Help..!!!..administrator not able to log in at this time...!!!!!!!!!
hi...all of a sudden when i try with log in with my administrator account the "not able to log in at this time " message pops out...!!!::(((
1) i can log with my secondary user account.
2) i can change setting using my "usual" administrator password...
HOW CAN I LOG AGAIN ON MY MAIN ACCOUNT...!!!!!!
please help...
federico
That link recommends that you delete the troubled account and recreate it, then restore your files from a backup. If you don't have a backup, then your files are lost.
I'll see if I can get some more knowledgeable people here to help, but you may be out of luck.
Similar Messages
-
tried to upgrade my iPhone 3GS to a higher iOS but unfortunately it had reset factory setting... now i can't use my phone anymore... tried also to connect to iTunes as instructed but only appears: WE ARE SORRY, WE CANNOT CONTINUE YOUR ACTIVATION AT THIS TIME... WHAT SHOULD I DO? THANK YOU...
No, you do not need to nor should you jailbreak your iPhone.
If you jailbreak your iPhone, you void any remaining warranty and lose
all support from Apple including this forum.
4 possible causes to activation server unavailable message:
1] activation server is actually unavailable. Happens very rarely and
does not last long on those rare occasions. Solution is to try again.
2] your firewall/internet security software/antivirus are preventing connection
to the activation server. Solution is to temporarily turn off your firewall/internet
security software/antivirun until you have activated your iPhone.
3] your iPhone has been jailbroken or otherwise hacked/modified.
4] the computer you are using to activate the iPhone has been used to
jailbreak an iOS device.
For causes 3] & 4] you are on your own as Terms of Use for this forum prohibit
discussion of jailbroken/modified iOS devices. Google may provide some direction.
Be advised that jailbreaking/hacking your iPhone may prevent the iPhone from
being able to be activated. -
I know that this has been beaten to a pulp, but having issues myself and have not been able to find an answer.
Hard drive failure in my server, so re-installed and updated everything to 10.7.5 without any issues, 1000+ users recreated. Sharepoints setup and thought that I would be good to go. Users go to log in and get the "You are not able to log in at this time" error.
So I would think that it was my sharepoint and permissions, because if I create a user and map his home directory to the default location, I have no issues. What I don't understand, if I log into the computer as the local admin, connect to my server and use a users login, I am able to connect to their home folder without any issue.
This one has me baffled, as I am sure that the permissions are correct on the share, just not sure why it will not map. Any help would be greatly appreciated.Just as a side not and not sure if this is the issue or not. The SSD is where the main OS is, and I have three 2TB drives in Raid for storage of my "Users" home folders. Now, I have bad battery and one on order, could this be the cause of my issues.
Thanks -
please can anyone help me to download some apps for my iphone .. i am simply not able to log in to the itunes store , when i enter my apple id it says that it has not yet been used with the itunes store
Ok, you should generally only get this when you are converting your ID to an iTS account for the first time.
Sign into iTunes with your Apple ID and you should get this.... IRC once you agree or accept it's now an iTS account and you wont get that again. -
am not able to log in to my user account after installation of OSXLion,have called up the support centre many times,but was left in vain ...i belief its a simple problem ,but why is apple support center not able to help me out ...have given them all the required information with respect to everything...somebody plz help me to log in as am not able to access my docs and do any work...
My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call
This is entirely a carrier issue. If your carrier (airtel) doesn't provide service outside of Mumbia, this has nothing to do with your iPhone.
i feel i need to change my brand
This is a user-to-user tech support forum, not Apple. No one here cares at all about your threats.
NEVER post personal info in this public forum -
Hi All,
In Entrprise Portal if an End user is not able to log in with his user id or his login is failed , then as a Portal Administrator what we need to check or can anybody tell me where the problem might be .
Thanks a lot .Hi Jain,
As they said above, first check the user ID in UME. If the user exists, check if it is locked.
To unlock the user , select the user and click on unlock tab. a message "object unlocked successfully" will display.
To reset the password for the particular user,
1) goto user administration --> identity management --> search for the user ID --> click on the Id which is displayed below.
2) click on modify tab
3) select define initial password button and type password in define password & confirm password fields
4) save the changes
hope this helps you. pls reward points if it is helpful
regards,
vv. -
Not able to log-on workspace/shared services after new inst thru index.jsp
Dear Specialist Team,
I m Kalyan, new to HFM product installation. I have completed successful EPM installation with the help of user guides from Oracle.
Installed on my local machine, able to work on Planning / Essbase Admin server, but not able to log-on to workspace and shared services on the local host link.
Checked many things like Services running properly, Diagnostics report. All are positive. Using IIS 7.
I m able to see this link "*http://localhost:9000/workspace*/", when I click on the Launch Application a blank window gets opened on Popup and nothing is visible it says loading for long time on this link "*localhost:9000/workspace/index.jsp*".
Tried using different browsers, but unlucky. Is there anything I m missing with java or browser or something else?
Please help me to sort this, so that I can log-on and proceed with application usage.
Regards,
KalyanJohn's support document related to the browser settings is the best, however if you do not have access to support document or are using Firefox you can try installing an add on found at -->
https://addons.mozilla.org/en-US/firefox/addon/remote-xul-manager/
and restart Firefox...
Once the browser is restarted..you can find the add on at Firefox --> Web Developer --> Remote XUL Manager
Add the URL, that you are using to access workspace and try to load it. If everything is good, you should be able to see workspace/shared service page.
Thanks.
hyperionEPM
Please mark answers as helpful or correct for others to find them easily -
I am not able to log in to ePrint
I am not able to log in to ePrint, after entering the username and password a new window pops out, advising to click on HP Connected. After clicking on the button I get error 404, web page not found.
Also not of the 5 apps that are installed on the printer not working, selecting them I see apps updating .... please wait and then cancelling.
Anybody can help ?
Thank you
This question was solved.
View Solution.Hi hp323,
Welcome to the HP Support forums. I understand that you are unable to get the apps to work on your Photosmart 7520 series printer and that you are unable to log into HP Connected.
HP Connected has only been rolled out to the USA and the UK. Please try logging into HP's ePrintCenter with a country other than the USA or UK as the your country choice (this can be chosen in the lower left hand corner of the screen, please see the screen shot below). That will stop the redirection to HP Connected. What is occurring is you are trying to log into the USA/UK ePrintCenter which automatically redirects. The redirect is using the country from the computer and is trying to redirect to the HP Connected for your country and it fails as there is not an HP Connected for your country.
As for the apps, HP is aware of the issue and is working on a solution. It is recommended that you have your product updates set to automatic on the front panel of the printer in order to be able to receive the update when it becomes available. If you wish to discuss this with a phone support agent, please call HP's Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside of the USA/Canada region please click the link below to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
I'm not able to log in as J2EE_ADMIN through the Web Browser.
If I try to log into the server using http://<server>:50000/ I get the SAP Nteweaver SAP Web Application screen. I click on System Information, I get prompted for the username and password. I enter the username J2EE_ADMIN and then the password, but it keep asking for the username and password until I get the 401 unauthorized screen. I can log into Visual Administrator using the J2EE_ADMIN and the same password with no problems.
I activated the sap* account, but the same thing is happenning, I'm not able to log in as sap*!
Any suggestions or tips?In the Security Provider Service choose Runtime --> Policy Configurations -->Authentication tab, please check whether you have the below settings correctly, if not set as below.
Login Modules Flag
EvaluateTicketLoginModule SUFFICIENT
BasicPasswordLoginModule REQUISITE
CreateTicketLoginModule OPTIONAL
Thank you,
Shyam -
Not able to Log on to Central Management Console
Hello All
My Application was down, so I shutdown the servers and web Servlet container(tomcat).
Then i restarted the servers and web Servlet container.
I am still not able to log into CMC.
I am getting the login page, but when I try to login it says :
"The system servername can be contacted, but there is no Central Management Server running at port 6400."
When I ran the script for server start up,I got the message
Failed to register with name server. Reason: a server of this name already exists.
Please check for name duplication and validness of the server: ConnectionServer
Please help.
Thanks in advanceI hope you are working on a Unix server. If yes here is ur solution.
Check if under bobj/serverpids folder any listing is there. If yes then probably the BO are not stopped properly.
In that case u can kill the processes which are not stopped by using Kill -9 <pid>.
make sure that all processes that is BO services, tomcat services are stopped or the process are killed.
Once that is done restart the services and everything will be working fine.
Gud Luck!!!
Prashant -
Dear Gurus,
We are not able to log in the portal since morning. it does not respond to the log in when i go to irj/portal .. administrator user as well as other users not able to log in portal. It doesn't throw any error message just it stands there. tried to restart the EP also but no luck.
Kindly suggest.Hi,
Did u changed anything in Kestoke Administrator under Visual Administrator.
Check the log files what error its showing.
Regards
Deb -
I am not able to log-in to web sites (banking, g-mail, etc.)
Using firefox, I am not able to log in to accounts that I have had access to for years. I have been using Firefox for a few years with no problem up until recently. I've tried deleting cookies and history but I am not able to log into an account once I lose it. (as long as I have an account open, there is no problem
Hi hp323,
Welcome to the HP Support forums. I understand that you are unable to get the apps to work on your Photosmart 7520 series printer and that you are unable to log into HP Connected.
HP Connected has only been rolled out to the USA and the UK. Please try logging into HP's ePrintCenter with a country other than the USA or UK as the your country choice (this can be chosen in the lower left hand corner of the screen, please see the screen shot below). That will stop the redirection to HP Connected. What is occurring is you are trying to log into the USA/UK ePrintCenter which automatically redirects. The redirect is using the country from the computer and is trying to redirect to the HP Connected for your country and it fails as there is not an HP Connected for your country.
As for the apps, HP is aware of the issue and is working on a solution. It is recommended that you have your product updates set to automatic on the front panel of the printer in order to be able to receive the update when it becomes available. If you wish to discuss this with a phone support agent, please call HP's Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside of the USA/Canada region please click the link below to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
NSS3000 Not able to log in to the NAS management
Hi,
Somehow I am not able to login as admin on the NAS management interface.
I tried all my possible admin passwords but no one is letting me in. This is odd!
I tried to reset the network settings to default, but then the hostname changed to default and as a result I lost all the filesharing. My files are trapped inside the box.
So what can I do about this without loosing files?
Thanks for any advice!The backup builds up a file to about 260 GB and then it starts to build up the file again and again. This process is taking many days! Finally it stops when the file is about 30-60 GB. So it seems that there is a problem with the scheduled backup as well.
When I open the backup the ".config" folder is present. Inside the folder there are 4 files:
- exports
- ftp_shares
- smb.conf
- version
I assume this is my original configuration.
If I look at a one year old backup these files are completly the same. No changes.
Today I removed all 4 discs from the box and then I tried a network reset and a box reset. I am still not able to log in to the web admin interface. I am trying to log in with the default username "admin" and the default password "admin". But the browser is not letting me to log in. I have tried to log in via the Internet Explorer, Google Chrome and with the Mozilla Firefox. All with the same results. Internet Explorer let me try to log in only 3 times before it throws me a log in fault message. The two other browsers let me try to log in as many times as I want.
Then I tried to FTP the box with success. The default admin username and password has been reset for the FTP service. This is really strange! But of course no files available.
Is there a jumper inside the box or a procedure that can do a complete reset of the box?
Or is it someone that would like to sell me a used box that is working so I can recover my files?
I tried to call the CISCO small business support phone but they just telling me that this product is end of life and they refuse to help me. I asked them if I can buy a service agreement for this box but CISCO is refusing to offer like this support. I am really dissappointed of the support that CISCO is giving in this case!
Any suggestion or help is very appreciated! -
Can not able to log in into sys as sysdba
Hi all,
I have one instance name is skydb and once upon a time i used it when i created it.i did set one password for the sys user and created password file.but right now i have forgot the password of sys.again creating the password file using below command.
orapwd file=orapwdskydb password=oracle entries=10but can not able to log in into sys as sysdba using this 'oracle' password .
for your information now the database is down.we also need to up it.
please help.
thanks a lot in advance.
atanuHi All,
first of all thaks a lot for your promt reply.now for your information my os info is
Linux oracleDB11g 2.6.32-71.el6.i686 #1 SMP Fri Nov 12 04:17:17 GMT 2010 i686 i686 i386 GNU/Linuxmy account user is in DBA group and its confirm.
now am giving the output of the
each command
[oracle@oracleDB11g admin]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Wed Jan 23 11:04:25 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges and
[oracle@oracleDB11g admin]$ sqlplus /nolog
SQL*Plus: Release 11.2.0.1.0 Production on Wed Jan 23 11:05:59 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> connect / as sysdba
ERROR:
ORA-01031: insufficient privilegesalso want to tell you I have created that password file on location is
/oracle/app/oracle/product/11.2.0/dbhome_1/dbsthanks once again
atanu -
Not able to log into Verizon Cloud on Galaxy Note Pro 12.2
Not able to log into Verizon Cloud getting a message that my phone number has changed and that I should factory data reset the device and then restart to setup my cloud account. I have not changed numbers and don't want to factory data reset.
Any Ideas?
ThanksThat is really odd, ThePathfinder. I too would be a bit weary of doing that, but the factory reset isn't as bad as it used to be. Let's try this step first before even considering that route. If you go to Settings > App Manager > All Verizon Cloud > Can you clear the apps cache and data, and possibly uninstall any updates for it? This may be enough to clear past info stored for the app, and may allow you to sign in with no issues.
NicandroN_VZW
Follow us on twitter @VZWSupport
Maybe you are looking for
-
How do I remove my visa details from itunes
How do I remove my visa details from itunes
-
MIRO--CENVAT CLEARING ACCT NOT APPEARING.
Hi All, In PO ,we are maintaining only JIPC ( cst ) for a tax code, But while GR we are capturing excise( cenavtable), now while doing MIRO cenvat clearing acct is not appearing when we simulate. Is it prerequisit to maintain excise condition in PO s
-
High-quality files on PC and smaller files on iPod
I want to maintain CD quality files on my PC and have lower quality files on my iPod and my girlfriends iPod nano in order to be able to carry around more music, etc. I would like to continue using iTunes as we are already both familiar with its layo
-
Update to Supplementary Editing Application in Photoshop Elements 12
How do I update the Supplementary Editing Application in Elements 12 to Perfect Photo Suite 8 from Suite 7?
-
My microphone is not working on the sound test or on skype HPPaviliondv7notebookPC with Windows 7
My microphone is not working on sound check and when I try skype. I am using HPPaviliondv7notebookPC