy Security and other feature.
3.Configure swicth port for vlan 107 , 110 where WLC is connected.
I hope AP are in same network as your Management interafce of WLC.
Regards

Similar Messages

  • Need help adding second laptop to network

    Please help.  I am so frustrated.  I setup our new gateway wirelessly using the WRT160N router.  Had to call the help line and they helped me go online and configure the router settings.  Now I am trying to add a second older laptop (HP Pavilion ZE4400).  When I use the disc to install the router info, it stops after it says waiting for the router.  Then I get an error message telling me to restore the router to it's default settings.  I don't want to undo all that I did with support on the phone.  It took forever.  Why can I not install the router software on the HP?  Can someone help me fix this problem?
    Thanks in advance

    If your router is already configured then,do not run the CD on the computer to connect the Wireless Network...Make sure that wi-fi switch is turn ON.
     For XP...Click on Start and goto the Control Panel and double click on Network Connections, Right click on the Wireless Network Connection and click on View Available Wireless Networks and select your Wireless Network and click Connect...Now it will give you the opportunity to put the network/wep key, make sure you enter the correct network key and confirm it...It will connect.
    For Vista...Click Start >> Control Panel >> Network and Sharing Center >>Click on Connect to a Network and select your Wireless Network and click Connect, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...It should connect...Once you are connected you should restart the computer, it should connect to Internet...

  • Need help adding PC to my network

    I have a POS Dell Dimension PC and I'd like to (at the very least) be able to have it and my Powerbook online at the same time. My Powerbook (and other Macs in the house) are connected wirelessly to our Cable Modem via an older Airport Extreme (Dome Shaped) base station. What are my options to hook the PC up to the network via Ethernet, as I don't believe there's a wireless card in it.

    Thank you. Turns out I didn't have the right drivers, but I was able to download them on my Mac, burn a CD and move them over. Now I just need to figure out how to access the PC over the network.

  • Problems adding second laptop to network

    Hi,
    I just bought a Linksys WRT54GS router and followed the setup instructions to get my first laptop up and running wirelessly.  I had to use the linksysfix.com site, but everything works great.  Now I want to add another laptop.  I go to the linksysfix.com site and run the easylink connect and select the option to add another computer.  It instructs me to connect the second laptop to the router using a second ethernet cable.  The trouble is, I have no internet connection through the cable.  Do I need to run the installation disk for the router on this computer too?  The second laptop will connect fine to a different LAN.

    You should also check your notebook's TCP settings.  It may have been set to manual parameters which may not be compatible with your WRT54GS.
    LINKSYS | WRT54G 1.0(R.I.P.) ; WRT54G 2.0/Thibor15c ; WRT54G 3.1 ; WPC54G 1.0 ; WMP54G 1.0 ; WM54G 1.0(mini PCI) ; SD208 1.1
    INTEL | PRO/Wireless 2200BG
    BUFFALO | WHR-HP-G54(125Mbps) ; WHR-G54S(125Mbps) ; WLI2-CB-G54L ; WLI-U2-KG54
    SMC | Barricade SMC7004VWBR

  • How to fix imessage error on ios8.1.2 .. Already reset network still same issue please help

    How to fix imessage error on ios8.1.2 .. Already reset network still same issue please help

    Hi ashmanryan36,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are having trouble with iMessage. It looks like you have already done some troubleshooting. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
    You did not mention what the error was but since you are running 8.1.2 and update is available and my help. 
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    Cheers,
    Mario

  • Help adding new WLC to existing ACS

    Hi All,
    I need help with this.
    This network has a working WLC that authenticates wireless users against an ACS by MAC address. It works fine.
    I need to add a new WLC.
    I added the WLC, the APs connect to the WLC fine, but the users get limited connectivity and we've found out that is because the new WLC is getting authentication errors against the ACS.
    The configuration of the new WLC is exactly the same as the current working WLC and both controllers show as AAA clients on the ACS.
    I want to know if somebody can point me out in the right direction to solve this.
    There's connectivity fine between all devices (as far as PING goes), and there's no Firewall or filters in between.
    The difference I see on both WLCs is that on the working one (WLC1), under Security - AP Policies, we see the AP Authorization List with the MAC addresses/cert type/hash.  We don't get this information on the non-working WLC (attached document shows both)
    Also in the attached document, I'm sending the errors I get no the WLC2 controller.
    Any help is greatly appreciated.
    Federico.

    Federico,
    I didn't get you when you say that you see only One WLC under groupsetup/Mac address. Could you please elaborate this?
    Also, if you don't know see any NAR configured under shared profile component then check inside the group/user setup there must be either ip based or CLI/DNIS based NAR configured for WLC's and looking at failed attempts it seem that action is denied.
    HTH
    Regds,
    JK
    Do rate helpful posts-

  • NEED HELP TO SET UP SMALL NETWORK - WIRELESS SIGNAL FROM NOVATEL U760 USB

    Hello -
    I need help setting up a small network in my new home in Florida, which has no wired broadband capability - not cable, not dsl. My options are satellite (which I'd like to avoid) or wireless broadband via Millenicom (or now Virgin Mobile) using their Novatel U760 USB stick.
    Here are the network components - someone please tell me how to set this up:
    PC #1 (has wireless card, but I've connected it by ethernet to the router)
    PC #2 (no wireless card; connected via ethernet to router)
    MACBOOK, 1 1/2 years old (2.1 GHz Intel Core 2 Duo, 4 gigs RAM), running OS 10.58, connected wirelessly to router.
    AIRPORT EXTREME BASE STATION, Model A1143.
    I'm not thrilled about using a wireless 3G signal as my primary one, (sprint network, claims 600 - 1400 kbps speed), but it costs 1/2 to 1/3 of what a slightly faster satellite signal would.
    I have not ordered this service yet. Before I do, I'd like a clear understanding that I can, in fact, set up my simple network, which I'd probably do the same as it's now configured with cable broadband - both PC's plug via
    ethernet into the Airport Extreme router, the MacBook connects wirelessly - AND,
    my question is this:
    Can I plug the wireless card - a Novatel U760 USB-stick device - straight into that USB slot in the Airport Extreme base station and will it automatically recognize that device?
    Or, do I have to plug it into the MacBook and somehow share that wireless signal between the 2 PC's (only 1 of which has a wireless card, so I'd have to get a card for PC #2)?
    And help anyone can provide will be much appreciated!
    Thanks,
    Em

    from the Airport FAQ #14:
    "Question: Can I connect my Soundsticks or other USB speakers to AirPort Express?
    Answer: No. The USB port is for connecting a printer, not for other devices."
    Im assuming other devices include USB modems.
    So, I would say your cheaper route would be to get a second wireless card and just share your internet connection from one of your PC.

  • Adding SG300 to exisiting network

    I am not an expert in the network field.
    About a year ago, I upgraded old network equipment with Cisco 2950 and 2960's to get some consistency in house.  
    We are about to switch over to a VOIP system, and we decided to replace all switches with Cisco Small Business SG300 POE to make like simpler, and hopefully faster.
    Problem is, we give it an IP address, rename the switch and have updated to the newest firmware.  We plug it in, and in seconds, it shuts down my network.  
    When I look at the log, we get a native VLAN mismatch, then Loopback error.
    Obviously I need some more basic configuration.  I assumed I would just be able to plug these in and swap similar to the way I upgraded my 2960's.
    Any help would be appreciated.

    Hi,
    SG300 series switches have all the default settings to simplify voice and data network implementation but...
    if you are adding to Cisco enterprise network there are several things which needs to be consider:
    1. PVST is not supported ad only common STP is MSTP
    2. VTP is not supported so all the trunks needs to be configured one by one manually
    3. when setting up access port for desktop+phone on SG300 port needs to be in trunk mode and data vlan set as native and auto-voice vlan enabled
    If you still have some problem we would really need to look at your topology and devices interaction in details and I would recommend you to open ticket with Cisco Small Business Support team:
    http://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
    Regards,
    Aleksandra

  • Help needed to communicate with networked printer

    I have a iMac G5 with Airport card. I am trying to communicate with an HP7660 printer attached to a WinXP machine with a USB cable. I can communicate bidirectionally fine with shared files between the Mac and the PC. I have turned on the file sharing on the printer itself. In the Mac, in System Preferences/Print & Fax, I set up the printer in the Printer Browser window with the following:
    Protocol: Line Printer Daemon - LPD
    Address: I used the IP address of the PC
    Queue: left blank
    Name: hp7660 (same as I gave it on the PC)
    Location: I used the IP address of the PC
    Print Using: Generic Postscript Printer (this was the default since this model was not shown in the printer list.
    In the Print & Fax, under Sharing, it shows the hp7660 checked.
    In Printer Setup, "Printer model" shows Generic Postscript Printer.
    In Printer Setup, "Name & Location" shows correct for both. The Queue is shown as hp7660 and the driver version is 10.4 (the Mac version).
    Now, when I open a Word file and click on "File/Print", the "Printer" is hp7660. When I click Print, I get an error message that says
    "Network host "IP address" is busy, down or unreachable; will retry in 30 seconds..."
    This same thing happens regardless of the Protocol option that I choose: Line Printer Daemon, Internet Printing Protocol, or HP Jet Direct.
    During this time, I get no error message on the PC and there is no other work going on at the PC. As I said, I can easily communicate between both machines, except for the printing.
    If all of the configuration settings are correct, does anyone have any ideas that I might have overlooked?
    Thanks
    Herschel

    Henry,
    Thanks for being so patient with my problem.
    When I follow the efelix directions for setting up the PC, it says that when you press the "Add" button on the Mac, a drop down menu will appear so that one can choose "Window Printing". This is not what happens for me. When I push the "Add" button, a "Printer Browser" window opens.
    This Printer Browser window (in the first box) gives me only 3 options: the LPD, IPP and Socket options. After manually entering the Address (IP address of PC), Name (same as shown on the PC), and Location (IP address of PC), the default in "Print Using" shows up as "Generic Postscript Printer". I then click on the "Print Using" using option to choose the HP Photosmart 7660 printer from the list rather than the Generic Postscript Printer.
    Now, when I click on "Add", the "Windows Printing/Workgroup" comes up in a Printer Browser window. It has only one item under the "Name" column which is my name and under the "Comment" column it had the Mac ID listed. I then choose "Network Neighborhood" as suggested in the efelix website. What appears now is a single choice called "WORKGROUP" under both the "Name" and "Comment" columns. I should have had 2 choices (as efelix shows), one being "WORKGROUP" and the other being a workgroup that contains my remote PC.
    This procedure, according the efelix procedure broke down at the very beginning when he suggests clicking on Add immediatly after setting up the PC. I did not get the drop down window he shows in order to choose "Windows Printing". Rather, this choice did not appear until I went through the configuration procedure of manually choosing the "HP Photosmart 760 Foomatic/hpijs" from the printer list. I don't know whether this may be due to a difference in Panther or Tiger (which I have), but the way I did it does not allow me to make the connection.
    So, in summary, it requires that I take a different path to get to the same conditions that efelix shows. Obviously, it is not getting the results needed. I sometimes wonder whether deleting the "hpijs" and 'ghostscript" and just using the HP upgrade might work? What do you think? Or is there some other way to get the "Add" window to give me the drop down window?
    I know this may be confusing, but I am trying to give you the step by step procedure that is happening.
    Thanks
    Herschel

  • Help adding Input language Russian on 8330

    I'm on Verizon Curve 4.3.
    Can anyone help adding Russian as input language?
    Thanks.
    Greg.
    Solved!
    Go to Solution.

    Verizon should have a multi launguage package on the website.
    If not you can go here:
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    Make sure you get the same version that is on your phone currently so you ca maintain support.
    Let us know when you get it, and well help you load it.
    Thanks
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Urgent Help Required for Unified wireless network help

    Dear Community
    i need urget help for a wireless unified network setup to deploy it in a college
    actually what is the senario for this network that i have a WLC 5500 and 12 lwapp 1252 series APs for this deployment ant there is allready an existing lan
    network to connect with it the new wireless unified setup.
    here is above proposed topology .
    i need help for this setup like
    i know the basic configuration on controller to do but i really do not know that from GUI what steps i need to configure on controller for each access points as you can see above i have three floors for building and i want to configur three SSIDs like Employ,contractors and Guest for each floor and how to configure encryption type and shared key for each SSiD.
    and what i have to configure for APs to join them with controller
    and hoe to configure RF grouping for each floor.
    please i need urgent reply because i have tp finish this all setup in one weekonly
    thans in advance.

    Hi,
    Wat ever you want.. the below link has everything.. Just click on the stuff that you neeed fro mthe menu and this will do it for you!!
    http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70.html
    1>> Configure WLANs.
    2>> Configure AP Grouping.
    Regards
    Surendra

  • How can install a second app icon  of the same on app on a different home screen?

    how can install a second app icon  of the same on app on a different home screen?
    for example i have the phot app on one home screen and the i want the same photo app showing on the other home screens?
    I want to have a duplicate app on on more than one home screen
    Another example if i have the Evernote app showing on my first home screen and then my last home screen as well

    Put it in the dock at the bottom. Apps put there stay there and show at the bottom of all home screens.

  • I started with one itunes account for my iphone and ipad, and now have a second ipad linked to the same itunes.  Can I set up a new itunes account for one ipad without losing what has already been downloaded on it?

    I started with one itunes account for my iphone and ipad, and now have a second ipad linked to the same itunes.  Can I set up a new itunes account for one ipad without losing what has already been downloaded on it?  I want to stop my husbands downloads appearing on my ipad, and vice versa.

    A much simpler solution would be to go into Settings > Store and turn off Automatic Downloads

  • Can I connect two apple tv on same network and same apple ID at a time ?

    Can I connect two apple tv on same network and same apple ID at a time ?

    Welcome to the  Discussion Forums.
    Yes you can do all that without needing to keep plugging things in and out. You will still need to manually turn on the receiver and turn down the volume from the tv though.

  • I need help adding a mouse motion listner to my game. PLEASE i need it for

    I need help adding a mouse motion listner to my game. PLEASE i need it for a grade.
    i have a basic game that shoots target how can use the motion listner so that paint objects (the aim) move with the mouse.
    i am able to shoot targets but it jus clicks to them ive been using this:
    public void mouse() {
    dotX = mouseX;
    dotY = mouseY;
    int d = Math.abs(dotX - (targetX + 60/2)) + Math.abs(dotY - (targetY + 60/2));
    if(d < 15) {
    score++;
    s1 = "" + score;
    else {
    score--;
    s1 = "" + score;
    and here's my cross hairs used for aiming
    //lines
    page.setStroke(new BasicStroke(1));
    page.setColor(Color.green);
    page.drawLine(dotX-10,dotY,dotX+10,dotY);
    page.drawLine(dotX,dotY-10,dotX,dotY+10);
    //cricle
    page.setColor(new Color(0,168,0,100));
    page.fillOval(dotX-10,dotY-10,20,20);
    please can some1 help me

    please can some1 help meNot when you triple post a question:
    http://forum.java.sun.com/thread.jspa?threadID=5244281
    http://forum.java.sun.com/thread.jspa?threadID=5244277

Maybe you are looking for