Help! Adobe CS4 won't run after upgrading to ML

After installing ML on my iMac, my Adobe CS4 software either won't open or runs very, very slow. I know CS4 is supposed to be compatible with ML, but I never had this issue before. Any suggestions before I have to spend $700 to upgrade my CS?

Kurt - thank you. That is the first thing that has made sense - perhaps my OS upgrade didn't go well because I already had some kind of OS damage. If it was just one of my CS programs, I could see how it might be my software but when it's all of them and when I upgraded, suddenly my entire computer slowed down. I had to upgrade my memory but perhaps there is an underlying problem. I may try going back to Apple to see if they have suggestions.
Thanks all.

Similar Messages

  • Adobe OnLocation won't run after updating to Mavericks

    I use Adobe OnLocation, the reason I bought a Mac, and after upgrading to Mavericks the system hangs everytime I start OnLocation.  I have reinstalled the program numerous times.  After a visit to the "Genius Bar" I decided to wipe the drive clean and reinstall the OS.  Unfortunately Apple make no provision to revert to Mountain Lion.  Does anyone else have this problem?  How can I get Mountain Lion back on my machine?
    Dennis

    Hello martelloeugene,
    Welcome to the HP Forums.
    I see that you are having some scanning issues since you upgraded the operating system on the Mac.
    Seeing the HP does have a full feature software and driver bundle for this particular operating system, I suggest that we start from scratch.
    If you have the usb cable connected to the printer and the Mac, please remove it from both ends and leave it disconnected until further notice.
    The first link I have for you gives instruction's on How to reset the printing system.  Once we have the first step done, click on the next link for instructions on how to Repair disk permissions.
    The last link I have for you is the HP Printer Drivers v3.0 for OS X.  You will be given instructions on when to connect the usb cable.
    If you are still having issues with scanning, I suggest then checking for apple updates as well as using the apple software for scanning.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Photoshop CS3 won't run after upgrade to leopard

    after installed leopard 10.5 i can't run PS CS3.. it said "could not initialized photoshop bcause the file is locked. Use the "get info" command to unlocked the file".
    And then i use the get info command but i found that the photoshop CS3 was not locked...
    Anyone have the same problems?? please help me.....................

    Captain Lou wrote:
    yo I am having the same problems, any new suggestions on how to get photoshop to work. I have tried everything.
    Capt. Lou, welcome to discussions. However, you need to be a little more clear.
    When you say everything, what everythings have you tried?
    What I have done:
    Reinstalled CS3
    Repair Permissions
    Boot into Disk Warrior and Repair Disk
    Boot into Leopard disk and run Disk Repair
    What I have not done:
    Archive and reinstall operating system: Leopard
    Remove 3rd Party Ram
    Issues I am having besides CS3 not opening:
    Missing PDF tab on Print Dialog
    Computer won't go into sleep mode
    Mail won't remember junk email
    I don't have any of these problems on my MBP. Go figure.
    Narvon

  • Itunes won't run after upgrade

    I upgraded to the latest iTunes (10.6), but when I click on the icon I get an error message that says it can't open my iTunes library because it was created by a newer version of iTunes. How is that even possible if I just upgraded?
    Now I can't get it to open at all, even after uninstalling/installing and restarting several times.
    Please help!

    When I install the latest iTunes it will not run the application even though the process is running.
    I'm more familiar with trying to fix this sort of thing on XP, rather than 7 (or even Vista), but there's a few basic things we should check on.
    Reboot the PC (to kill your running iTunes.exe process as naturally as possible). Now head into your firewall, and check the rules. Is iTunes being allowed full access to the Internet? If not amend the rule. If it is, try deleting the existing rule and creating a new one (allowing full access to the internet) for iTunes.
    Having done that, reboot the PC and try launching iTunes again. Any better luck this time?

  • Iphoto won't run after upgrade

    I have just upgraded my PB G4 to MAC OS X TIGER 10.4.3 and also installed the iLife '05 in the computer. Unfortunatelly when i try to start iphoto nothing happens! The open window blinks and that's all.
    I have already upgraded software at apple.com, but it is still not runing.
    Can someone help me? I am an apple beginer and suffering to have things running.
    Thanks.
    Beatriz
    Powerbook G4   Mac OS X (10.4.3)  

    Hi Beatriz,
    Did you use iPhoto before the upgrade and do you have an iPhoto Library folder that your images are in?
    Lori

  • After Effects won't run after upgrading to Yosemite

    Hi there,
    My After Effects CS6 ill not launch in my other user accounts since I've upgraded to Yosemite. I have installed the plugin/update that was released and it works in the Administrator account, however, not on the others. Even when I go into the accounts themselves and install it and restart, I have the same problem. This is a lab for students so I cannot delete the accounts and start over as they all have work on these accounts. How can I resolve this problem?

    It may be a permissions issue. That's usually the case with an upgrade with Mac OSX (especially since the administrator account works). fixing permissions problem that impedes start of Adobe applications |

  • ITunes won't run after upgrade in W764bit

    I have an HP Pavilion desktop with E5200 cpu and 5G Ram. I upgraded to Windows 7 Home Premium from Vista. I did not deauthorize my computer in iTunes before uninstalling it prior to the Windows upgrade. When I install the latest iTunes it will not run the application even though the process is running. I have uninstalled and reinstalled a number of times with no results. My account is the Administrator account on the computer.
    Any suggestions or anyone else experiencing the same problem?

    When I install the latest iTunes it will not run the application even though the process is running.
    I'm more familiar with trying to fix this sort of thing on XP, rather than 7 (or even Vista), but there's a few basic things we should check on.
    Reboot the PC (to kill your running iTunes.exe process as naturally as possible). Now head into your firewall, and check the rules. Is iTunes being allowed full access to the Internet? If not amend the rule. If it is, try deleting the existing rule and creating a new one (allowing full access to the internet) for iTunes.
    Having done that, reboot the PC and try launching iTunes again. Any better luck this time?

  • Help!  iTunes won't run after 7.3.1 installation

    This is a first for me... I've never had a problem with iTunes.
    I did the upgrade/ update and now I can't open iTunes.
    I get the following message: "iTunes cannot run because it has detected a problem with your audio configuration.
    I tried to uninstall iTunes and reinstall it... no dice.
    Anyone got a way around this one?
    Thanks!
    Scott Dakers

    Hi Scott,
    Since iTunes uses QuickTime to play audio/video content in iTunes, that error message most likely indicates that there's a problem with your Quicktime installation.
    See this knowledge base article for troubleshooting info about this issue:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem
    -Kylene

  • AE CS6 won't run after the Mavericks 10.9.3 update

    My AE CS6 won't run after the Mavericks 10.9.3 update the other day. I was prompted that the current version of my AE was 11.0, so I searched and found the seemingly most up-to-date here: Adobe - After Effects : For Macintosh : Adobe After Effects CS6 11.0.4 Update : Thank You
    My question is this: since I'm new to Mac, should I download the update and install it to my existing instance of AE and it will allow AE CS6 to run as normal? And the way to install the update is simply to double-click the .dmg?
    Thanks!

    Instructions for installing the update are on the download page here:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5696

  • Iphoto 8.1.2 won't open after upgrade to 10.8.2?

    iphoto 8.1.2 won't open after upgrade to 10.8.2.  I have tried to upgrade iphoto to 9.1 but it won't work.

    To upgrade to iPhoto '11 (version 9.x.x) you musdt purchase the upgrade in the App store - that is not a free update.
    what happens? What error messages do you get? if it crashes post the first 50 lines of the crash report
    LN

  • My Adobe Bridge won't run because power pc isn't supported any more, is there away to still get it to run?

    I have a 2010 mac book pro, software os x 10.9.5 and my adobe bridge won't run any more because power pc isn't used with this os x update is there any way to still use adobe bridge. My adobe bridge was part of a creative suite 6 package that I purchased in 2012.

    I have a 2010 mac book pro, software os x 10.9.5 and my adobe bridge won't run any more because power pc isn't used with this os x update is there any way to still use adobe bridge. My adobe bridge was part of a creative suite 6 package that I purchased in 2012.

  • IPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?

    Had to upgrade according to screen.  iPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?
    I have restarted the computer. Brand new iMac intel. v 10.9.4

    You need to upgrade iPhoto for Mavericks. Download the upgrade using App Store.

  • Itunes won't work after upgrading to Mac os x 10.7

    How can i fix itunes, it won't open after upgrading to Mac OX lion??

    Downloaded and reinstalled. Still crashed instantly after trying to open or create a document. Below, from Crash Report:
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000044
    Crashed Thread: 7
    Thread 7 crashed with X86 Thread State (32-bit):
    eax: 0xb0427d48 ebx: 0xb0427c38 ecx: 0xb0427b38 edx: 0xb0427b3c
    edi: 0x00000009 esi: 0x00000000 ebp: 0xb0427b18 esp: 0xb0427ae0
    ss: 0x0000001f efl: 0x00010283 eip: 0x94bc9f4b cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
    cr2: 0x00000044
    Will attempt your suggestion.

  • Itunes won't run after download

    itunes won't run after download. simply asks to acknowledge agreement which I did. help

    You appear to be able to backup your contacts without iTunes.  Google "backup iphone contacts without itunes".
    The way to avoid having to get a tech person in is to get past the idea that your problem (which you still haven't defined) is "beyond my ability to fix".  ;-)

  • Old emails won't load after upgrade to Mountain Lion

    old emails won't load after upgrade to Mountain Lion

    See if anything in here will fix it:
    1. Hold down the Command and Option keys as you click the iPhoto icon.
    The Photo Library First Aid window opens:

Maybe you are looking for

  • Looking for driver updates for canon 1133iF printer for 10.9

    before I upgraded to Maverick I had no problem printing on the company wirless printer Canon 1133if all in one. Does anyone know of any new drivers / updates that can solve this issue? thanks, R

  • Loose track of invoice to credit once changed to "service"

    Please explain, this is a question from a customer, this is not the first time we have been asked this, do you have a solutionl. when you would like to create a "AR credit memo" as a "copy to or from" but it is damaged and should not affect inventory

  • System not booting, getting "unable to qualify my own domain name"

    Hi, System name : sun ultra 24 version : solaris 10 I am not able to login to the system. System is not booting completely. Getting below error at the boot time. sendmail (354) : My unqualified host name (india) unknown ; sleeping for retry sendmail

  • Using Wildcard characters in tables in S_TABU_DIS

    Hi,    I wanted to know if there is any way to assign authorization groups in se54 to a wide range of tables with similar namespace? Example: SAP is generating tables in one transaction which all starts with /BIC/APR000 - /BIC/APR999 The three number

  • Charasteristic of report painter

    I have a report painter with a 'account number' as a charasteritic value. The problem is that when I list the report the system shows in the description the account number twice for example 650000 650000, and I need that it shows the number plus the