HELP! Adobe PS Editor has stopped working

I just installed Adobe PS Elements 7 and I immediately get the following message when trying to edit , organize photos: Adobe PS Editor has stopped working. I have tried a few things I noticed on web but nothing has worked :(

Heather,
Unfortunately, there are many reasons why the PSE Editor might crash, and often it is hard to diagnose quickly the reason for the crash. I recommend the following troubleshooting steps:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Editor_ crashes

Similar Messages

*HELP* Adobe Flash Player Has Stopped Working

Problem signature:
Problem Event Name:    APPCRASH
Application Name:    install_flashplayer11x32_mssd_aih(1).exe
Application Version:    3.3.3.0
Application Timestamp:    5010882b
Fault Module Name:    setueout.dll
Fault Module Version:    3.0.2.0
Fault Module Timestamp:    5058e043
Exception Code:    c0000005
Exception Offset:    0000780f
OS Version:    6.1.7600.2.0.0.256.1
Locale ID:    1033
Additional Information 1:    d87f
Additional Information 2:    d87f106aaddbb918f9435119535c31be
Additional Information 3:    de48
Additional Information 4:    de483c87c736ac9abe1e617853f81924
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
COMPUTER SPECS:
System Information
Time of this report: 9/25/2012, 20:40:34
       Machine name: KYLE-PC
   Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
           Language: English (Regional Setting: English)
System Manufacturer: Gigabyte Technology Co., Ltd.
       System Model: Z68X-UD3H-B3
               BIOS: Award Modular BIOS v6.00PG
          Processor: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (8 CPUs), ~3.7GHz
             Memory: 8192MB RAM
Available OS Memory: 8110MB RAM
          Page File: 2745MB used, 13470MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
     DxDiag Version: 6.01.7600.16385 32bit Unicode

Thank you for the report. Does this occur each time you try and run the installer? Can you try the appropriate installer located here?
http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header

Adobe Photoshop CS3 has stopped working... HELP?

Everytime I try to make a GIF, and I select the length of the video, and press okay, a box comes out saying: Adobe Photoshop CS3 has stopped working. I've tried the "CTRL-ALT-SHIFT," but it doesn't work! Please help? ):
I make a GIF like this: File-Import-Video Frames to Layers.
Oh, and I have a Adobe Photoshop CS3 Extended.

You'll probably going to have to uninstall, then re-install the application; but you need to provide a lot more information;
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

My elements 7 editor has stopped working...Help

When i open my program it says " adobe photoshop elements editor has stopped working " and it closes but i will let me uses my organizer. What do i do

Check out http://bit.ly/HotmC7 and see if it's helpful

Adobe flash player has stopped working how to rectify please help

adobe flash player has stopped working how to rectify please help

Can you please tell us your operating system and browser version? In addition, please try going to this page to see if Flash Player loads and reports its version.
http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html

I am using Elements 13 and photoshop editor has stopped working can you help

I am using Elements 13 and photoshop editor has stopped working can you help

hi Andaleeb sorry to hijack Stephanie's thread!
I don't get any crash reports, it starts to open then just stops, nothing happens. ive tried getting in through the organiser but that doesn't work either.
I think my laptop is Windows 8 (its a fairly new laptop, does that sound about right?)
it was working Saturday I'm quite new to using it so no real workflow, just playing around with effects. ive only had it about a month
Thanks
Natalie

"Photoshop Elements Editor has stopped working"...message

I am very very very new to this...and have had so much trouble I'm ready to ask for a refund! After installing and watching tutorials and not being able to load any pictures to the 'organizer'...(my autoplay does not show the "Organize and Edit Photos" or show the Photo Downloader...I finally called Customer Service. He told me I needed to uninstal and reinstall. Ok..I've done that. But it's still not on Autoplay. At least he showed me where the file menu is on the 'organizer', so I could get some pictures in there. But when I click on 'Edit Photos', I get the pop-up message, "Photoshop Elements Editor has stopped working"....It never HAS worked....This thing just came out of the box today and has too many problems for a newby like me. What is the problem? Actually, there are the two problems. HELP!

On the drive on which you have installed PSE,on my machine it is on C:
Go to c:\Program Files\Adobe\Photoshop Elements 9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works. Let me know if you have any comments.
Thanks
Garry

Photoshop elements 12 editor has stopped working.

This is the error message I get. Photoshop elements 12 editor has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
The programme opens and then crashes. I took it all off my computer and then reloaded it again but have the same message. If anyone can help I would be grateful.@

Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 12\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.

Elements (Editor) has stopped working...

Hello all,
I installed Adobe Photoshop Elements 6.0 on my Windows Vista Dell Inspiron 1525 laptop last month and everything worked fine. Then suddenly, when I tried to open it today, the following error shows up:
Adobe Photoshop Elements 6.0 (Editor) has stopped working.
I have scanned through the forums and have only noticed people complaining about the 'Organizer' not working. Has anyone seen this error?? Elements does not even start anymore. Right when double-click on the icon, a window pops up with the error above. Anyone have any ideas?? Any help would be greatly appreciated. Thanks...
Sam

have you ALSO had trouble with your printer/scanner/other device?
i had the same problem, not knowing they were related til my friend showed me this:
http://kb2.adobe.com/cps/408/kb408846.html
hope it helps you too!

Editor has stopped working error

Upon opening my Adobe Photoshop 11 the programs error says "Editor has stopped working" closing the program. I really need my editor, can someone help
me?

You need to provide exact system info and the details of the crash:
Working with your Operating System’s Tools
Mylenium

Photoshops elements 13 trial version not working, Keeps telling the editor has stopped working

Downloaded & installed PS elements 13. when I try to start it up a box tells me the editor has stopped working and gives this in problem details:
Problem Event Name:    APPCRASH
Application Name:    PhotoshopElementsEditor.exe
Application Version:    13.0.0.0
Application Timestamp:    54024871
Fault Module Name:    libcef.dll
Fault Module Version:    3.1750.1738.0
Fault Module Timestamp:    539860dd
Exception Code:    c000001d
Exception Offset:    00000000020f3553
OS Version:    6.1.7600.2.0.0.768.3
Locale ID:    2057
Additional Information 1:    1849
Additional Information 2:    1849c65267ce2967d89f315e1c3c4b82
Additional Information 3:    4bd2
Additional Information 4:    4bd2aa1900d8927bd0f22b0bbfeb6f46
Never used PS before not sure if I need any other PS programs

Hi Charles,
Sorry for the inconvenience caused.
Please refer to this KB article:
https://helpx.adobe.com/photoshop-elements/kb/elements-13-crash-windows-7-crt.html
and see if it helps.
Thanks,
Anwesha

Adobe Bridge CS6 has stopped working - has issue been resolved?

Hello.
I am experiencing the above problem with a new install of CS6.
Has this issue been resolved?
CS6 Design and Web Premium installed on Win 7 pro 64 bit Dell Precision laptop. Error with Adobe Bridge cs6: "Adobe Bridge CS6 has stopped working", problem event name "APPCRASH". Error occurs when opening Bridge from Photoshop and other apps (Browse in Bridge) and directly from desktop or start menu. Also a cache directory is not being created under c:\user\<user>\appdata\roaming\adobe\bridge\. Holding ctrl key down and double clicking icon gets same message, cannot get at reset window.
Performed the following with no change: verified Bridge and full suite is on latest version (Bridge=5.0.2.4); created desktop icon directly from bridge.exe; verified application was installed and is starting with administrator privileges; verified latest display driver installed; performed complete uninstall of CS6, CC cleaner tool run, then full reinstall; Error under Event Viewer: faulting application: Bridge.exe and faulting module name: ntdll.dll; disabled UAC; tested memory for damage using MemTest86-good.
Thanks for any help you can provide.

A follow up to the above.
There appears to be a number of possible causes for this type of error. In my case it was somewhat specific. I had a stand alone copy on this same machine previously of Adobe Photoshop CS2 (only) which was completely uninstalled prior to the installation of CS6. There is an issue with Bridge CS6 being installed on a machine that has Bridge CS2 on it. I wasn't aware of Bridge being present with my copy of Photoshop CS2 but apparently there were at least some components of Bridge CS2 left after the uninstall. The workaround that solved the issue for me was the creation of an empty folder:
C:\Users\[your user name]\AppData\Roaming\Adobe\Bridge CS2
For those of you who may have this situation.
Here is where I found the solution (sixth thread down):
Bridge CS6 won't open running on Win7

Adobe Photoshop CS4 has Stopped Working on Windows 7

Hey guys and girls. I recently got a new computer running Windows 7 64bit. I still have good ol photoshop cs4 and wanted to use it on this new computer. The install process was completed and as I started the program, I get the "Adobe Photoshop CS4 has stopped working" box. I've looked through some forums, and a lot of them mention the wacom tablet issue, which is not the issue since I've yet to install the drivers for my tablet. Has anyone come across this problem at all? This is what shows up when I get that error box.
C:\Users\Administrator\AppData\Local\Temp\WERCA9F.tmp.WERInternalMetadata.xml
C:\Users\Administrator\AppData\Local\Temp\WERE1B8.tmp.appcompat.txt
C:\Users\Administrator\AppData\Local\Temp\WERE246.tmp.mdmp
Please help, thanks in advance

The first thing that I would do is insure that you have the latest video driver installed (but do keep any older ones, just in case you must roll-back - newest is not always the best).
If that does not help, then open Even Viewer, and check for all warning, or error messages in System and Application tabs, for the time that PS crashed. If you find any with links, follow those links - be patient, as some might take a few moments to send data to MS, and then for MS to process it, to open the proper page for that link plus the data gathered. This ARTICLE goes into a bit more detail, and I do not think that it is too Adobe Premiere-centric.
Good luck,
Hunt

Keep Getting Adobe RoboHelp 9 has stopped working Message

I am running on Windows 7 Professional, SP1, 4GB RAM, 64-bit OS, with Administrative privileges using Adobe RoboHelp version 9.0.1.232. I am creating projects on my C drive and linking them to Word 2010 docx files that are on the network then generating them as AIR files for testing purposes at this point. Each linked document is a technical manual (with a TOC and index) having anywhere between 100 and 1000 pages. The plan is to create a project for each of the 20 manuals then link them together and generate a Master Project as an AIR file to distribute to our customers. The manuals contain flowcharts, bullets, numbered lists, images, tables, hyperlinks, etc with approximately 100 custom styles defined in one Normal.dotm file. Only defined styles are used in each of the manuals and all manuals use the same Normal.dotm file. Each custom style is linked to a corresponding style in a custom RoboHelp css file used by all RH projects.
I have a default project that is used to create each separate project which includes a linked docx file that contains each of the custom styles so I do not have to link each Word style to the corresponding RH style every time I create a project for a different manual. My process is this: create project, link docx file, change Properties to create new TOC, Index, Glossary, Generate the linked document, Update linked document (when applicable), generate the AIR file, then update the Word document (in Word) as necessary. I then Update the linked document in RH and generate the AIR file again....and keep doing that until it looks good. So far, I have successfully created projects for 11 manuals with projects ranging in size from 20 to 50 MB. So I know the problem is not my styles, etc.
My problem is this....I will sometimes get the message 'Adobe RoboHelp 9 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available'. Sometimes, I will get the message when the manual has been updated in Word and I select Update in RoboHelp while other times it occurs when I am first getting the project set up. Right now, I am getting this message when I select Generate for the linked manual. I checked my application log file and see that I am getting an EventID 1000, Task Category 100 error. The manual is 477 pages/7.6 MB and the RoboHelp project is 42 MB and has only two really small flowcharts. I have successfully created a project for this manual a couple times before after updating the Word document for things I saw in the AIR file, but when I selected Update in RH, I would get the message and the project was then corrupt so I had to start over. I know it is not an installation problem because I can then open another project and it works fine.
Things I have tried without success: copied the linked manual to my C drive to remove the network aspect. Closed all other applications so only the Word document and RoboHelp are open. My experience has been that in most cases, RoboHelp is happier when I have the manual I am working with open in Word but have also tried it without Word running. I have tried creating the project on the root of C instead of in my folder. Tried it when no one else was on the network (5 am). In one case, I pulled out a chapter that was about 50 pages of flowcharts - which fixed that one. All our flowcharts are inserted into borderless tables as metafiles so they are not free-floating.
Any help anyone could give me as to why this is happening or what I can do differently so as to prevent this from happening would be greatly appreciated.
Thank you!
Kathi

My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi

Adobe RoboHelp 9 has stopped working

RH9 | WebHelp
I've copied an existing project and applied a new stylesheet. This has involved multiple "find and replace" actions in order to change old styles to my new styles. All was going well - everything looked fine and the project compiled without a problem. However, after further changes the compile has stopped working. As I start compiling the following message appears as the process starts updating files "Adobe RoboHelp 9 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I've tried deleting the CPD file, but it doesn't make any difference. I've also tried removing the last topics I've worked on, but again it's just the same.
Does anyone have any ideas? I've spent over a day re-styling the project and don't want to lose what I've done.
Thanks

Find and replace for style names done correctly should not cause this. If you searched for something like <p class="me"> and replaced it with <p class="you"> and that class was not quite what was in the CSS, RoboHelp would display your topics with the style name showing in block capitals rather than crash.
My first thought was that something else had been changed unintentionally and was causing this. Then I noted you said it had compiled the first time after you had made the changes. At the moment I am a bit stumped on what it could be.
The first thing I would try is to generate some other form of help, try Microsoft HTML Help (CHM). If that too fails, then you might have to go for working on a backup as below. However, if it works, I would then create a new webhelp layout by right clicking in the SSL and selecting Create New, not the Duplicate option. If that fails then you may have to work on a backup of the project before you did the find and replace, you did make one didn't you?
Ttake a fresh copy of the backup so that you retain an untouched copy. Then copy your new CSS from the broken project into a working copy of the backup using Windows Explorer. Manually apply a few of the styles to a few topics and then test compiling. If that works, then do the find and replace work again testing after each style has been changed. After each successful pass, create a backup in case it goes wrong at the next stage. Before you start any find and replace, post back what you are using for that.
Good luck and post back how you get on.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

HELP! Adobe PS Editor has stopped working

Similar Messages

Maybe you are looking for